The matte gray MK 2S Microphone Capsule from Schoeps comes as a matched pair, and exhibits a slight high-frequency emphasis for frontal sound incidence, with only a slight rolloff of high frequencies off axis and in the reverberant sound field. This frequency response characteristic falls between that of the MK 2 and the MK 3 capsules, making this capsule suitable for a wide range of applications.

This capsule has proven particularly useful in 2- and 3-microphone stereo arrays, where its placement near the reverberation radius of the sound field presents a sonically balanced pickup favored by many recording engineers.

Comes in a pack of 2

Omnidirectional pattern

Slight high-frequency rise to compensate for losses at moderate recording distances

For a very wide range of recording applications

Suitable for spaced microphone stereo pickup and Decca Tree arrangements

Related Questions and Answers

Q: 1. What is a good schock mount/suspension holder to fit this microphone? I realize this mic is predominantly used indoors, but if I am in a situation where I need to use it outside, what product to reduce wind effect will fit this mic?

A: I have a Rycote Blimp with a lyre mount for bad windy conditions and the usual dead kittens for general breezes. But you said it yourself, this is an indoor mic. Moreover, it is a short mic so not so great at a distance of more than a few feet unless you have an amplified audio target. If you have critical audio needs outdoors, your better bet is to rent a good shotgun mic or buy something like the Sennheiser 416, Sanken Cs3, or Schoeps CMIT if you want to go all in. I have used the CMC6 outdoors (without needing a blimp). If you can get in close, it's OK but at say four or five feet, I don't know that the 'Schoeps' difference is any longer in effect. These weren't scientific shootouts and audio environments vary but I suspect plain old microphone physics trump German engineering at a certain distance.

Q: 2. Can the capsules be interchanged for omnis? Confusing because the Sound on Sound review said they are fixed but I see omni caps in your inventory.

A: Yes, you can use the sE8 Omni Microphone Capsules - Matched Pair (B&H # SE8OMNICAPPR) in place of the cardioid capsules that come with sE8 microphones.

Q: 3. What is the size and weight of this microphone?

A: As per the Manufacturer: CCM 41 LG Length: 46 mm Diameter: 20 mm Weight: 45 g

Q: 4. What are the differences between cmc1 and cmc1u? tks.

A: The "CMC 1 U" is the part identifier for the amplifier portion of the Schoeps CMC 1 (the body of the microphone), without any capsule. The Schoeps CMC 1 Microphone Amp, MK 41 Supercardioid Condenser Capsule, and Cinela Windshield (Matte Gray) includes the amplifier, the MK 41 capsule, and a windshield.

Q: 5. What are the differences between cmc1 and cmc1u? tkx.

A: Schoeps CMC 1 U has an XLR connector and Schoeps CMC 1 L has a Lemo connector.

Q: 6. So are these specifically for the Mixerface recorders? I wanted to get these for my Zoom F3 because they would be perfect for it, but I'm seeing other people saying they're proprietary.

A: The CEntrance PivotMic PM1 XY Stereo Condenser Recording Microphone will perform best when used with the CEntrance Mixerface. Presumably these could be used with other recorders such as the Zoom F3, however as others mention, the orientation of the XLR connections may present an issue when attempting to orient the capsules in a specific stereo pattern.

Q: 7. Can these also accept capsules from SKM-185? In other words; are they interchangeable?

A: No. These are fixed capsules. The KM 100 series has interchangeable capsules.

Q: 8. Hey sound guys and cam ops, what if i put this on my camera top? for run and gun documentary filming? Will there be difference?

A: The Schoeps MiniCMIT is a high-quality short shotgun microphone that can be camera-mounted and used for run-and-gun documentary filming with excellent results.

Q: 9. Since the MiniCMIT lacks built-in filters, can anyone comment about this mic paired with the low cut filter in the Rycote Nano Windshield system?

A: The Schoeps MiniCMIT Short Shotgun Microphone is compatible for use with the Rycote Nano Shield Windshield Kit NS2-CA for Microphones up to 6.1" Long (B&H # RYWKNS2CA264). The low-cut filter on the Nano Windshield should work effectively since it will function in line with the microphone.

Q: 10. Hello! With this microphone amplifier, will I still need phantom power to connect a condenser microphone to a camera like the Sony A7SIII, or a recorder like the Atomos Ninja V? If so, what do you recommend?

A: This amplifier is designed to work with the Shoeps MK series capsules, and will still require phantom power to run.