You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Pelican 1605airnf Hard Carry Case With Liner, No Insert (orange)

Pelican 1605airnf Hard Carry Case With Liner, No Insert (orange)
  • Product Code: ga87260
  • Availability: In Stock

$820.65 $1,099.67

Built for strength and portability, the orange Pelican 1605AirNF Hard Carry Case is designed to be dustproof, fully watertight, and crushproof to protect your valuable gear against the harshest handling, shipping, and environmental conditions on the planet. This edition of the 1605Air comes lined, but without foam or other inserts, allowing you the freedom to completely customize the 26 x 14 x 8.4" interior to your specific needs and to your specific gear.

Your case is made of a super-light proprietary HPX2 polymer, with honeycomb structural elements, which is up to 40% lighter than most other Pelican polymers. Five newly designed dual push-button latches, arrayed on three sides of the case, provide ease-of-use versus previous iterations, and clamp the lid tight to keep dust, dirt, and water out. Case design features include an O-ring that seals it to an IP67-rating to be dust and waterproof, dual 5/16" (8mm) diameter stainless steel reinforced padlock holes, and a pressure relief valve. This valve regulates the internal pressure, keeping your gear and the case from getting crushed and allowing you to open the case without having to break a tough pressurized seal that may develop. A polycarbonate card holder may be placed on the front or side of the case.

Watertight, Dust and Crushproof Case    26 x 14 x 8.4" Interior Space    Made of Super-Light HPX2 Polymer    Redesigned Push-Button Latches    Customizable Empty Lined Interior    IP67 Watertight O-Ring Gasket    Pressure-Equalization Purge Valve    Stainless Steel Hasp Protectors    Rubber Overmolded Handle    Polycarbonate Card Holder

Key Specs
ColorOrange
Carry/Transport OptionsHandle
Type of ClosureLatch
Interior TypeEmpty
Water ResistanceWaterproof
IP67
DimensionsExterior
28.9 x 16.8 x 9.1" / 73.4 x 42.7 x 23.1 cm
Interior
26 x 14 x 8.4" / 66 x 35.6 x 21.3 cm
2" / 5.1 cm (Lid Depth)
6.4" / 16.2 cm (Base Depth)
Weight9.3 lb / 4.2 kg
Parameters
Camera CompatibilityUniversal
Carry/Transport OptionsHandle
Type of ClosureLatch
Interior TypeEmpty
Features
ATA CompliantNo
Pressure/Purge ValveYes
Security LockAccepts Padlock (Not Included)
General
Water ResistanceWaterproof
IP67
Maximum Buoyancy112.9 lb / 51.2 kg
Maximum Volume1.77 ft³ / 0.05 m³
MaterialsExterior: Polypropylene
DimensionsExterior
28.9 x 16.8 x 9.1" / 73.4 x 42.7 x 23.1 cm
Interior
26 x 14 x 8.4" / 66 x 35.6 x 21.3 cm
2" / 5.1 cm (Lid Depth)
6.4" / 16.2 cm (Base Depth)
Weight9.3 lb / 4.2 kg
Packaging Info
Package Weight11.55 lb
Box Dimensions (LxWxH)29.1 x 17.9 x 9.6"

Related Questions and Answers

Q: 1. This case is 62.2” LWH anyone have trouble in airplanes with a 62” limit?

A: Here's the secret: ***GO METRIC***. In metric the airlines give you 158cm which is 62.2047 inches. Bingo, problem solved. They also give you 23kg which is rounded to 51 pounds.

Q: 2. Why can't I get the silver 1605 with the TrekPak Insert combo?

A: At this time, you can only get the TrekPak Divider Kit for Pelican 1605 Air Case, BH # TRPA1605CI and the Pelican 1605 Protector Air Case (Silver, Empty) as separate items. http://bhpho.to/2KnW6Su http://bhpho.to/3gNLxUZ

Q: 3. I’d like to use this for a pair of Lite Panel Astra 6X’s. Can anyone clarify the interior dimensions of the padded insert trays without the small dividers in place?

A: While Pelican does not publish the dimensions of the insert trays on their own, theLitepanels Traveler Case Duo with Custom Foam for 1 Astra Soft and 1 Astra (Black), BH # LICF2A is modeled off of the Pelican Storm Case IM2750 and contains pre-cut inserts specifically for the Astra series panels. http://bhpho.to/2XUHNbE

Q: 4. It would be nice if you could have the option to fit a larger camera inside but the double tray system pretty much makes that impossible?

A: Yes, that is true. There may, however, be additional options available that better suit your needs and equipment than this one. Feel free to contact us for additional recommendations via chat, email or phone.

Q: 5. with the padded divider can you move around the insert to suit your camera gear?

A: You can move the padded internal dividers, the base is a padded box inside the rigid plastic case.

Q: 6. Does it fit the grey soft case of the Aputure LS 300x?

A: The Aputure LS 300x Bi-Color LED Monolight grey soft case will fit in the Pelican 1637AirNF Wheeled Hard Case with Liner, No Insert.

Q: 7. Can 2x Panasonic AG-UX180 video cameras fit inside this case with the double tray system?

A: Yes two Panasonic AG-UX180 video cameras will fit tightly into the Pelican 1637 Air Case.

Q: 8. Is this the 2020 model with the easy-snap latches?

A: This is not the newest version--this one is: https://www.bhphotovideo.com/c/product/1592648-REG/pelican_016070_0001_110_1607wf_air_case_with.html

Q: 9. I have a case can i buy the double Tray separate and from where?

A: I'm sorry we don't carry the divider set separately, please check with Pelican for that item.

Q: 10. I'm confused because there is also a Pelican 1637AirWF that costs more, and yet this version says it has foam. What is the difference?

A: The main difference is their physical weight, with the Pelican 1637 Air Case being lighter at 15.2 lbs while the Pelican 1637AirWFis 19.4 lbs.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Jason Cases Pelican Case For Canon Eos C70

$1,497.00 $2,365.26

Products You May Like

Alfa Case 32-36" Lockable Boomtube

$458.85 $605.68

Nisha 67mm Diffuser Filter

$44.85 $69.07