Transmit uncompressed 1080p60, 10-bit, 4:2:2 video from up to 984' away to a Ghost-Eye receiver with the Ghost-Eye Wireless 600MP HD/SDI Video Transmitter V3 from CINEGEARS. It safely can transmit video using its two antennas on up to ten frequencies to any Ghost-Eye receiver. It features one HDMI input, one 3G-SDI input, and one SDI loop output.

Whether you have a point-to-point or point-to-multipoint configuration, your signal is carried with a low-latency rate of less than 1 ms over the license-free 5 GHz frequency band. Small obstacles in the line-of-sight are compensated for by an adaptive signal logarithm keeping your transmitter and receiver connected, and the transmitter also supports optional AES-128/256 signal encryption. For safety, signals dropped due to interference or a loss of line-of-sight are automatically relinked within 1 ms of the obstacle being removed. The 600MP transmitter comes with an L-series battery mount and two antennas.

Uncompressed 1080p60, 10-Bit 4:2:2 Video    984' Wireless Range    HDMI and SDI Inputs, SDI Loop Output    Low Latency of <1 ms, Auto-Relink    Uses License-Free 5 GHz Frequency Band    Adaptive Small Obstacle LOS Compensation    Optional AES-128/256 Encryption    Waterproof and Shockproof Design    L-Series Battery Mount

Receive uncompressed 1080p60, 10-bit, 4:2:2 video from up to 984' away

Cross-compatible with all Ghost-Eye models

Works with multiple receivers simultaneously

Less than 1 ms of latency

Operates on the license-free 5 GHz frequency band

One HDMI input, one SDI input, and one SDI loop output

Adaptive signal logarithm compensates for small obstacles in the line-of-sight

Auto-relink

Optional AES-128/256 signal encryption

L-series battery plate

Related Questions and Answers

Q: 1. Is this compatible with the Cinegears 150m Receiver?

A: No this is Not compatible with the Cinegears 150m Receiver

Q: 2. Hello! I was curious to what the major difference between an unencryprted transmitter and an encrypted one were, and if the Ghost-eye 600mp receiver would work with this version if it were a unencrypted one?

A: and unencrypted receiver will not work with an encrypted transmitter

Q: 3. Does it get interrupted by wifi/cell signals?

A: Flawless signal at ballroom which have around 2000 person most of them have cell phones

Q: 4. Does this transmit audio over both the SDI and HDMI? My unit does not seem to have audio and I can't find a setting for it.

A: It should transmit audio. Check the output of your camera

Q: 5. how much does an L-Battery Last? NPF-970 or 990

A: We used a SWIT battery Sony equivalent for a hockey game, which is around 3 hours and we had no problems. The Sony 970 should be the same.

Q: 6. it says you can power the transmitter via dtap butcan you power the reciever with a d tap?

A: Yes, both tx and rx can be powered via p tap to 2 pin lemo cables.

Q: 7. Why would I want to buy a 200M or a 150M or any other version of the Cinegears transmitters over this one given the price point of those and this one?In other words... I'm trying to figure out why it's so inexpensive compared to similar models in the past or lesser-performing current models.

A: From the research I've done, it would seem the main difference is signal resiliency. The 600MP model receiver has no external antennae and though it has a range of 600m like it's Ghost-Eye 600M sibling, it is more susceptible to drop-out when you lose line of sight. Because the 600M has those external antennae connectors, this means it also allows connecting the large panel antenna to extend range even further. Take that info and apply it to the 200M - yes, it is only 200 meter range, but it seems the signal is more resilient to objects that would block or interfere. That might mean that in an interior situation the 200M could possibly outperform the 600MP but in an open environment with clear line-of-sight, the 600MP would operate at a range far beyond the 200m limitations of the Ghost-Eye 200M. This is all based on what I could gather on-line so hopefully the manufacturer will chime in and confirm or dispute...

Q: 8. When utilizing the 3G-SDI and HDMI I/O and Cross Conversion is the audio feed brought over as well. EG: Can I output Video/Audio from my camera's SDI and watch/listen to it on my HDMI monitor?

A: Yes, the audio should travel as well when cross converting with this product.

Q: 9. Which receiver should I use with this transmitter?

A: The Ghost-Eye 600MP Transmitter works with the Ghost-Eye 600MP Receiver. At the time of this posting we do not sell just the receiver. However we do have this same Transmitter in a Kit with a receiver, B&H # CI6635. You may want to consider purchasing this kit for both a Transmitter and Receiver. https://bhpho.to/2BGCwu2

Q: 10. Which end connects to the camera, the transmitter or receiver?

A: With systems like this you Transmit the signal from the camera to a monitor that has a receiver on it. The Transmitter will go with the camera.