This 12" interchangeable 3200K Phosphor Panel for Matchstix LED Light from Cineo Lighting allows the fixture to achieve a high CRI rating of 98 and a TCLI rating of 99. Ratings this high indicate very precise and accurate rendition of color.

Matchstix 12" 3200K Phosphor Panel    Single Unit Power Supply    6' Barrel Extension    T-Slot Adapter

Related Questions and Answers

Q: 1. How many lumens does this lamp produce?

A: At 5600 K and within 3 ft from the subject, this panel produces 35 foot candles, which is about 377 lumens.

Q: 2. I've purchased the Godox DP 800III, 600III and 400III. They each have a modeling bulb is labeled JDD E26 110130v 150w. This is the same label on the replacement SK400II. Do all these strobes use the same modeling bulb?

A: Yes, the Godox DP 800III, 600III and 400II use the same modeling lamp.

Q: 3. How often do you have to replace these modeling light bulbs?

A: The following tubes should be replaced every 12-18 months.

Q: 4. what is the Cri rating? Can i use is as a Video light with sk 400ii instead of buying separate sl60w?

A: The Godox Modeling Lamp for SK400II Flash Head (150W) is a tungsten quartz modeling light. It is not used to light a subject per se, but instead is for judging what the strobe might look like. The manufacturer does not list a CRI for this flash head. The color temperature is around 3000K, unlike the flash tube, which is 5400K (daylight).

Q: 5. How many Watts does this light draw at Maximum Output?

A: The Cineo Lighting Maverick3 High Output Studio Kit BH #CIBT9010079 is a 120w light.

Q: 6. Can this lamp been used for all godox speedlights with 150W modeling lamps?

A: This modeling lamp can be used in any of the Godox monolights that use a 150w modeling lamp.

Q: 7. Could you use a standard LED bulb on the dp400iii at a more desirable color temp (5600K)?

A: You could use an led in theory but only if you found one one in this shape with the same bulb type that would fit. Generally they are wider and would interfere with the flash tube. The bulb needs to be e26/e27 and of this narrow shape and be 150W or less. We do not sell an led in this size and shape.

Q: 8. does this fit the Impact qualite V-2012?

A: Francisco, the Impact Qualite 300 is only rated to 300w, and the DYS lamp is a 600w lamp. I would not recommend using it in this fixture, as damage or personal injury could result. I would recommend the Ushio JCD-120/300W lamp for this fixture: a href= http://www.bhphotovideo.com/c/product/809258-REG/Ushio_1000896_JCD_750W_Lamp_300W_120V.html target= _blank http://www.bhphotovideo.com/c/product/809258-REG/Ushio_1000896_JCD_750W_Lamp_300W_120V.html/a

Q: 9. Does this lamp cast a yellow color onto your model? Is there an LED modeling lamp alternative with a higher CRI that would fit into a Godox DP 400 III?

A: This Godox modeling lamp tungsten-balanced, so using it as a main source would create a warmer color temperature in your image if the white balance in the camera is not set properly. Unfortunately, there is no LED equivalent that can be used with the SK400 II that would not interfere with the flash tube.

Q: 10. how many lumens does it produce?

A: The Godox Modeling Lamp for SK400 II Flash Head has a close equivalent to 1250 lumens.