The 1' Hirose HR10A 4-Pin Male to 2.1mm Right Angle DC Output Power Cable from Laird Digital Cinema is designed for use with common broadcast camera systems from Sony, Hitachi, and other popular brands. It allows you to power various accessories from the camera, such as script lights and small video monitors. The cable is wired to Sony and industry standards: Pin 1 = GND, Pin 4 = 12 VDC.

For Cameras from Sony, Hitachi & More    Power Accessories Such as Script Lights    Pin 1 = GND, Pin 4 = 12 VDC

Related Questions and Answers

Q: 1. Can this be used to go from the XLR outputs on a mixer board to the rode wireless go 2 TX unit inputs

A: I'm sorry, but the Cable Techniques 3.5mm TRS Right Angle to Two 3-Pin XLR Male Tape Output Y-Cable Adapter that you asked about would not allow you to output from a mixer into a wireless transmitter. Most mixers will have XLR male outputs, so you will need female XLR connectors on the cable. Additionally, the Rode Wireless Go II transmitter will only accept input from a mic level source. The cable that I am linking below has the correct gendered connectors, and also has a built in attenuator to lower line level to mic, so that you can successfully send the stereo line signal into the transmitter: https://bhpho.to/3IdRNCf

Q: 2. how long is the arm and how long the riser piece?

A: The long part of the Kupo Snap-In Right Angle Pin is approximately 6 inches (14.84 cm) in length, while the shorter 90 riser is approximately 3.6 inches (9.2 cm) in length.

Q: 3. I need to power a BH#LESMV19Q, using BH#LEBESM with my Sound Devices 833 SL-2 DC Hirose 4-pin output. Would this cable work?

A: No, the CAMVATE C2725 DC 2.5mm to 4-Pin Male Right-Angle Power Cable for Sound Devices and Zoom Field Recorders is not compatible for use with the Lectrosonics SMBATELIM Battery Eliminator for SM Transmitters (B&H # LEBESM), which requires a locking DC barrel connector. Instead, you can use the Deity Microphones SPD-HR25 4-Pin Hirose to 2.5mm Locking DC Barrel Jack Cable (B&H # DESPDHR25).

Q: 4. will this cable provide 12v power !!! more power for the motor ?

A: Unfortunately, the manufacturer does not provide that exact spec.

Q: 5. will this let me connect my rode wireless go II into XLR connections on a mixer to input mics? Fully supported and safe?

A: Yes, the Cable Techniques 3.5mm TRS Right Angle to Two 3-Pin XLR Male Tape Output Y-Cable Adapter for Sound Devices should support the output signal from the receiver in the Rode Wireless GO II System and allow the isolated output of each receiver channel into separate XLR mixer inputs.

Q: 6. can this be used to power the zhiyun crane 3s pro power pack?

A: This cable is used to power your Canon Cinema Cameras (c200 or C300 mk II) from the Zhiyun Crane Power pack. It can not be used to recharge the Pro Power pack. It is best to purchase additional 18650 batteries (the batteries inside the power pack) and swap them out as necessary.

Q: 7. What's the inner diameter (ID) of this barrel connector?

A: The Tilta 12V USB-C to 3.5mm DC Male Power Cable (Right-Angle, 15.7") offers a 1.35mm x 3.5mm barrel connector.

Q: 8. Will this cable be able to supply power from a smallrig v mount 99 battery to the Osee T5+ monitor?

A: No, the Tilta Micro-USB to Right-Angle 2.1mm DC Motor Power Cable for Nucleus-Nano will not be able to supply power from a SmallRig VB99 Mini V-Mount battery to an OSEE T5+ monitor.

Q: 9. To what length does it stretch without damaging it?

A: The Sennheiser CL 35-XLR Right-Angle Locking 3.5mm TRS to XLR Male Coiled Output Cable can stretch to about 22" safely.

Q: 10. I'm buying this to connect a Zoom F8n Pro to a SmallRig L-Series/NP-F Battery Adapter Plate (Professional Edition) BH #SMMPFBAPPE MFR #3168. Will this work? My battery is Sony brand infoLithium NP-F970.

A: Yes, the CAMVATE DC 2.5mm to 4-Pin Male Right-Angle Power Cable for Sound Devices and Zoom Field Recorders should work with the SmallRig L-Series/NP-F Battery Adapter Plate's 12V (DC 5525 - 2.5mm) DC output connection to power the Zoom F8n Pro via Hirose connection.