The D-Fi XLR TX Transmitter from CHAUVET DJ allows for standard wired DMX setups to operate wirelessly. The 3.7 x 1 x 1" battery-powered transmitter will give you 11 hours of runtime on a 4-hour charge, and it provides instant wireless communication between similar fixtures at distances up to 165'. The unit plugs directly into a light's XLR port, and convenient LED indicators display the wireless channels in use.

Wireless DMX Transmission    LED Indicators Show Wireless Channels    Battery Powered, 11-Hour Runtime    165' Wireless Range

• Battery-powered wireless D-Fi transmitter provides instant wireless communication
• Plugs directly into your device's XLR port
• Transmits DMX and master/slave signals between similar fixtures
• LED indicators visually show wireless channel operation
• Works without the need for an external power supply
• Fully FCC/RTTE compliant

Related Questions and Answers

Q: 1. How many transmitters can a receiver handle?

A: You would use the receiver with one light and hold the CHAUVET DJ D-Fi Hub BH #CHDFIHUB • would transmit to it. You could either daisy chain between additional lights or use a receiver on other lights to add them to the system. You can sync an unlimited amount of Receivers to one Transmitter.

Q: 2. Does this allow and recognize MIDI input for triggering scenes?

A: Yes, this controller does allow and recognize MIDI.

Q: 3. I'm considering buying the Chauvet Freedom Par Tri 6 lights. I already have a chauvet 10 DMX controller. If I buy this unit (D-Fi Hub), would i essentially be able to run from my chauvet 10 controller into this hub, then control the Par Tri 6 lights wirelessly via the signal coming from the hub? (or am i not understanding this product properly)

A: The way this works is one of two ways. It can be connected to any DMX controller and transmit to D-Fi-compatible lights.It can be connected to any DMX lights and receive from a D-Fi-compatible controller.You can control the Chauvet Freedom Par Tri 6 lights with this D-Fi Hub, a href= http://bhpho.to/1sZmKfI target= _blank http://bhpho.to/1sZmKfI./a

Q: 4. Does this work with the American DJ MEGA BAR 50RGB

A: The CHAUVET DJ Obey 6 Compact Controller can work with the American DJ MEGA BAR 50RGB. But the light uses up to 7 channels. So you might not get every feature out of the light depending on how you set it up.

Q: 5. This works with Elation E-Fly system??

A: The Wireless D-Fi XLR Receiver is not compatible with the Elation E-Fly System.

Q: 6. Will this work with Aputure lights like the 600x? If not, what would be a better choice?

A: Yes, the Oben 40 DMX controller can dim and control the color on lights like the Aputure LS600X.

Q: 7. Can this be continuously powered via usb or do you have to run it off the internal battery?

A: Chauvet says to avoid letting the battery go below 10 percent. If the battery is completely depleted and you plug it in the device cannot be turned on right away. Let it charge a few minutes before turning it on. The battery also should not be charged for more than 24 hours. The short answer is yes you can run it while charging via USB but don't have it plugged in continuously all day.

Q: 8. What transmitters work with this receiver?

A: BH #CHDFIXLRTX is the transmitter for BH #CHDFIXLRRX.

Q: 9. Is is 8 Bit or 16 Bit ?

A: The Obey 40 is 8 bit control.

Q: 10. does it come with power adapter?

A: Yes, the CHAUVET DJ Obey 40 DMX Controller does include a power adapter.