System integrators looking for flush-mount speakers should check out the black Bose Professional FreeSpace 3 Satellites, a pair of high-performance, extended-range loudspeakers that are designed for small to medium-sized installed applications such as retail stores, restaurants, bars, lobbies, and conference rooms.

The FreeSpace 3 Satellites provide high-fidelity and extended bandwidth reproduction of voice and music. When paired with the separately sold Acoustimass bass module, the FreeSpace 3 forms a full-range system and allows for a modular deployment with 2 or 4 satellites being used per subwoofer. Mix and match with surface-mount speakers to work with your room's decors and layouts.

2.5" Full-Range High-Performance Driver    Extended Frequency Range    For Small- to Medium-Sized Rooms    Part of FreeSpace 3 System    Works with Acoustimass Bass Module    Compatible with Surface-Mount Satellites

• Pair of satellite flush-mount speakers
• High-fidelity and extended-bandwidth reproduction of voice and music for a wide range of installed applications
• Modular design
• Mix and match surface-mount and flush-mount components to work with different room decors and layouts for a variety of applications
• Selectable 70/100V or low impedance with transformer tap adjustment on separately available Acoustimass bass module

Related Questions and Answers

Q: 1. How does these speakers amps stay cool for heavy DJ use such as a wedding reception?

A: No worries! Convection cooling is common for powered speakers in this class. It is also known as passive cooling. There are no fans.

Q: 2. Any amplifier recommendations for these narrow pendant speakers?

A: The JBL CSA 280Z Audio Amplifier (2 x 80W) B&H # JBCSA280Z would be a great choice, if you were using two of the JBL 67HC/T Narrow Coverage Pendant speakers at 8 ohms. If you are planning on installing several of the speakers, you can use the 70 volt transformers and tap them up to 60 watts each. In this case, the amp you require would be based on the total wattage needed when you add up the wattage of each speaker in your 70 volt system.

Q: 3. what is the suitable amplifier for 4 Speakers 62P ?

A: That depends on your setup. If you are putting 2 speakers to a channel, on a 2 channel amp, then I would recommend this Samson amp- https://www.bhphotovideo.com/c/product/396457-REG/Samson_SA300_SERVO_300_Power.html. If you have another setup in mind, I would recommend giving our Audio Specialists a call at 800-606-6969.

Q: 4. is it 16 Ohms per pair or per one ?

A: It is 16 ohms per speaker.

Q: 5. Could the F1 with or without the sub be a replacement gear for bass amp and cab (2X10) as a kit for a bass player...?

A: The F1 is an excellent loudspeaker, but it would not be my choice product to use for a Bass rig. The F1 alone will lack the extended low frequencies you would need as a bass player. Using the sub in this case is recommended if you want to use the F1 to replace a traditional bass head and bass stack.

Q: 6. Hi, can I connect tonematch to the F1? Thanks

A: Thanks for your question, Jun. For the best assistance, we encourage you to reach out to our Bose Professional team https://bose.life/2RmzQHn. They'll be happy to answer any questions you may have. Take care! Ashley - Bose Support

Q: 7. Can I use the speakers without any sound bar?

A: The Bose Wireless Surround Speakers (Bose Black, Pair) BH #BOSSASTB can not work alone. They are to be paired with select Bose Soundabrs.

Q: 8. I am just using a bookshelf Samsung Stereo that came with 4 ohm speakers/ 80W per channel. Is there a way to wire these that bypasses the internal transformer, basically making them work the Freespace 51's (which I can't find)?

A: Yes, The Bose Freespace 360P Series II Environmental Loudspeaker can operate at 4 ohms and can handle 80W of power. If you use the black common wire as negative and the orange 80W wire as positive, you will be using the speaker at full power and bypassing its internal transformer. The Freespace 360Ps and Freespace 51s cannot be daisy chained together but they can be wired directly to your stereo receiver or power amplifier.

Q: 9. I have 2 panaray 12's. Can these be plugged into any power amp? I am currently using a mackie 808s FR series. 600 watt. Would they work? Smokehousegamblers @ gmail . Com

A: They ill connect to a power amp via their: Connectors 2 x NL4 Neutrik speakON (parallel-wired), input 1 x 2-pin barrier strip, input NOTE: Nominal Impedance 8 Ohms Power Handling 300 W (1200 W peak)

Q: 10. I was at another music store in my area and they had this setup on the floor and the movable array at the bottom would not stay in place it would snap into the rear position on the bottom of both speakers Is there a fix for this I would hate to spend 4500 for a set and they don't lock after moving then around awhile?

A: We have not experienced this issue.