The 6' Rocstor DisplayPort to HDMI Converter Cable lets you seamlessly connect your PC to your HDMI display. It supports ultra high definition (UHD) video resolutions up to 4096 x 2160 (4K x 2K), along with clear full audio (depending on your DisplayPort card support of audio passthrough) and HDCP (high-definition content protection). This cable is backward compatible with lower resolution displays and video sources. Unlike some other converter cables, this cable does not need a power source. For the ultimate connection, this cable provides gold-plated connectors and contacts and high purity BC conductors for excellent conductivity.

DisplayPort to HDMI    Supports 4K x 2K Resolutions    Compatible with Lower Resolutions    Gold-Plated Connectors & Contacts

Related Questions and Answers

Q: 1. Will this work on cameras other than the z-cam? Or is it proprietary?

A: This is for Z-Cam only.

Q: 2. I just bought this, but it's not working with a 1280x768 resolution. Any advice?

A: Sorry I do not have any advice. I too have a similar issue.

Q: 3. What is the part number for a replacement 5v power supply?

A: The power supply is not sold separately. If you wish one, we have been asked by KanexPro to say if you want one, please contact KanexPro directly. Support@kanexpro.com

Q: 4. Can I use this as generic HDMI to SDI converter with HDMI Loop out?

A: Yes, the Z CAM HDMI to SDI Converter can function as a generic HDMI to SDI converter with an HDMI loop out when powered through the barrel connector.

Q: 5. has anyone powered this unit with USB power instead of plugging it into the wall? Does it need to be plugged into the wall?

A: Hi Mark. The unit requires a 5 volt DC source at 2 amps. Any power supply of 5 volts DC with at least a 2 amp rating will power the unit. So, if you have a USB power supply of 5 volts that can supply the amp rating it should work. Please be aware of the polarity of the power supply you are using. And no, I have not tried powering the unit from a USB port or power supply, but it is a good question.

Q: 6. With this adapter allow 12-Bit ProRes RAW recording over HDMI to a monitor-recorder?

A: The Z CAM HDMI to SDI Converter is an HDMI to SDI converter, and is intended to take the HDMI output from Z Cams and convert it to an SDI 3-G format. If you want to record 12-Bit ProRes RAW from your Z Cam we recommend using your camera's HDMI output to send a feed to the Atomos Ninja V.

Q: 7. Will this Converter convert HDMI 1080p60 to SDI 1080i60?

A: I'm afraid not. This is a converter only, meaning it will only change the signal from HDMI to SDI. It does not do frame rate and resolution conversions as well. For that you would need to look at something like the DECIMATOR MD-HX Miniature HDMI/SDI Cross Converter with Scaling & Frame Rate Conversion, B&H # DEDDHX.https://bhpho.to/2fDbJBb

Q: 8. Looking to connect an HDMI cable from a Lenovo laptop to one of the display ports on an IOgear KVM switch. Will it work?

A: The Xcellon Display Port to HDMI Adapter will connect to an HDMI cable connected to a computer, and convert it to Display Port, so you can connect to a Display Port input

Q: 9. Where is it made?

A: The Country of Origin for this product is China.

Q: 10. How many frames of delay is there to the output of the SDI? I'm interested to see if this camera would work in a live production environment for IMAG.

A: The Z CAM E2 cameras have several frames of latency on the output that would unfortunately also pass to the Z CAM HDMI to SDI Converter.