Lightweight, portable, stable, and suitable for DSLRs, mirrorless, and compact digital cine cameras weighing up to 13.23 lb, the Sirui 75mm Bowl Aluminum Tripod with BCH10 Video Head can be used on a variety of surfaces to create a level platform for creating cinematic pans and tilts. The system includes a lightweight 2-stage aluminum tripod with a 75mm bowl and a compact fluid head. An integrated mid-level spreader allows you to shoot on uneven terrain.

The fluid head features a sliding balance plate that enables you to mount and balance a variety of rig configurations, and as the top of the head is indexed, you can easily reset your camera's position when changing your setup. The tripod features spiked feet with spin-down rubber feet, so you can easily transition from exterior to interior shooting. Integrated leg buckles secure the legs for safer transport. A padded, zippered, soft carry case completes the system.

2-Stage Aluminum Tripod, 75mm Bowl Base    Compact Fluid Head with 13.2 lb Payload    24.8 to 55.1" Height Range    360° Pan Rotation, Independent Pan Lock    -60 to 90° Tilt Adjustment    Camera Plate with Safety Catch    Built-In Mid-Level Spreader    Retractable Rubber Feet with Spiked Feet    Rotating Lever Locks

• 2-stage aluminum tripod with a 75mm bowl base
• Fluid head with a 3.2 lb payload
• 360° pan rotation with an independent pan lock
• -60 to 90° tilt adjustment
• Pan handle included
• Camera plate with safety catch
• Built-in mid-level spreader
• Foot spikes with spin-down rubber boots
• Integrated leg buckles for more secure transport and storage

Related Questions and Answers

Q: 1. Does this tripod come with a with Benro 75HB 75mm Half Ball Adapter?

A: No, the Benro C373T Carbon Fiber Video Tripod (75mm Bowl) does not include the Benro 75HB 75mm Half Ball Adapter.

Q: 2. Will this tripod work with a Miller CX8 or a Sachtler FSB8? Please advise

A: Yes, both the Miller CX8 and the Sachtler FSB8 head will work with the Benro A673TM tripod. The tripod will support 75mm bowl heads, which both heads that you listed have.

Q: 3. Will the Manfrotto 608 Nitrotech fit on this tripod?

A: You will just need a 75mm half ball adapter to use that head on this tripod. https://bhpho.to/31OOD4c

Q: 4. What's the length of this when folded down to minimum?

A: The Benro C673TM Carbon Fiber tripod has a Closed Length of 28" / 71.1 cm

Q: 5. which tripod dolly would work with this model of tripod?

A: This tripod is compatible with the Benro DL-08 Tripod Dolly, B&H # BEDL08. https://bhpho.to/2iwra3p

Q: 6. Do the legs come out on their own (gravity) or dos the user have to open them manually (pull legs out)? Also, how good and easy are these twist locks? I prefer the clamp style, I fear these will take to long to adjust.

A: No current tripod should have legs that freely move; not only is it awkward, it can be dangerous to your fingers. This tripod has legs that stay in place and you need to move them. Twist or clamp; that is the external question. In the end it is a matter of personal preference. I find that pros tend to go with the twist. Today's twist locks are very quick, usually 1/2 turn or so and are not significantly slower than clamp locks. I also find that clamp levers get caught on every strap within a 10' radius. Miller is one of the high quality brands so you will find working with any of their products a pleasure.

Q: 7. Would this be compatible with the Manfrotto MVH502A Fluid Head?

A: Yes it will be. The Manfrotto 502A Pro Video Head has a 75mm Half Ball which will allow it to properly connect to this tripod. https://bhpho.to/2I01KIJ

Q: 8. Is this compatible with the Benro DL10 heavy duty dolly?

A: Yes, Benro A673TM Aluminum Tandem-Leg Video Tripod is compatible with the Benro DL10 Dolly. Benro DL10 Heavy-Duty Tripod Dolly BH #BEDL10 • MFR #DL10 https://bhpho.to/3vfWqqA

Q: 9. will this tripod handle the Glidecam crane 200?

A: Yes, this tripod will have no issue handling the Crane 200. You will need a Benro 75mm Half Ball Adapter B&H # BEBL75S in order to attach the Crane 200 to the A673TM.

Q: 10. can i screw and manfrotto 502 head on this?

A: If the head comes with 75mm half-ball, then yes you can. Otherwise you would need a 75mm half ball. I'm using Manfrotto 520 and it works fine with a bit of greasing.