The CRS-PlugNView-H Active Optical Armored 4K HDMI Cable from Kramer is a high-speed HDMI active optical cable (AOC) designed with heavy-duty durability perfectly suited for the harshest use and abuse expected from rental and road applications. The 197' cable supports resolutions up to 4K @ 60 Hz (4:4:4) and 18Gbps without the need for an external power supply or additional extenders.

High Resolution Over Long Range    Extremely Durable    Comprehensive HDMI Support    High Data Transfer Rate    Low Smoke & Halogen Free

Active cable supports resolutions up to 4K @ 60 Hz (4:4:4) over long cable runs

Powers the active units via the HDMI connector with a power consumption of only 0.25W:50mA @ 5V

Integrated, stainless steel, corrugated tube with Kevlar reinforcement protects the internal optical fibers. A TPU jacket, heavy-duty connectors, and robust waterproof & impact resistant connector covers ensure high pulling strength and compression load. Dispensed from a solid, mobile plastic spool

HDCP 2.2, HDR10, HLG, Dolby Vision, Deep Color, x.v.Color, 5.1/7.1 lossless Dolby TrueHD, DTS-HD Master Audio, EDID and CEC

Related Questions and Answers

Q: 1. Hello... Does it work with Blackmagic Design Decklink 8K Pro.

A: The Blackmagic Design Decklink HDMI 2.0 & Optical Fiber Mezzanine Card for Decklink 4K Extreme 12G is meant to be installed as a component for the Decklink 4K Extreme 12G Main Board.

Q: 2. So is this card HDMI 2.0 not the same card as the one bundled with the latest DeckLink 4K Extreme 12G listed as HDMI 2.0b?

A: Yes, The Blackmagic Design Decklink HDMI 2.0 & Optical Fiber Mezzanine Card for Blackmagic Design is the card included with the DeckLink 4K Extreme 12G Capture & Playback Card bundle.

Q: 3. What are the low light numbers?

A: Panasonic does not state this camera's native ISO. However, according to the camera's manual in the overview section, you will be able to adjust the black balance. Here are some other facts that will affect its low-light performance: 1-Chip 1/2.5" MOS Sensor Maximum Aperture: f/1.8 to 4 Pg. 45: https://www.bhphotovideo.com/lit_files/633196.pdf

Q: 4. Hi, does the switcher allow pass through of lossless audio and is it compatible with atmos, dts-x, dolby vision? also, is the 4k @60hz 4:4:4 for resolution of 3840 x 2160 pixels or 4096 x 2160 pixels? thanks much,George

A: It our understanding that all signals, audio and video, go through. Here is the information that Kramer provides. https://bit.ly/2s4Z3dT

Q: 5. Does this camera have a embedded microphone for capturing audio?

A: Most any PTZ camera like the PTZOptics Move 4K do not have built in microphones. However, they do offer microphone inputs where you can connect a microphone or house sound when using an Audio Mixer. Audio input: 1 x 1/8" / 3.5 mm TRS Stereo Line Input

Q: 6. Does it do SRT?

A: Yes, the Panasonic AW-UE100 supports SRT.

Q: 7. Are these cameras fully compatible with a Marshall Electronics VS-PTC-IP IP PTZ controller?

A: Not this model, but the Marshall Electronics VS-PTC-IP IP PTZ controller is compatible with these Panasonic, Panasonic WV-ASF950W Panasonic WV-ASFE951W Panasonic WV-ASM200 Panasonic WV-ASM300W Panasonic WV-XAE100W

Q: 8. Will this also work with a deckling 8k pro?

A: No, System will only run off a Decklink 4K Extreme 12G unit only.

Q: 9. Does it supports all video format of Sony A7S3?

A: Yes, the SmallRig 2957 Ultra-Slim HDMI Cable (21.6") would be fully compatible for use with the Sony a7S III Mirrorless Camera; as such, it would support all video formats offered by the camera.

Q: 10. Does this cable support 4k 60fps? The description mentions support for a 60hz refresh rate, but not 60fps in 4k.

A: Based on the specs, it does. In the overview, it says "supports resolutions up to 4K UHD @ 60 Hz."