Working in conjunction with a separately available receiver, or within an established video network, the KanexPro NetworkAV H.264 HDMI over IP Transmitter can transmit HD video signals over Ethernet for display on a monitor, television, or projector. Using a H.264 compression, Full HD resolution can be maintained without bogging down the network. Since the video is transmitted over IP, standard networking equipment can be used to distribute video. The ability to distribute video from a single source to many displays through an Ethernet switch is great for digital signage and event-space coverage. Multimedia applications can serve video from a selection of sources to a single display using the simple front-panel interface. Other advantages of Ethernet are long cable runs up to 394', power delivery using PoE, and bidirectional IR and RS-232 control.

Note: Separately available power supply required if PoE is not provided by the network.

H.264 HDMI Transmitter & Receiver Set    Accepts Power over Ethernet (PoE)    Transmits 1080p Video up to 394'    Supports RS-232 & IR Control, LPCM Audio    H.264 Compression, HDCP Compliant    Front-Panel Channel Display Screen    Use with Existing Network Hardware    Uses PoE or Optional 5V Power Supply

Incorporating DTVGameControl allows you to manage and control DirecTV, Dish Network, cable receivers, video tilers, and video walls. DTVGameControl features "Game Day" tabs to detail current sporting events for quick access to the latest game. Through DTVGameControl, televisions will automatically turn on each device at a scheduled time on the desired set channel.

Decode and extend 1080p resolutions up to 394'

Features real-time AV decoding to broadcast 1080p

H.264 Compression technology

Can be used with DVI connection (requires separately available adapter)

Supports one-to-many, many-to-many, and point-to-point broadcasting

No external power source needed when connecting through a PoE network switch

Supports LPCM audio format

Smart IP Address Setting: Dynamic Host Configuration Protocol (DHCP)

Wide-band IR pass through to control the source (38 kHz to 56 kHz)

Bi-directional UART/RS232 (Up to 115200)

Supports one-to-one, one-to-many, many-to-one, and many-to-many modes, with large cascading

Related Questions and Answers

Q: 1. Can I have two receivers receiving from the same transmitter?

A: Up to three additional separately sold transmitters can be paired with the receiver. But only one receiver may be used in a system.

Q: 2. I have two HDMI video cameras. I want to run them through a Roland V1-HD video mixer. I also plan on using to HDMI inputs from two laptop computers. Will this extender work for the two HDMI cameras? and will that affect the computer HDMI signal?

A: I would add that, although I haven't experienced any latency, I have noticed that there is some line skipping occasionally during fast moving content. I've only seen this once or twice but for that reason I wouldn't recommend using it in a professional multi-cam situation.

Q: 3. can it be connected to my actual cat 5 network, or i have to cable a dedicated?

A: Everyone's correct, you cant. And the ones that you can, bandwidth is much lower (even Gigibit Ethernet) so there is compression at 1080.

Q: 4. Can two of these systems be used at the same time in the same room? I want to capture video from a remote device to a professional mixer and also send video out of the same mixer to an HDMI splitter.

A: IOGEAR says: I would recommend using the GWHD11 and GWHDKIT11 for this setup. . To better service you and understand your set up, please feel to contact our customer support at 1-866-946-4327 or email us: support@iogear.com. Once again, thank you for choosing IOGEAR.

Q: 5. Does the receiver go to sleep at all?

A: The IOGEAR Wireless HDMI Transmitter and Receiver Kit (BH # IOGWHD11) has a standby mode.

Q: 6. Can I use other brands of PTZ cameras with this, like the PTZOptics Move 4k?

A: While the BZBgear BZBGear Universal Advanced PTZ IP/RS-232/422 Controller with Joystick (3rd Gen) should work. We recommend using the PTZOptics SuperJoy NDI|HX/IP & Serial PTZ Camera Joystick Controller with the PTZOptics 4k Move cameras. We can guarantee that it will support every function of the PTZOptics 4k Move camera. PTZOptics SuperJoy NDI|HX/IP & Serial PTZ Camera Joystick Controller BH #PTSUPERJOYG1 https://bhpho.to/42p1PuP

Q: 7. Does this works after 5 hours of usage?

A: Mine has been on 24/7 and fine since May.

Q: 8. Does this support HDCP?

A: Yes, it is EDID/HDCP transparent. What is connected at the transmiter side is reflected at the receiver side. It is NOT an EDID/HDCP emulator.

Q: 9. do i need two or one?

A: These come in a set. You need one set per video source. (One set for each TV)

Q: 10. Can the receive powered by standard USB? How much A?

A: The mini usb can be used for power. The transmitter requires 1A the receiver 1.5A.