Designed to be used with the T8705 Video Decoder, the 5V PoE Splitter from Axis Communications splits the power and data in an Ethernet cable into two separate cables, which can then be connected to a network device that has no built-in PoE support. This splitter complies with 802.3af PoE and can be powered from any Axis midspan or PoE switch.

For AXIS T8705 Video Decoder    Plug-and-Play Operation    Complies with 802.3af PoE

Related Questions and Answers

Q: 1. Is this a POE+ (at) compatible unit?

A: This is not POE+, this is 24V.

Q: 2. I want to use this power adapter in another device that is not from Sabrent as the specs fit the needs. However not sure if the connector tip is the correct one. May I know if the DC connector dimensions are 3.5mm*1.35mm, or is the 2.5mm*0.7mm type?

A: It is the 2.5mm version not 3.5mm.

Q: 3. Will this splitter reset all outputs when a new devise is attached to the output?

A: I agree with Jan on this. It's not always consistent. I find that if the device is powered (like a gopro) it picks it right up. If it's a mini recorder, or a device that runs off of another units power (thunderbolt from a macbook) it might not pick it up.

Q: 4. by having this splitter how long my HDMI output cable can be?

A: 40 feet is the longest I would go with HDMI to maintain signal quality. I use a 20 ft output cable with this splitter and it works great. However, if it sits for a long time without a signal going through it...it might go on standby and you'll have to reset the unit.

Q: 5. Without a reset button on the PoE injector, how does the remote reset capability work?

A: When you run the Ubiquiti software, Unifi software will be able to find the unit on the network and then reset the Ubiquiti Networks U-POE-af PoE Adapter.

Q: 6. Will This power Cloud Key Plus, UCK-G2-PLUS?

A: The Ubiquiti Networks U-POE-af PoE Adapter BH #UPOEAF will work with the Ubiquiti Networks UniFi Cloud Key Gen2 Plus BH #UBUCKG2PLUS which requires Standard 802.3af PoE

Q: 7. Would this work to power an S5IIx or GH6?

A: Yes, the Panasonic Lumix S5 IIx Mirrorless Camera and the Panasonic Lumix GH6 Mirrorless Camera can be powered with the Hawk-Woods D-Tap 2-Pin Male to USB-C Male 5V Cable (1.3').

Q: 8. Wondering if my application would work. Source: laptop; output to: projector and BMD ATEM Television Studio HD. Does this have a chance of working? Thanks.

A: Yes, it should work.

Q: 9. Will this adapter work with the Bescor dummy battery for the Olympus OM-D EM5iii camera? I have the dummy battery but it requires an 8V input...

A: Yes, the following adapter will work.

Q: 10. Would this unit have 1 IR receiver and 8 IR transmitters? The 1 IR receiver would receive the remote control signal and the 8 IR transmitters would transmit/output the repeated IR signal to each connected video display.

A: Yes, 1 receiver and 8 transmitters.