The LiteCloth 2.0 Boosted 160W LC-120 1x3 Foldable LED Mat Kit was put together by Intellytech for imaginative imagers makers who realize the potential in shaping their quality of light by literally shaping the light source. The kit includes one LC-120 12 x 36" foldable LED mat with a softbox, a diffuser, a fabric grid, a controller with AC adapter, a V-mount battery plate, and a directional mounting bracket. A hard case is also included for storage and transport.

With a thickness of just under an inch, the LiteCloth is a lightweight fixture that folds to just 12 x 12" for storage and transport. The mat can be used horizontally or vertically while a redesigned directional bracket allows you to employ the folding three-section mat in a 1 x 1', 1 x 2', or 1 x 3' configuration. The two end sections can be used as LED-powered barndoors for the center section to direct and boost the output and enable selective lighting. The LC-120 has a remarkably wide variable color range of 3000 to 10,000K with high CRI and TLCI ratings of 97 and 98 for superior color rendering to meet the challenge of any ambient light conditions, match other fixtures, or just to shoot creatively. Light intensity is variable too, from 0-100%. Both functions can be controlled directly on the LC-120, with an optional remote controller, or with your smartphone via an Intellytech app.

The softbox takes the edge off the bright LEDs and the included fabric grid narrows the light's beam, adding directional control for selective lighting. The LC-120 is ready for worldwide use, thanks to its 100 to 240V universal AC controller, but it can also run on batteries via its V-mount battery plate.

3000-10,000K CCT, CRI 97 | TLCI 98    100-240 VAC Controller, Dims 0-100%    Softbox, Diffuser with Grid    Folds to 12 x 12" for Travel    Mount Bracket, Optional App Control    Hard Case

The LC-120 2.0 is a 160W, 1x3' LED mat weighing just 2 pounds that folds down to a 12x12" square. This unique design allows the user to create broad, bright, natural looking light that can be setup fast and travel small.

The redesigned 2.0 LiteCloth controller now has the AC built-in, allowing for a faster and simpler setup.

Thread-less, click in and out for fast, precise, and secure connections. This applies to the 4-pin cable on the LED mat as well as the powerCON cable for AC power.

Built with 9 different effects. Each effect can be programmed according to speed and intensity.

Control a single light or groups of lights via the Intellytech LiteSync app.

For peace of mind and additional mounting options, each LC-120 2.0 is fitted with 8 high-strength metal grommets. Also included are 2 grommet ties as an optional mounting point between your LiteCloth and bracket.

Reaching 160W, the LC-120 is equivalent to a 1200W tungsten soft light. Even without using the including softbox, the LC-160 creates a vast spread that will wrap around your subject.

The LC-120 has a firm backing behind the mat, but can also fold down at its collapsible cross sections. This unique form factor allows for the light to be mounted in seconds without the need for a giant metal frame or x-bracket. In addition, users can now travel with a 1x3 light kit that takes up less space than a conventional 1x1 panel.

The included mount securely attaches to the rear of the mat via a special high-strength touch fastener. It attaches in seconds and is extremely secure. Like the mat, the mount also folds down allowing it to pack easily into the carrying case.

Power the light via AC or battery. Works universally with 100-240 V.

Related Questions and Answers

Q: 1. Is there a lot more room left in the hard case to put more items in it than just the 2? Would be nice to add an additional hair light or some other items that is always needed.

A: Unfortunately, the hard case is quite limited in space and most likely will not take anything more than a few smaller accessories. For a picture of the interior of the hard case, please see this link: https://bit.ly/352oAYT

Q: 2. Does this kit also come with egg crate grid?

A: Yes.

Q: 3. What is the weight of the package sans the case? I plan on creating a custom case arrangement if the weight is correct.

A: The Intellytech LiteCloth 2.0 LC-160RGBWW Foldable 2 x 2 LED Mat weights 3lbs.

Q: 4. How can these be adopted to RJ45 DMX?

A: No, there are no available mini DMX to RJ45 adapters available.

Q: 5. Is this light silent like the non RGB version?

A: Yes this LiteCloth 2.0 is a silent unit.

Q: 6. Does the ballast on this make any fan noise?

A: The Intellytech LiteCloth 2.0 LC-160 Foldable 2 x 2 LED Mat Kit (V-Mount) uses a passive silent cooling system. There is no fan noise.

Q: 7. Can I activate only 2, and make it a 1x2?

A: No, Intellytech LiteCloth 2.0 LC-160 Foldable 2 x 2 LED Mat Kit (Gold Mount) can not be set to be a 1x2.

Q: 8. Can I use a Bebob 14.4V 200Wh or 240Wh battery? Any limitations?

A: The Intellytech LiteCloth 2.0 Boosted 160W LC-120 Foldable 1x3 LED Mat Kit (V-Mount) can work with either of the batteries found here: https://bhpho.to/3Y4LAmm.

Q: 9. Can they be rotated once attached to a stand?

A: Yes the double ball stand mount included with each Intellytech LiteCloth 2.0 LC-120 would allow for rotation once mounted on the light stand.

Q: 10. What is the difference between the gold mount and the V mount on the Intellytech Litecloth? I bought the gold mount version without noticing there were 2 versions.

A: No. Same light just different battery mounting systems.