Built to survive tough conditions, this compact Nanuk 910 Waterproof Hard Case, in graphite, comes with custom-cut, high-quality, closed-cell foam to organize, protect, and transport two Sennheiser EW Series ENG or Senal wireless microphone systems.

The case offers compartmentalized protection for a handheld microphone, a plug-on transmitter, two bodypack transmitters, two receivers, batteries, and other accessories.

Primarily designed for search and rescue missions, first responders, military, industrial, marine, and diving professionals, the 910 case features a lightweight yet tough, injection-molded NK-7 resin shell for high shock absorption. The shell resists deformation and fatigue, ensuring a long-lasting, watertight, and dustproof IP67-rated seal.

The case is equipped with an automatic pressure release valve and two stainless-steel reinforced eyelets that can be used to secure padlocks. It is ATA-300 compliant and military approved with an MIL-SPEC certification.

A soft-grip, ergonomic handle makes the case easy and comfortable to transport. Stainless-steel hardware and an integrated handle stay keep the handle out of harm's way when you are traveling or during shipping.

Made in Canada, the case is backed by a limited-lifetime warranty.

Holds 2 Sennheiser ENG or Senal Systems    Custom-Cut Foam Inserts    IP67 Waterproof and Dustproof Seal    Military MIL-SPEC Certified, ATA-300    Durable & Lightweight NK-7 Resin Shell    PowerClaw Latching System    Airline Check-In & Cabin Carry-On: Yes    Limited Lifetime Warranty

• For two Sennheiser EW Series ENG or Senal wireless mic systems
• Color: Black
• IP67 Rating: Waterproof (IPX7), dustproof (IP6X)
• MIL-SPEC certified
• ATA-300 compliant
• Airline Check-In: Yes
• Airline Cabin Carry-On: Yes
• Interior (L x W x H): 13.2 × 9.2 × 4.1”
• Exterior (L x W x H): 14.3 × 11.1 × 4.7”
• Limited lifetime warranty

The proprietary PowerClaw latching system uses compressive force and triple action to clamp your case tight. Integrated slide locks offer added security, preventing your case from opening during transport or if it’s dropped. The super-tough nylon construction and stainless-steel hardware ensure that your important items stay safe in your case.

Impact resistant, lightweight, and armed with an NK-7 resin body, the 910 case is designed with rounded corners, thick, strong walls, and oversized details. These shock-absorbent features prevent damage to the case, and more importantly to your valuable equipment.

Changes in altitude, temperature, humidity, and geographic location create a vacuum lock, which can effectively seal your case shut. The integrated automatic pressure release valve equalizes this atmospheric pressure difference. Using state-of-the-art technology, the micro vent allows air to pass through, while preventing water from entering.

Related Questions and Answers

Q: 1. Is the lid lined with foam?

A: There is no foam in the lid of this case.

Q: 2. will the foam in these cases attract moisture and potentially rust metal e.g. knives?

A: The foam in these cases would not attract moisture, mainly because the case itself is water-proof.

Q: 3. How deep is the 4" section of the hole? Is the lower section exactly 3"? Would a 3.15" lens be able to squeeze in?

A: The pre-cut foam dimensions included with Nanuk 918 6-Lens Case are 6.5 x 9 x 10.5 inches. each lens cavity has 2 removable foam disc to fit long or short lenses. The first session is 2 inches deep. the first foam disc is 1.5'' tall and the second disk towards the bottom of the insert is 2.5 inchees tall. If you remove all foam disk the insert would reach a 6 inche depth. The width of the insert on the top section is 4 inchess, the botton sections is only 3 inches. I wouldnt't recommend this inserts if your lens circumference is winder then the insert because of the pressure you'll be putting on your lenses.

Q: 4. Does the URSA G2 fit in this case?

A: If you are referring to the Ursa Mini 4.6K G2 then we are afraid not. This is for the larger, original Ursa cameras only. For Ursa Mini cameras we recommend BH #SK221312BKU from SKB instead. https://bhpho.to/2V40qX2

Q: 5. Will this case also support the DJI RC Smart Controller with the integrated screen without having to cut any of the foam molding?

A: The Nanuk 909 Waterproof Hard-Shell Case for DJI Mini 3 Pro & RC-N1 Remote will not fit the DJI RC Smart controller.

Q: 6. was looking for luggage with no liner or insert. Thought this was perfect. Can I buy 950 model without foam?

A: We do offer the case alone with no insert which is B&H # NA9500001. Please see the image below for reference.

Q: 7. Can this fir the Sirui Night Walker cine lenses?

A: Yes, the Nanuk 918 Hard Case with Foam Insert for Six Lenses (Black, 20.L) will fit the Sirui Night Walker Cine Lens series. The lens dimensions are 79mm wide, and 85.4mm tall. The lenses inserts on the pre cut foam that comes with the case are 103mm wide by 113mm long.

Q: 8. Does the Nanuk 925 case for the Mavic 3 accommodate the smart controller DJI RC Pro that comes with the Mavic 3 Cine?

A: The Nanuk 925 Waterproof Hard Case for Mavic 3 will only fit the Standard controller.

Q: 9. Where are the interior & exterior dimensions.....? DUH.

A: With foam removed, the interior dimensions of the Nanuk 910 Waterproof Hard Case for Sennheiser ENG and Senal are 13.2 × 9.2 × 4.1”. The exterior dimensions of the case are specified as 14.3 × 11.1 × 4.7”.

Q: 10. What is the height of the two divider inserts?

A: The height of the divider inserts is 8.5".