As the company's premium line of instrument cable for electric guitar, the 12' Monster Cable Prolink Rock Instrument Cable incorporates carefully designed construction to offer enhanced bite, clarity, and character for discerning players and tone aficionados. It boasts custom Monster 1/4" TS connectors (both straight) with 24kt gold contacts, and it features Time Correct multigauge wire networks protected by MicroFiber, PEX, and carbon-infused dielectrics. Additionally, there is 95% copper braided shielding, collet strain relief, and a Duraflex jacket. The result is a top-shelf cable that yields minimal handling noise and magnetic interference while maintaining proper high-frequency performance and harmonics to improve the tone of your rig.

Premium Cable for Electric Guitar    Custom Monster 1/4" TS Male Connectors    24kt Gold Contacts    Minimal Handling Noise    Enhanced Bite and Character    Time Correct Multigauge Wire Networks    Collet Strain Relief    Carbon-Infused Polymer Covering    95% Copper Braided Shielding    Lifetime Cable Warranty

Monster Rock pro audio cable's advanced coaxial design preserves fast transients, clean highs, and vivid harmonics.

Patented multiple-gauge wire networks enhance your guitar's sonic bite, maximizing your guitar's tone and helping it through the mix.

A dense shield rejects interference and hum, and heavy-duty 24kt gold connectors increase conductivity and resist corrosion.

Monster set the standard with the Original Lifetime Cable Warranty. Your Monster Rock pro-audio instrument cable is covered by their 100% replacement guarantee, so you'll be a Monster for life.

• Multiple gauge high- and low-frequency wire networks for cleaner highs, vivid harmonics, and fast transients
• Time Correct windings for precise sound reproduction
• Custom Monster connectors with 24kt gold contacts
• Durable connector design featuring collet strain relief
• Duraflex protective jacket
• Carbon-infused polymer covering minimizes handling noise
• Solid-core center conductor
• 95% copper braided shield minimizes interference and hum
• MicroFiber dielectric provides isolation of magnetic fields
• Lifetime cable warranty

Related Questions and Answers

Q: 1. will this work in the angelbird cfast 2.0 card reader? is it skinny enough to fit?

A: It will work with the reader. your computer must accept a type c connector or you will need this adapter: B&H# ANUSBAC

Q: 2. Second question: Will this also work with the Synco D2 when plugged into the new Beachtek-Max Active Audio Adapter DSLR?

A: No, the Deity Microphones V-Link 3.5mm TRS Male to XLR 3-Pin Male Microphone Adapter Cable will not work with the Synco Mic-D2 Hypercardioid Shotgun Microphone because it has a male XLR connector and the mic requires a female XLR connector. The V-Link Adapter Cable is intended for use with a microphone that has a 3.5mm output and requires plug-in power, but needs to connect to an XLR input. This cable does not allow phantom power to pass through to the microphone. It has a built-in phantom power converter that converts phantom power to 3 to 5V of plug-in power. The Mic-D2 needs to connect to an XLR mic input that can supply 48V of phantom power for the mic to operate.

Q: 3. Would this cable be good to run from a Vmount with usb c power delivery to my Sony a7siii?

A: Yes.

Q: 4. Will this work with a USB 3.2 Gen2 (USB3.1) type C port (10Gbps)?

A: It will work on the slower port at slower speeds.

Q: 5. Does this provide phantom power like the Deity Microphones D-XLR 3.5mm to XLR Adapter with Phantom to Plug-In Power Conversion BH #DEDXLR? I want to use my Deity Microphones V-Mic D3 Pro into a Focusrite Scarlett Solo interface to stream on Twitch with. Would this work?

A: Yes, the Deity Microphones V-Link 3.5mm TRS Male to XLR 3-Pin Male Microphone Adapter Cable can be used for the same types of applications as the Deity Microphones D-XLR 3.5mm to XLR Adapter with Phantom to Plug-In Power Conversion. Like the D-XLR Adapter, the V-Link Cable has a built-in power converter that will allow you to use phantom power (48V) from the XLR input on the Focusrite Scarlett Solo USB Audio Interface and then converts it to plug-in power (3 to 5V), which the Deity Microphones V-Mic D3 Pro Shotgun Microphone requires to function.

Q: 6. Is this fast enough to record from Blackmagic Pocket 4k to Samsung T5 SSD?

A: Yes, you should have no issues with this cable.

Q: 7. Can this cable be used for charging Fuji X-T5 camera?

A: Yes, the Angelbird USB 3.2 Gen 2 Type-C to Type-C Male Cable (3.28') should work on the Fujifilm x-t5 to attach to a usb charger to charge the battery.

Q: 8. Does this cable support video? Hoping to use from my Lenovo thunderbolt dock to my laptop

A: The Angelbird USB 3.2 Gen 2 Type-C to Type-C Male Cable (1.6') does support video through devices that support USB-C DisplayPort Alt mode. However, for the connection between a Lenovo Thunderbolt Dock and a laptop, I'd recommend the OWC Thunderbolt 4 USB Type-C Male Cable (2.3'), B&H # OWCCBLTB4C28.

Q: 9. Will this work the Synco D2 shotgun microphone (needs phantom) plugged into a passive Beachtek audio adapter?

A: No, the Deity Microphones V-Link 3.5mm TRS Male to XLR 3-Pin Male Microphone Adapter Cable will not work with the Synco Mic-D2 Hypercardioid Shotgun Microphone because it has a male XLR connector and the mic requires a female XLR connector. The V-Link Adapter Cable is intended for use with a microphone that has a 3.5mm output and requires plug-in power, but needs to connect to an XLR input. This cable does not allow phantom power to pass through to the microphone. It has a built-in phantom power converter that converts phantom power to 3 to 5V of plug-in power. The Mic-D2 needs to connect to an XLR mic input that can supply 48V of phantom power for the mic to operate.

Q: 10. Does it work with rode wireless go 2?

A: Yes this works with the Rode Go II