Mobile DJs and party planners looking for a complete lighting package without the hassles of wires will rejoice over the ColorKey PartyBar GO, a compact, all-in-one battery-powered lighting package well suited for clubs, events, weddings, parties, and more.

The light bar combines two 3 x 3W RGB LED Par lights and two 4 x 3W RGBW Derby-style FX lights to create a dazzling array of light and movement. The integrated 12V rechargeable battery will last up to 5 hours, while the included height-adjustable light stand gets the bar into the air to maximum coverage. Without wires, you are free to move the lighting package anywhere in the room.

The PartyBar Go is simple to operate thanks to the included IR remote control, which allows you to select from a wide range of operational modes including Auto mode, Sound Reactive, and Master/Slave mode. The fixture is also compatible with DMX and boasts three channel modes (3, 6, 15) for use with a DMX lighting console. When the show is over, pack up and easily transport the lightbar with the included carrying bag.

Two 3 x 3W LED RGB Pars    Two 4 x 3W RGBW LED Derby-Style FX Light    25° Par Beam Angle    Auto, Sound Reactive, Master/Slave    0-100% Dimming + Variable Strobe    DMX Channels 5, 6, 15    3-Pin DMX Input / Output    IR Remote Control Included    Includes 7' Adjustable Light Stand    Includes Carrying Bag

• Two 3 x 3W LED RGB Pars each with 21 white LED strobe inlay
• Two 4 x 3W RGBW LED Derby style FX light
• Beam Angle: 25 (pars)
• DMX Channels: 3/6/15
• Auto, Sound Active, and Master /Slave programs
• 0-100% dimming and variable strobe
• 4 push button LED Menu
• 3-pin XLR In/Out
• IEC power In
• IR remote control
• Height adjustable stand
• Carrying bag included

Related Questions and Answers

Q: 1. Umm...what are the dimensions?!

A: The dimensions for the Colorkey StageBar TRI 12 RGB Wash Bar are listed as 39.3 x 2.4 x 2.4".

Q: 2. whats the size of it?

A: This scrim is made to fit the Colorkey LS8 stand, which has a minimum height of 4 feet 5 inches and a maximum height of 7 feet 11 inches.

Q: 3. How durable is this product? Does it produce enough light for macro and for use on a mini cam corder?

A: The Lowel Lowel Go Lite Compact LED Light well constructed and sturdy. Its 54 super bright LEDs.will be perfect for adding light when used on a Mirrorless camera or camcorder.

Q: 4. Willthis work for nikon d300 spec?

A: As far as I can tell it will work with any camera that has a hotshoe.

Q: 5. What is the battery life of a fully charged Numark Mixtream Pro Go?

A: The Numark Mixstream Pro Go Battery-Powered Standalone DJ Controller with Amazon Music has a battery life of about 5-6 hours on a full charge.

Q: 6. I have a maui 5 can it be converted to battery power?

A: No. The LD Systems MAUI 5 Ultra-Portable Column PA System (B&H # LDMAUI5) requires AC power and cannot be converted to battery power. The LD Systems MAUI 5 GO 100 Ultraportable Battery-Powered Column PA System (B&H # LDMAUI5GO) can operate on battery power or AC power.

Q: 7. Can this unit accommodate a Sony HDR-CX405 HD Handycam with a Vello CB-600 Straight Flash Bracket attached? How about this same unit attached to a Canon PowerShot ELPH 180 Digital with the straight bracket.?

A: Yes, The Lowel Go Lite Compact LED Light would work with standard shoe adapters like the Vello 550 or other straight bracket models. Vello 550 link https://bhpho.to/39hOk9e

Q: 8. use a condenser microphone possible? 48V

A: No, the Mackie Thump Go 8" does not provide phantom power, which is required for condenser microphones. You would however be able to connect a condenser microphone if it is being fed through a mixer or phantom power supply such as B&H # XVP1.

Q: 9. Is the flash output adjustable?

A: Yes, the flash output is adjustable. There are 10-step dimming. The Kalvin temperature is not adjustable.

Q: 10. Will this light work with Pentax K5 DSLR?

A: According to Tiffen This light will work with any camera that has a flash shoe mount. It is not an ETTL flash, the camera will make the flash fire but cannot control the light intensity being projected. The user will have to adjust his camera settings to match the flash output manually. This flash also works as a constant light for video applications.