The BSA Optics 3-9x40 Sweet .350 Legend AO Riflescope combines high-quality optics and rugged construction with accuracy and ease of use. The riflescope offers 3-9x magnification and interchangeable turret rings specifically calibrated for three popular rounds. It features fully coated optics for bright clear views with 1" monotube construction.

Simple 30/30 Duplex Reticle    1" Single-Piece Maintube    1/4 MOA Impact Point Correction    35 MOA Windage/Elevation Adjustment    Interchangeable Turret Rings    Anodized Aluminum Housing    Anti-Reflection Fully Coated Optics    Waterproof, Fogproof & Impact Resistant

• Low 3x power allows you to scan the terrain for long-range targets or for close-range plinking and varmint hunting
• High 9x power allows you to zoom in for longer range identification and accurate shot placement
• Generous 40mm objective ensures views remain bright and clear in even challenging light
• Anti-reflection fully coated optics improve light transmission and present more accurate colors with crisp resolution
• 34.2-foot field of view at 100 yards at 3x, 11.5 feet at 9x

• Simple duplex crosshair reticle has long thick outer posts and thin center hairs that allow precise shot placement at near and far distances
• 1/4 MOA impact point adjustment ensures you can get precisely on target
• 35 MOA windage and elevation adjustment range
• Three interchangeable turret rings, each one is ballistically calibrated for specific cartridges: 150, 170, and 180 gr
• Adjustable objective allows you to set the parallax from 7.5 yards to infinity
• 3" eye relief presents a generous eye box to reduce eye strain
• Wide exit pupil at all magnifications ensure the whole scene remains in view, even in low and challenging light

• 1" maintube diameter
• Lightweight and durable aluminum housing
• Designed and sealed to be water and fogproof
• Includes a set of Weaver rail mount rings
• Screw-on lens caps guard against dirt, dust, debris, and moisture
• Length of 12.2 inches

Related Questions and Answers

Q: 1. Will this gimbal work with a slik 500 dx tripod? Do I need an attachment?

A: Yes, the Oben GH-30 can work on the Slik 500 DX Tripod.

Q: 2. is this compatible with the mini 3 Pro?

A: The DJI RC Plus controller is DJI's enterprise controller, and supports the flagship M300 and new compact M30 drones.

Q: 3. Does the release plate for the Sirui BCH-20 slide in the from the rear, or can it be side mounted? Side mount release plates are super convenient when you have rails and gear attached to the camera.

A: Hi,It can only be mounted from the rear. You cannot open the clamp enough to mount or remove the plate from the side.

Q: 4. What's the largest capacity SSD that's compatible with this remote?

A: The DJI RC Plus Controller for Matrice 30/300 RTK/350 RTK is compatible with microSDXC cards; at the moment, the largest cards of this kind are 1TB, like the SanDisk 1TB Extreme UHS-I microSDXC, B&H # SA1TBBEMSD.

Q: 5. Will this controller work with the DJI Matrice 300? I keep hearing that it does but hear just as much that it does not.

A: The DJI RC Controller Plus is not compatible with the DJI Matrice 300.The Controller plus is compatible with the DJI Matrice 30.

Q: 6. How much does the RC Plus weigh?

A: The DJI RC Controller Plus will weigh 3.13lbs.

Q: 7. Hi, I would like to know if this RC has a built-in microphone in order to record voice directly without any external mic?

A: Yes, the DJI RC Plus Controller for Matrice 30/300 RTK/350 RTK features a built-in mic that can be used to record your voice during without an external mic. Keep in mind this controller is only compatible with the Matrice 30 Series, 300 RTK, and 350 RTK drones.

Q: 8. Will this fit an F8 with 2 dual Sony Rx, bds, and Sony Tx?

A: Answering on set strapped to an orca-30. :) Rocking a SD 633 and 4x sennheiser wires. Think f8 is smaller so should be fine. Love love love the bag!

Q: 9. will this gimbal work for my Nikon D850 and is the mount okay for a 80-400mm lens? Is there a handle available for hand-held shooting if I don't use a tripod in the field?

A: This gimbal will work very well with your setup. A handle is not recommended, too heavy, you must use it on a tripod or possibly a sturdy monopod.

Q: 10. What release plate does this come with, and how do I order extra to avoid the problems noted by commenter? Oben website says this but does not have model info on duplicate plates: "rca-Type Quick Release The Arca-type quick-release plate allows you to quickly mount your camera and lens to the gimbal head. Attach quick-release plates to multiple setups to make swapping cameras and lenses a breeze. The included plate is designed with security pins that prevent it from accidentally slipping off the mounting platform.

A: The Oben QR-20 Quick Release Plate, https://bhpho.to/2fga1qi would be the quick release plate that will fit on the GH-30, and also for a long lens foot, the Oben QR-53 Long Lens Quick Release Plate (5.3") https://bhpho.to/2M3EZF3 . It seems like the Arca type mount on an Oben device is a little big for the universal Arca type, and consequently choosing an Oben quick release plate has a better chance at a tight fit.