From Sescom, this is a 50' 5-Pin XLR Male to 5-Pin XLR Female Plenum Lighting Control Cable designed for sending control data to computerized DMX lighting fixtures. It features a West Penn 24 AWG cable with a flexible plenum jacket and has Neutrik connectors with chuck-type strain relief. The cable meets DMX512 specifications to ensure reliable data transmission.

Send Control Data to DMX Fixtures    West Penn 24 AWG Plenum Cable    Neutrik Connectors with Strain Relief    Meets DMX512 Specifications

Related Questions and Answers

Q: 1. Will this work the Synco D2 shotgun microphone (needs phantom) plugged into a passive Beachtek audio adapter?

A: No, the Deity Microphones V-Link 3.5mm TRS Male to XLR 3-Pin Male Microphone Adapter Cable will not work with the Synco Mic-D2 Hypercardioid Shotgun Microphone because it has a male XLR connector and the mic requires a female XLR connector. The V-Link Adapter Cable is intended for use with a microphone that has a 3.5mm output and requires plug-in power, but needs to connect to an XLR input. This cable does not allow phantom power to pass through to the microphone. It has a built-in phantom power converter that converts phantom power to 3 to 5V of plug-in power. The Mic-D2 needs to connect to an XLR mic input that can supply 48V of phantom power for the mic to operate.

Q: 2. Are there replacements for the non ear piece cushion?

A: There are currently no replacements available for the small cushion on the Senal SMH-1010CH Single-Sided Communication Headset with 5-Pin XLRM Cable for Telex System.

Q: 3. Can this be used with Shure WBH54 connecting to a standard jack with plug-in power (Rode AI-Micro)?

A: The TecNec TA4M-MPS-1.5 4-Pin Mini XLR Male to 3.5mm Stereo Cable would properly convert the connection of the Shure WBH54 microphone to connect it to a device such as the Rode AI-Micro. However, the operating voltage of the WBH54 is specified at 5V and the Rode AI-Micro's list of compatible microphones all run around 2.5V, so it is uncertain whether the AI-Micro would supply the power necessary through the Tecnec cable and back to the WBH54.

Q: 4. Do I need a DMX controller to adjust color temp and dimmer or can I use the buttons on the panel and adjust locally? The only downside of the Astras is that I can’t dial in dimmer and color temp.

A: Aside from connecting a DMX controller, you can adjust the color temperature and intensity locally on this adapter, which is shown on the display.

Q: 5. It lists the 5DMII. Is it compatible with the 5DMIII?

A: The 5DmkII and 5D mkIII feature the same mic input jack. The Sescom cable is compatible with both cameras.

Q: 6. Can I use this to connect the Deity HD-TX to my camera?

A: In theory, yes, the Deity Microphones V-Link 3.5mm TRS Male to XLR 3-Pin Male Microphone Adapter Cable could be used to connect an output signal from a camera's 3.5mm headphone jack to the XLR input on the Deity Microphones HD-TX Plug-On Transmitter with Built-In Recorder.

Q: 7. Will this 4 pin mini XLR connect into the 4 pin TA4F of the Shure SM31 fitness headset?

A: No. The conversion to 3.5mm will not provide the required power to the SM31 Headset Mic.

Q: 8. I'd like to use a Shure WL183 mic, with a Sennheiser SK100 body pack. Will this cable do the job?

A: I'm afraid not.

Q: 9. Can this be used to connect crown 311 headset microphone to a senheisser bodypack

A: Our cable is wired straight thru (1 to 1, 2 to 2), with pins 3 & 4 bridged with a buss wire to the sleeve of the 3.5mm TRS. You will need to confirm the pin configurations of the Crown headset and Sennheiser bodypack to confirm compatibility. Thanks!

Q: 10. Can this dimmer pack be used with the Altman 70W Star Par CDM Par Light (https://www.bhphotovideo.com/c/product/392139-REG/Altman_SPCA11070_70W_Star_Par_CDM.html)?

A: Yes you can use the Altman 70W Star Par CDM PAR Light with this dimmer pack but you will need to add the Altman Edison Connector, 5-15P - Male, 15 Amps, B&H # ALEC15M to the cable. https://bhpho.to/2OBnePE