Protect your CamMic+ microphone with its own windscreen, the Saramonic CamMic+WS. This is a furry windscreen designed for outdoor, high-wind conditions. It helps mitigate annoying wind noise in a manner superior to foam windscreens. Thanks to the long-haired exterior and nylon interior, the windscreen offers two layers of sonic protection against wind, diffusing and reducing wind-borne sounds by up to 40 dB.

Measuring 5.5" long and 3.4" in diameter, this windscreen is tailor-made for the Saramonic CamMic+ camera-mount shotgun microphone. It will slip right over that shotgun mic's supplied foam windscreen.

For CamMic+ Shotgun Mics    Diffuses and Reduces Wind Noise    Up to 40 dB Max Wind Noise Attenuation    Long-Haired Exterior, Nylon Interior

Related Questions and Answers

Q: 1. Will this work with Rycote Super-Blimp for NTG shotguns? https://www.bhphotovideo.com/c/product/1246580-REG/rycote_010323_super_blimp_ntg_for_rode.html

A: Although specified for another windshield with a 17-inch length, the Rycote Hi-Wind Cover 4 Windscreen for Mono Modular Windshield 4 may also work with the Rycote Super-Blimp Kit for Rode NTG & Shotgun Mics, which has a specified length of 16 inches.

Q: 2. Does the version being shipped have the cutout for the gain control knob?

A: Yes, the Zoom WSH-6 Foam Windscreen for XYH-6 Microphone Capsule does have a cut out for the gain control knob.

Q: 3. will this fit a shure mxl clip on mic?

A: I'm guessing you might either have one of two models, the MX150 or the Motiv MVL, and this is not compatible with either. For MX150 the recommended clip is RPM150TC (3-pack Multi-position Tie Clip) and recommended windscreen is the RPM150WS (package of 3). If you have a Motiv MVL, the recommended snap-in clip is the AMVL-CLIP (1pc), and the windscreen is the AMVL-WS (1pc).

Q: 4. how does the microphone attach to the instrument?

A: The AMT WS has a clamp that attaches to the bell of the clarinet. It's dual mic configuration captures audio at both the bell and the keys to cover the full sound of the instrument. Its flexible gooseneck allows you to position the mics as desired.

Q: 5. Hi. Will this fit on the ZOOM iQ7?Thank you.

A: No.

Q: 6. do we put this under the bobcat or is this seperate?

A: Hi there, Nicholas: thanks very much for your question. This product is intended for use on its own (i.e. without/in place of our fur Windjammers). You can use it over the basket and then apply a Windjammer on top, but this mostly leads to reduced high frequency content, and doesn't have that much benefit in terms of additional wind protection. The HWC is a good option on its own if you need something less obtrusive than fur, or don't want to suffer as much HF loss c. 6000 Hz. That said, our fur is renowned for its high level of acoustic transparency, so the other/more important aspect to consider might be whether you intend to use your windshield in very windy conditions. For that, chose a Windjammer; for moderate winds, the HWC would perhaps be a good bet. Hope that helps! MF.

Q: 7. Will it fit " diameter lav mics, like the Audio-Technica AT803B?

A: Yes the Saramonic XM1-WS Furry Windscreen will fit the Audio-Technica AT803b model.

Q: 8. Is there a Windjammer (Furry Windshield) that can be put on the Zoom WSH-6 Foam Windscreen?

A: You can use the Auray Custom Windbuster for Select Zoom and Tascam Handheld Audio Recorders (B&H # AUWRWH4N) over the Zoom WSH-6 Foam Windscreen for XYH-6 Microphone Capsule.

Q: 9. Will The saramonic xm1 Windproof fit My saramonic blink500 b6 mic?

A: No, the Saramonic XM1-WS Furry Windscreen is only meant to work with the SmartMic and SR-XM1 microphones.

Q: 10. This is to be used without the dead cat? Or over it? If it's to be used without the dead cat, is it supposed to be better?

A: The Rycote 022524 Hi-Wind Cover for Rode Blimp is designed to fit directly over the windshield basket, without another windshield underneath.