Control your Angenieux EZ-1 or EZ-2 cinema zoom lens with your LANC or original Sony handgrip with this Compact Zoom Control Unit from Chrosziel. The control unit allows you to use your original Sony PXW-FS5, PXW-FS7, or PXW-FX9 handgrip or a LANC zoom controller to control the EZ-1 or EZ-2 lens zoom, and it includes the cables required.

The unit is powered using a separately available power source using its 10 to 30 VDC 5-pin LEMO-type power input, and a D-Tap to 5-pin power cable is included. A LANC cable and a LANC extension cable are both included to plug into the LANC input and output ports, and a Sony Multiport-to-LANC Y-cable is also included for the PXW-FX9. A mini-USB adapter is included for additional compatibility, and an Allen wrench is included to mount the unit onto your rig.

For LANC or Sony Zoom Handgrip Devices    Control Zoom on Angenieux EZ-1/EZ-2    LANC In/Out, 5-Pin LEMO-Type Power    Mini-USB Port & Adapter    D-Tap, Multiport & LANC Cables Included    Works with Sony PXW-FS5/FS7/FX9 Handgrip    Allen Wrench Included for Mounting

Angenieux EZ-1 and EZ-2 cinema zoom lenses

Sony PXW-FS5, PXW-FS7, and PXW-FX9 original handgrips

LANC zoom controllers

Related Questions and Answers

Q: 1. Is this an in-between adapter that connects lens-to-camera like that of a Metabones (or similar) adapter? Or does this replace the PL mount on the lens itself?

A: This is not an adapter, this is an actual E-Mount which you would install on the EZ-1 and EZ-2 Zoom Lenses to change the current mount on it. So that we may best assist you finding the proper product for your needs feel free to email us directly at askbh@bhphoto.com.

Q: 2. Don't understand the difference between one motor and three motor versions... can u detail differences? I don't understand why 3 motors are necessary.

A: The Single Motor option, BH #ANMSU1A, only has the Servo control for the Zoom. While BH #ANMSU1 is the FIZ option, FIZ stands for Focus, Iris and Zoom. It has 3 motors to control the Focus, Iris and Zoom.

Q: 3. Looking for a hood for a canon 17-120mm. Will this guy do the job, will it vignette?

A: The Angenieux Hood with Cap for Type EZ Zoom Lenses would not be compatible with a Canon 17-120mm.

Q: 4. Can I connect this via LBUS to Arri cameras/RIA-1 to make use of the run/stop feature?

A: The Angenieux MSU-1 Universal Cine Servo with 3 Motors & Wireless Module for EZ-1/EZ-2 Lenses (B&H# ANMSU1) does allow for start/stop, and the ARRI Radio Interface Adapter RIA-1 Set (B&H# ARRIA1S) does offer start/stop control. However, no cable is included for making a connection to the 4-pin LBUS port on the RIA-1.

Q: 5. I have a BlackMagic URSA Mini Pro, which has a PL mount and a 12-pin lens connector. Does the MSU-1 include the correct cable, or if not which cable do I need?

A: You will need a 12-Pin to 12-Pin Hirose Cine Camera/Servo Connection Cable. Angenieux CC1212 12-Pin to 12-Pin Hirose Cine Camera/Servo Connection Cable https://www.bhphotovideo.com/c/product/1397131-REG/angenieux_mvc_501_01_17_cc1212_12_pin_to.html

Q: 6. How does this attach to the lens and does it change any of its optical characteristics?

A: Angenieux has a video tutorial where they show you how to change the lens. https://www.youtube.com/watch?v=W40n1v43mEE

Q: 7. hi, is this working w / DZOFilm Pictor 20-55mm and 50-125mm T2.8 Super35 Zoom Lens?

A: No, the Angenieux MSU-1A Single-Motor Cine Zoom Servo for EZ-1 and EZ-2 Lenses is designed specifically for the Angenieux EZ-1 and EZ-2 lenses; it is not compatible with DZOFilm lenses.

Q: 8. This works for both S35 and FF configurations of the lens, right?

A: Yes, The Angenieux RF Mount for EZ Lens would support both Full Frame and Super35 sized sensors.

Q: 9. Does the E-mount adapter effect the focal length of the lens? I've primarily used the Wooden Camera PL adapter with the EZ2 on the Sony FX9 in the full 6K scan. Recently I used an EZ2 with the E-mount adapter on the same setup and the image seemed noticeably cropped.

A: no it does NOT, this is just a flange (FFD) matching adapter to allow the lens to mount, there are no optics in this adapter and it will and does not affect the lens focal length or optical performance

Q: 10. Any chance this would fit on a Fuji MK lens?

A: This product is designed for Angenieux EZ lenses. If you wish to have servo control with the Fuji MK lenses, please have a look towards Chrosziel Compact Zoom Control Kit for Fujinon MK Lenses B&H # CHCDMMKZ MFR # CDM-MK-Z. https://bhpho.to/2Ab9hR6