The Morely 20/20 Power Wha Volume Pedal is a combo pedal that provides both a classic wha effect and 20 dB of clean gain. The bright yellow pedal with glow-in-the-dark logos is constructed with durable, gig-ready cold-rolled steel housing and is powered by a single 9V battery or a Morely 9V adapter (both available separately).

The pedal uses Morely's custom MQ2 inductor, which is resistant to EMF and provides a smooth audio taper. An LED lights up to indicate Wah mode and stays off if you're in Volume mode, and the pedal offers silent switching to prevent pops and noise from ruining a performance. If you're an avid volume pedal user who occasionally needs a wha, the Morely 20/20 Power Wha Volume Pedal is a great-sounding solution that saves valuable pedalboard real estate.

Combination Optical Wha and Volume Pedal    +20 dB Clean Gain Boost    20/20 Buffer Circuit Stops Signal Loss    Smooth Audio Volume Taper    Silent Switching to Prevent Pops & Noise    9V Battery or Optional Morley 9V Adapter    Quick-Clip Battery Door    Cold-Rolled Steel Housing    Glow-in-the-Dark Treadle Grip & End Logo

• Switched Wah: Stomp switch switches between wah and volume. You can use wah as a tone filter by leaving the pedal in your desired position. Volume level can be set by leaving the pedal in any desired position. Silent switching prevents switch noise from coming out of amp.
• Wah Boost Knob: Allows you to adjust wah level up to 20 dB

• All Morley 20/20 pedals come equipped with our Buffer Circuit. This circuit prevents volume loss or tone change to the instrument. It also allows the use of long cables or pedals boards with lots of pedals and connection cables.
• Optical design ensures smooth pedal control of wah, volume, and/or switching, that won’t get scratchy and wear out like potentiometer-/pot-controlled pedals.

• 9V: Only Morley's 9VDC 300mA regulated adapter should be used.
• In: Input jack. Plug instrument into this jack using 1/4" guitar cable.
• Out: Connect amplifier to this jack using a 1/4" guitar cable.
• Quick-clip battery door allows easy access to battery compartment.

Related Questions and Answers

Q: 1. Does this provide sufficient output to power a Sound Devices Mixpre 6ii?

A: Yes, this has sufficient output the power the Mixpre 6ii.

Q: 2. Is the weight really 206 gr with this capacity ? this is important for portability

A: Yes, it is.

Q: 3. how wide is the magnet?

A: just over 10cm.

Q: 4. What is the length in cm of the AC Power Adapter?

A: The AC Power adapter is 182 cm

Q: 5. Can I use this to power a Panasonic agac 130 while out in the field ? And how long would it last ?

A: Yes, this power bank could be used to power the Panasonic AG-AC130 when plugged in with the AC adapter included with the camera.As far as runtime, the battery that comes with the camera is 5800mAh. This power bank should be able to charge that battery almost an additional four times.

Q: 6. Is it rechargeable

A: The ATN 1600mAh Extended-Life Battery Pack is rechargeable via the USB cable that comes with the unit.

Q: 7. Is the only difference from the F-30 the sostenuto? Will it work as well for a Kawaii MP11?

A: The is correct. The Kawai F-30 has a sostenuto pedal and the Kawai F-20 does not have a sostenuto pedal. Both can be used with the Kawai MP11.

Q: 8. Can the unit charge while powering devices if plugged into a wall outlet?

A: It would get some charge, but not as full as if it was plugged in with out any devices.

Q: 9. Will this unit power a Sony FX3? If so, any expectations for how long?

A: The Belkin Boost Charge USB Type-C Power Bank (20,000mAh, 30W) should be able to power the Sony FX3. However, it would be difficult to say for how long because it would depend on how you are using the camera and what settings you have the camera in.

Q: 10. How do you know when the battery is fully charged

A: The battery in the ATN Power Weapon Kit (16000mAh, Buttstock Case) has indicator lights to let you know when it is fully charged.