Use this Camvate Power Cable with Locking Right-Angle Connector for Atomos/SmallHD 702 monitor or other device that has a 2.5mm locking power connector. The coiled cable allows you the excess cable length to stay neat and out of the way when not needed. Each cable is tested for continuity before shipping.

Right-Angle Power Connectors    One Locking and One Standard Connector    Coiled Cable    Pre-Tested Cable

Related Questions and Answers

Q: 1. Wll this work on an Atem Mini Pro?

A: no it will not

Q: 2. Will this work on the shinobi 7 ?

A: This is the correct locking cable that connects to the Shinobi battery eliminator. It is a locking cable. Atomos D-Tap to DC Barrel Coiled Cable BH #ATOMDTPCB2 • MFR #ATOMDTPCB2 https://www.bhphotovideo.com/c/product/1493127-REG/atomos_atomdtpcb2_d_tap_to_dc_barrel.html?sts=pi&pim=Y

Q: 3. Will this work with the amaran cob 60x? 5.5 vs 2.5 confuses me.

A: No, The Kondor cable will not work. Please use the following Dtap cable BH #AP0152A30 https://bhpho.to/3zfCfuG

Q: 4. I need to power a BH#LESMV19Q, using BH#LEBESM with my Sound Devices 833 SL-2 DC Hirose 4-pin output. Would this cable work?

A: No, the CAMVATE C2725 DC 2.5mm to 4-Pin Male Right-Angle Power Cable for Sound Devices and Zoom Field Recorders is not compatible for use with the Lectrosonics SMBATELIM Battery Eliminator for SM Transmitters (B&H # LEBESM), which requires a locking DC barrel connector. Instead, you can use the Deity Microphones SPD-HR25 4-Pin Hirose to 2.5mm Locking DC Barrel Jack Cable (B&H # DESPDHR25).

Q: 5. Can this work with the Blackmagic Video Assist if used with a 12V Dtap Output?

A: Not that we are aware of.

Q: 6. Hi. Is the "micro side" Lshape of the cable long enought to reach all the way through a smallrig hdmi clamp mounted on a cage? Is there a non L shaped version?

A: You might want to go with a standard micro HDMI to HDMI. We have a variety of micro HDMI to HDMI that should work for you.

Q: 7. Will this carry a 4k signal to the shogun from a sony a7s?

A: yes

Q: 8. Will this work with the Ninja V?

A: Not that we are aware of. The only D-Tap options we know of for the Ninja V have a Sony NP-F style dummy battery, such as BH #SMDTSLFB. https://bhpho.to/2VkOWR3

Q: 9. chances of destroying this BH #BLVIDA125HRD MFR #HYPERD/AVIDA12/5HDR with that cable? or better to use regulated 12v to dtap? hm

A: The CAMVATE Straight D-Tap to Locking DC 2.5mm Right-Angle Cable (Black, 18.9") is fine to use with the Blackmagic Design Video Assist 5" 12G-SDI/HDMI HDR Recording Monitor and the chances are low.

Q: 10. Are they the new cable with indicator lights and reverse polarity?

A: No, the Kondor Blue Coiled D-Tap to Locking DC 2.5mm Right-Angle Cable (16 to 50") does not list indicator lights and notification of reverse polarity. Consider instead the Kondor Blue Straight D-Tap to DC 2.5mm Right-Angle Cable (15") or a smart D-Tap connector. See the link below: https://bhpho.to/3PSNB1w