You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Laird Digital Cinema Mini-rg59 12g-sdi/4k Uhd Right-angle Bnc To Right-angle Bnc Cable (black, 6')

Laird Digital Cinema Mini-rg59 12g-sdi/4k Uhd Right-angle Bnc To Right-angle Bnc Cable (black, 6')
  • Product Code: ga88492
  • Availability: In Stock

$158.85 $195.39

The 6' Mini-RG59 12G-SDI/4K UHD from Laird Digital Cinema is a flexible, lightweight BNC cable that supports up to 12G-SDI/4K UHD video transmissions while measuring less than 1/8" in diameter. This 23 AWG cable consists of a Belden 4855R 4K RG59 sub-mini cable with a right-angle male BNC connector on each end.

75-Ohm Belden 4855R 4K RG59 Cable    For up to 12G-SDI 4K UHD Transmissions    1/8" Diameter, 23 AWG Sub-Mini Design    Right-Angle Male BNC Connectors    Silver-Plated Copper Conductor    Duofoil/TC Outer Braid Shield    FHDPE Insulation/PVC Jacket    Meets ST-2082-1/ST-2081-1/424M Standards

General
Connector 11x BNC
Connector 21x BNC
Coaxial TypeRG-59
Cable Length6' / 1.8 m
Environmental
Conductor MaterialSilver-Plated Copper
Insulation TypeFoam High Density Polyethylene (FHDPE)
Jacket TypePolyvinyl Chloride (PVC)
Outer Diameter0.125" / 3.17 mm
ShieldedYes
Wire Gauge23 AWG
Weight2.5 oz / 71 g
Packaging Info
Package Weight0.245 lb
Box Dimensions (LxWxH)8.3 x 8.1 x 1.9"

  • Sub-miniature Belden 4855R cable supports up to 12G-SDI 4K video
  • Low-profile, lightweight design

Thin cable diameter of less than 1/8" provides greater flexibility

A right-angle male BNC connector on each end enables neater dressing on your rig

Related Questions and Answers

Q: 1. Is this compatible with the Lumix BGh1 cameras? The camera I have isn't receiving the timecode signal.is it the camera or the cable?

A: Yes, the Tentacle Sync C08 Tentacle to BNC Cable can be used to feed timecode signal from a Tentacle Sync timecode generator into the BNC timecode input on the Panasonic Lumix BGH1 Box Cinema Camera.

Q: 2. Can I use this to jam the blackmagic video assist 5 inch 12g?

A: No, the Deity Microphones C15 Right-Angle Locking 3.5mm TRS to Right-Angle BNC Timecode Cable is intended for use with the Deity Microphones TC-1 Wireless Timecode Generator Box (B&H # DEDTT0272D80) which uses a locking 3.5mm connector. The BNC connector would be for connection to the timecode input on the device that you are connecting to. The Blackmagic Design Video Assist 5" 12G-SDI/HDMI HDR Recording Monitor has a non-locking 3.5mm audio input, so if you are jamming timecode to the audio input you need a cable that has a non-locking 3.5mm TRS connector. If you are feeding timecode from a device with BNC timecode output, you can use the Tentacle Sync Tentacle to BNC Cable - Right-Angle, 16" (B&H # TEC08) or the Tentacle Sync Tentacle to BNC Cable - Straight, 16" (B&H # TEC06).

Q: 3. Does this cable support 4k?

A: This cable supports 4K.

Q: 4. Can I plug this cable in to a ZV-E1F?

A: Technically yes, you could plug the TRS connector of the Deity Microphones C15 Right-Angle Locking 3.5mm TRS to Right-Angle BNC Timecode Cable into the Sony ZV-E1's 3.5mm audio input, but this won't accomplish anything. The 3.5mm tip of the cable is meant to connect to the Deity TC-1's timecode output, and the BNC connector goes into a camera's BNC timecode input. The ZV-E1 doesn't have a BNC timecode input, or any timecode input at all.

Q: 5. Will this work with my c70 and Tentacle Track E?

A: No, the Deity Microphones C15 Right-Angle Locking 3.5mm TRS to Right-Angle BNC Timecode Cable is not compatible for use with the Tentacle Sync TRACK E Pocket Audio Recorder. Instead, you can use the Tentacle Sync Tentacle to BNC Cable - Right-Angle, 16" (B&H # TEC08) or the Tentacle Sync Tentacle to BNC Cable - Straight, 16" (B&H # TEC06).

Q: 6. how long is this cable?

A: The Deity Microphones C15 Right-Angle Locking 3.5mm TRS to Right-Angle BNC Timecode Cable is 19 inches long.

Q: 7. Does this cable fit in the plastic bracket provided with a Tentacle Sync mkii?

A: The Kondor Blue BNC to 3.5mm Right-Angle Timecode Cable for Broadcast Cameras (10") does not fit the plastic bracket provided with a Tentacle Sync mkii.

Q: 8. Will this work with a Panasonic AU-EVA? With its BNC timecode in from a Tentacle Sync E Mk II, specifically.

A: Yes, the Tentacle Sync Tentacle to BNC Cable can be used to send timecode signal into the Panasonic AU-EVA1 Cinema Camera's BNC timecode input connection from a Tentacle Sync E.

Q: 9. Would this work to connect an Alexa mini to the beachtec DXA-Red outputs, and record audio?

A: This cable is not designed to send audio into the Alexa Mini. The DXA-Red is meant to connect to the Red DSMC2. If attempting to connect the DXA-Red to the Alexa mini, you may need to have a custom cable created.

Q: 10. How flexible is this cable compared to something like the ZILR 12G-SDI BNC cable?

A: The Kondor Blue 12G-SDI Cable for 4K60 Camera Monitors and Transmitters (Black, 20") is less flexible than the ZILR 12G-SDI BNC Cable (17.7").

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Ikegami 31" Uhd 4k Lcd Monitor

$52,500.00 $67,725.00

Swit 23.8" Uhd 4k/8k 12g-sdi Hdr Studio Lcd Monitor

$18,747.00 $25,308.45

Sharp Pn-me552 55" Uhd 4k Hdr Commercial Monitor

$2,907.00 $4,040.73

Newline Stv-9824 98" Uhd 4k Commercial Monitor

$19,797.00 $24,350.31

Samsung Qh55c 55" 4k Uhd Commercial Monitor

$4,200.00 $5,166.00

Hisense Dm66d Series 86" Uhd 4k Commercial Monitor

$11,505.00 $18,292.95

Lg Uh7n-e 65" Uhd 4k Commercial Monitor

$7,041.00 $8,942.07

Samsung Qh43c 43" 4k Uhd Commercial Monitor

$2,760.00 $3,588.00

Samsung Qh65c 65" 4k Uhd Commercial Monitor

$5,790.00 $8,453.40

Products You May Like

American Dj Hydro Spot 2 Ip65-rated Led Moving Head

$11,999.97 $14,759.96

Cartoni Mid-level Sds Smart Spreader

$1,316.01 $1,750.29

Sanken Cos-vinyl Case (replacement)

$120.00 $158.40

Nikon 10x42 Monarch M7 Binoculars

$1,310.85 $1,861.41