The CAMVATE DC 2.5mm to 4-Pin Male Right-Angle Power Cable lets you securely connect your compatible field recorder to a DC power supply for uninterrupted operation on location. This 12.6" coiled cable features high-quality construction and right-angle connectors—a DC 2.5mm barrel on one end and a Hirose 4-pin male plug on the other, allowing use with Sound Devices 688, 644, and 788T models, and Zoom F4 and F8n units. The cable is tested for continuity to ensure reliability out of the package.

Connects Field Recorder to DC Power    For Sound Devices 688, 644, and 788T    For Zoom F4 and F8n    High-Quality Construction    Continuity Tested    DC 2.5mm Barrel Connector    Hirose 4-Pin Male Plug    Right-Angle Connectors    Coiled Cable

Related Questions and Answers

Q: 1. Is this compatible with the 7 series Sound Devices recorders?

A: Yes, it is. I use it with my SD552, and I've seen reviews from folks who use it with their SD663 and their SD788T. Bill

Q: 2. Will this work with pix 240

A: Yes, this is also the correct power supply for the PIX-240

Q: 3. will this work with a cell phone?

A: It depends what it is being used for, but TRRS is usually for a cell phone

Q: 4. Is it possible to use with zoom F6? and also, when using zoom F8, does the sound record to the Internal SD card?

A: When using the Viviana Cloud Wireless File Backup Solution with the Zoom F8 Multitrack Field Recorder, the audio will also be recorded on the SD card inside of the F8, as well as to DropBox over Wi-Fi or a mobile hot spot. According to Viviana, the Cloud will also work with the Zoom F6 Multitrack Field Recorder.

Q: 5. Is this compatible with the sound device 664 & 688.

A: Hello, yes the XL-WPH3 is compatible with the 633, 688 as well as the 633 recorder. It works with any Sound Devices product that uses a four pin Hirose connector for power. Thank you

Q: 6. I need to power a BH#LESMV19Q, using BH#LEBESM with my Sound Devices 833 SL-2 DC Hirose 4-pin output. Would this cable work?

A: No, the CAMVATE C2725 DC 2.5mm to 4-Pin Male Right-Angle Power Cable for Sound Devices and Zoom Field Recorders is not compatible for use with the Lectrosonics SMBATELIM Battery Eliminator for SM Transmitters (B&H # LEBESM), which requires a locking DC barrel connector. Instead, you can use the Deity Microphones SPD-HR25 4-Pin Hirose to 2.5mm Locking DC Barrel Jack Cable (B&H # DESPDHR25).

Q: 7. Can I use this cable to jam the time code from my Zoom F6 to my Komodo?

A: Yes you can.

Q: 8. Does this cord work with rode video mic pro+? I lost mine.

A: If connecting your Video Mic Pro+ to a camera you need this: https://www.bhphotovideo.com/c/product/1409621-REG/rode_sc2_3_5mm_trs_patch_cable.html?sts=pi-ps&pim=Y If using with a smartphone then it's this: https://www.bhphotovideo.com/c/product/1048152-REG/rode_sc7_trrs_iphone_cable_for.html

Q: 9. Work with rode videomicro to camera or phone?

A: No, the SC10 cable is not compatible with the VideoMicro which has a standard 3.5mm TRS output. The SC10 will work with the VideoMic NTG. For the VideoMicro, you can use the Rode SC7 (B&H # ROSC7) which has a standard 3.5mm TRS connector on one side and connects to the mic's output and a 3.5mm TRRS connector on the other side to connect to a smartphone. The cable that comes with the VideoMicro is the SC2 (B&H # ROSC2) and it has standard 3.5mm TRS connectors on both ends, This is the cable to use for connecting the VideoMicro to cameras and recorders.

Q: 10. chances of destroying this BH #BLVIDA125HRD MFR #HYPERD/AVIDA12/5HDR with that cable? or better to use regulated 12v to dtap? hm

A: The CAMVATE Straight D-Tap to Locking DC 2.5mm Right-Angle Cable (Black, 18.9") is fine to use with the Blackmagic Design Video Assist 5" 12G-SDI/HDMI HDR Recording Monitor and the chances are low.