The 18" Mini-RG59 12G-SDI/4K UHD from Laird Digital Cinema is a flexible, lightweight BNC cable that supports up to 12G-SDI/4K UHD video transmissions while measuring less than 1/8" in diameter. This 23 AWG cable consists of a Belden 4855R 4K RG59 sub-mini cable with a right-angle male BNC connector on each end.

75-Ohm Belden 4855R 4K RG59 Cable    For up to 12G-SDI 4K UHD Transmissions    1/8" Diameter, 23 AWG Sub-Mini Design    Right-Angle Male BNC Connectors    Silver-Plated Copper Conductor    Duofoil/TC Outer Braid Shield    FHDPE Insulation/PVC Jacket    Meets ST-2082-1/ST-2081-1/424M Standards

• Sub-miniature Belden 4855R cable supports up to 12G-SDI 4K video
• Low-profile, lightweight design

Thin cable diameter of less than 1/8" provides greater flexibility

A right-angle male BNC connector on each end enables neater dressing on your rig

Related Questions and Answers

Q: 1. Is this compatible with the Mini Lf?

A: Yes, it has a 5 pin Lemo connector for the Mini LF: Use the Tentacle to ALEXA Mini Cable Right Angle 12" to feed a timecode signal from a Tentacle Sync timecode generator to an ALEXA Mini camera. This cable features a right-angle, 3.5mm Neutrik mini-TRS jack connection to the Tentacle unit.

Q: 2. Is this compatible with the Lumix BGh1 cameras? The camera I have isn't receiving the timecode signal.is it the camera or the cable?

A: Yes, the Tentacle Sync C08 Tentacle to BNC Cable can be used to feed timecode signal from a Tentacle Sync timecode generator into the BNC timecode input on the Panasonic Lumix BGH1 Box Cinema Camera.

Q: 3. Would this work to connect an Alexa mini to the beachtec DXA-Red outputs, and record audio?

A: This cable is not designed to send audio into the Alexa Mini. The DXA-Red is meant to connect to the Red DSMC2. If attempting to connect the DXA-Red to the Alexa mini, you may need to have a custom cable created.

Q: 4. will this work to send timecode from Rode Pro RX to C70 ?

A: Yes, the Tentacle Sync Tentacle to BNC Cable (Right-Angle, 16") can be used with the Rode Wireless Pro receiver in TC Only mode.

Q: 5. Will this work with a Panasonic AU-EVA? With its BNC timecode in from a Tentacle Sync E Mk II, specifically.

A: Yes, the Tentacle Sync Tentacle to BNC Cable can be used to send timecode signal into the Panasonic AU-EVA1 Cinema Camera's BNC timecode input connection from a Tentacle Sync E.

Q: 6. Will this work with my c70 and Tentacle Track E?

A: No, the Deity Microphones C15 Right-Angle Locking 3.5mm TRS to Right-Angle BNC Timecode Cable is not compatible for use with the Tentacle Sync TRACK E Pocket Audio Recorder. Instead, you can use the Tentacle Sync Tentacle to BNC Cable - Right-Angle, 16" (B&H # TEC08) or the Tentacle Sync Tentacle to BNC Cable - Straight, 16" (B&H # TEC06).

Q: 7. Can I use this to jam the blackmagic video assist 5 inch 12g?

A: No, the Deity Microphones C15 Right-Angle Locking 3.5mm TRS to Right-Angle BNC Timecode Cable is intended for use with the Deity Microphones TC-1 Wireless Timecode Generator Box (B&H # DEDTT0272D80) which uses a locking 3.5mm connector. The BNC connector would be for connection to the timecode input on the device that you are connecting to. The Blackmagic Design Video Assist 5" 12G-SDI/HDMI HDR Recording Monitor has a non-locking 3.5mm audio input, so if you are jamming timecode to the audio input you need a cable that has a non-locking 3.5mm TRS connector. If you are feeding timecode from a device with BNC timecode output, you can use the Tentacle Sync Tentacle to BNC Cable - Right-Angle, 16" (B&H # TEC08) or the Tentacle Sync Tentacle to BNC Cable - Straight, 16" (B&H # TEC06).

Q: 8. How flexible is this cable compared to something like the ZILR 12G-SDI BNC cable?

A: The Kondor Blue 12G-SDI Cable for 4K60 Camera Monitors and Transmitters (Black, 20") is less flexible than the ZILR 12G-SDI BNC Cable (17.7").

Q: 9. Is this compatible with Deity TC-1 ?

A: No, the Tentacle Sync C13 Tentacle to ALEXA Mini Cable is not compatible for use with the Deity Microphones TC-1 Wireless Timecode Generator Box. The TC-1 uses a locking 3.5mm connector and the Tentacle C13 cable has a non-locking 3.5mm connector. Instead, you can use the Deity Microphones C13 Right-Angle Locking 3.5mm TRS to Right-Angle 5-Pin LEMO Timecode Cable for Arri Alexa Mini (B&H # DEDTS0272D60).

Q: 10. Will this work on a breakout box with 2 pin lemo female connection? This is just a right angle version of there straight 2 pin correct?

A: This is specifically made for the Alexa Mini Camera.