Built for presentations, conventions, and A/V integration, the 11x2 4K Presentation Switcher/Scaler with VGA/HDMI/YPBPR/CV/HDBaseT I/O from BZB Gear is a scaler and switcher featuring both digital and analog I/O options for corporate, education, or video production environments. It features 11 inputs, including four HDMI, four VGA, one component, one composite, and one HDBaseT, allowing you to input video from just about any video source.

The switcher allows you to input and output embedded audio, but it also allows you to extract the audio and output to speakers via analog and S/PDIF audio outputs. The HDBaseT connector supports PoE (Power-over-Ethernet), so you can power a transmitter and receiver to extend the video transmission to and from the switcher. You can control the switcher from either the front-panel buttons, RS-232 serial, IR remote, or by IP via a LAN.

11x2 Video Switcher    Hardware Scaling and Processing    Various Video Input Formats    Can Work as Splitter or Dual Switcher    De-Embedded Audio to 3.5mm or S/PDIF    HDMI, VGA, RCA, Component, HDBaseT Input    HDMI and HDBaseT Output    IP, IR, or RS-232 Control

Transmit video resolutions up to 4K30

Front-panel status LCD

HDBaseT output transmits up to 330' over Cat 6 cable and supports PoE

Video inputs include four HDMI, four VGA, one Component, one Composite, and one HDBaseT

Simultaneous HDMI and HDBaseT output

Controllable via front panel, IR, IP, or RS-232 serial

Output audio via 3.5mm analog or S/PDIF for embedding or de-embedding

Scaling from 640 x 480 to 1920 x 1080p60

Built-in Ethernet hub

HDCP 1.4 support

Related Questions and Answers

Q: 1. does the signal hold on an inactive port? meaning if I have a computer connected to input 1, and I switch to input 2, does the computer on input 1 think that it has lost the connection?

A: We are not sure of the process but we know that you do not lose the signal and that you can switch back and forth at any time.

Q: 2. Does this support Dolby Vision, Dolby Atmos? Does this also support, 4:4:4?

A: Yes it does. According to IO Gear this supports Dolby Vision, Dolby Atmos and also supports 4:4:4.

Q: 3. Does this switcher work with apple TV units? The switcher I currently have does not and I have to plug the apple TV directly into my TV's HDMI port.

A: This switcher is HDCP Compliant, it should work with an Apple TV.

Q: 4. I understand the "Mute" button on the front of the unit mutes the audio output. Can this button also be configured to blank the video like the "Blank" button on other models?

A: The mute button on the Kramer VP-550X is not programable to other functions.

Q: 5. Does this camera have actual ePTZ functions? ie can I control virtual pan and tilt from a PTZ controller or serial control?

A: The BZBGEAR 4K ePTZ USB/HDMI Conference/Education Camera (B&H # BZGEPTZUH4K) supports ePTZ control of the 4x digital zoom function at 1080p resolution. This camera can be controlled via the included IR remote.

Q: 6. How does the RS232 implementation work. There is only 1 RS232 input on the amplifier. Does it duplicate the RS232 commands out to the individual receivers?

A: Correct, the RS-232 input on the main unit of the BZBGear 1x8 UHD 4K 18 Gb/s HDMI-over-HDBaseT Splitter/Distribution Amplifier ins the main point of entry/exit for the RS232 signal which is then embedded in each individual RJ45 output.

Q: 7. Is the length of 393' (4K) per receiver or the total for all four receivers combined?

A: The limit is 393 feet per receiver.

Q: 8. The description says that auto-switching is supported. How does this work? As such, is the IR remote required to change the in

A: You could work with the front Input button on the BZBgear 4X1 8K UHD ULTRA SLIM HDMI 2.1 SWITCHER (8K60, 4K120HZ 4:4:4 10BIT) to control Auto-Switching. INPUT button ▪ Short press this button to circularly select signal source. ▪ Long press this button for 3 seconds to enable the auto switching mode. Pg7 Manual: https://bhpho.to/4aB5x8o

Q: 9. Do HDBaseT receivers come with this switcher?

A: Yes, Four HDBaseT receivers are included with the Alfatron MUH44E 4x4 4K HDBaseT Matrix Switcher.

Q: 10. Can it be set to always switch manually? I don't want it to switch automatically when a new source is connected. But I don't want to have to set this option every time I use it... How does it work?

A: hi from remote control can not change.i now if you off source 1 it will go to souce 2 auto