Mount your camera securely with the WM-11 Wall Mount from Datavideo, an extremely durable wall mount designed for compatibility with the PTR-10 and PTR-10T series robotic pan tilt heads. This wall mount can be mounted either horizontally or upside-down in a vertical configuration to meet your needs, and the durable aluminum and 3mm thick carbon steel plating ensure reliable, long-lasting performance, with a maximum load capacity of 110.2 lb.

The WM-11 features three bubble level meters for accurate positioning and strong metal expansion bolts that mount the system securely to any wall. These features help the WM-11 mount retain absolute stability during the most demanding usage scenarios.

Wall Mount for Robotic Pan Tilt Head    Fits PTR-10/PTR-10T Series Heads    Max Load of 110.2 lb    Mounted Horizontally or Vertically    Three Bubble Level Meters    Strong Metal Expansion Bolts    Durable Aluminum & Carbon Steel Plate

Related Questions and Answers

Q: 1. Does this work with any PL-Lense or is there a list with compatible lenses?

A: The Vocas Sony E-Mount to PL-Mount Adapter MK II with 15mm Support is compatible with all full frame PL mount lenses.

Q: 2. Is this compatible with LANC for the Sony PXW-Z90?

A: Datavideo does not list the Z90v as being compatible for LANC controller. The camera does have LANC, but they do not list it.

Q: 3. Does this have any ptaps on the other side?

A: This has two p-tap connections.

Q: 4. Is there a LANC cable included, or can someone list a product number?

A: The Datavideo PTR-10 MK II Robotic Pan Tilt Head (DVIP) comes with a lanc adapter cable that connects to the camera. It is listed as - 2.5mm Mini Jack to 8-Pin Mini Din Cable (Remote)

Q: 5. Does this support Visca over IP or only serial ?

A: The Datavideo PTR-10 MK II Robotic Pan Tilta Head (DVIP) will support "pan and tilt operations via VISCA, DVIP, RS-422, or an included IR remote control", "(Control Unit via IP, IR Remote, or VISCA)".

Q: 6. Does this work for Gold mount plus batteries? Like the Anton Bauer 26V batteries?

A: No, unit will only provide 12-16 Volts

Q: 7. Can this be controlled with an iPhone?

A: No, the PTR-10 MARK II can be controlled by the included IR controller, VISCA protocol controller, Datavideo RMC-180 Camera controller, RMC-300A Universal Remote-Control Panel, and compatible with DVIP over Ethernet and other integration solutions such as Crestron.

Q: 8. I have a PTR-10T Mk II, but am missing the 12V 5A power adapter. How can I purchase one?

A: While the manufacturer does not provide the adapter for sale separately, there are two ways to power the Datavideo PTR-10T Mark II Robotic Pan and Tilt Head (HDBaseT) (B&H# DAPTR10TMKII). The unit will accept a 12VDC barrel input of 3A, although 5A will be needed if power will be drawn from the D-Tap port on the head for the purpose of powering a camera. You may wish to contact the manufacturer regarding their preferred model of adapter: sales@datavideo.com Alternatively, the head will accept Power Over Ethernet (PoE) with the power being fed through the LAN port by a source of PoE such as the TP-Link TL-POE170S PoE++ Injector (Black) (B&H# TPTLPOE170S): https://bhpho.to/3POMj5c

Q: 9. Is there a motorized slider this unit is compatible with?

A: Not at this time.

Q: 10. Can this PTZ head zoom following sony camcorders: - Sony HXR-NX5U - Sony HDR-FX1000

A: Yes, Both the SONY HDR-FX1000 and the NX5U support lanc control and would be supported on the Datavideo PTR-10 PTZ head. Page 20 has all the tested cameras listed. https://bit.ly/3BsM76D