The CMC 6UNI XT Microphone Amplifier from Schoeps is designed for standard 12 or 48V phantom powering. As the capsules of condenser microphones from Schoeps cannot be directly connected to microphone cables or inputs, a microphone amplifier is required in between. The amplifier’s circuitry recognizes the supply voltage and adjusts itself automatically.

Its performance characteristics remain essentially the same with both 12 and 48V; mainly, the difference is that the current drawn at 12V is greater than at 48V. However, the 12V mode consumes less power and might be preferred for battery-powered recording.

The microphone amplifier provides the electrostatic charge which the capsule requires in order to produce a signal. Since only a miniscule amount of current is contained in this signal, amplification of the current is required. To avoid interference to the signal on the way from the microphone to the input of the mixer or preamp, the signal is conveyed at low impedance and in a balanced form. The amplifier offers a symmetrical, transformer-less, direct-coupled Class A output stage with low impedance, low distortion, and high freedom from interference.

The CMC 6UNI XT Microphone Amplifier is the 40 kHz version, which is indicated by the letters "xt" engraved on the microphone's output socket. It extends the frequency response of the axially addressed Colette capsules beyond 40 kHz.

Flat Frequency Response    Extremely Low Noise and Distortion    Balanced, Very Low-Impedance Output    Can Be Used With Very Long Cables    Well-Protected Against RFI    For Use with 12 or 48V Phantom Powering

Related Questions and Answers

Q: 1. What's the general maximum recording distance for basic dialogue work? How far away is it still usable with a good quality preamps?

A: The general rule for getting good dialogue with any shotgun mic, is to get as close as possible to the subject. 5 to 6 feet would be the maximum distance, based on surrounding ambient sound, that is suggested.

Q: 2. Can this be used on a Nikon Z9 Camera in Video Mode..?

A: No, the Schoeps CMIT 5U Shotgun Microphone Softie Kit is not natively compatible with the Nikon Z9. You would need a preamp unit like B&H # BEDXAPRE.

Q: 3. can i opt for the Mk4 with this set, instead of the mk41?

A: The Schoeps Colette CMC 6U Microphone Amp, MK 41 Supercardioid Condenser Capsule & Low-Cut Filter (Matte Gray), BH # SCMC641C60GS, does not offer the MK 4 capsule as an option.

Q: 4. What are the differences between cmc1 and cmc1u? tks.

A: The "CMC 1 U" is the part identifier for the amplifier portion of the Schoeps CMC 1 (the body of the microphone), without any capsule. The Schoeps CMC 1 Microphone Amp, MK 41 Supercardioid Condenser Capsule, and Cinela Windshield (Matte Gray) includes the amplifier, the MK 41 capsule, and a windshield.

Q: 5. Will this work for the DPA 4018c? Seems like it would due to the size of comparable mics.

A: Yes, the Rycote 041110 InVision INV-6 SOFT Shockmount is compatible for use with the DPA Microphones 4018C Compact Supercardioid Microphone,

Q: 6. Hey sound guys and cam ops, what if i put this on my camera top? for run and gun documentary filming? Will there be difference?

A: The Schoeps MiniCMIT is a high-quality short shotgun microphone that can be camera-mounted and used for run-and-gun documentary filming with excellent results.

Q: 7. How much humidity can the CMIT 5 handle? I live in Texas and just curious if this is a good option or if I should go with something else. Thanks!

A: Our customers from Florida, Hawaii, the Caribbean,Thailand, and the Phillippines all report excellent resultsfor many years of working with this microphone in very high humidty environments. It is tough enough for ENG use and location film shoots.Many televison crews use this mic to shoot outdoor sporting events in all sorts of weather conditions. Note : Use it with a shock mount to avoid any handling noise.

Q: 8. will this work with the CMC 1 and cut 60?

A: Yes, this should work with the CMC1 and the Cut 60 capsule together.

Q: 9. Does anyone recommend this mic to pair along with the Mixpre 6?

A: The CMIT 5U is a fantastic mic and will pair well with your MixPre 6.

Q: 10. How’s the rear and side rejection? Thx for your time in advance

A: Thank you for your question. This microphone features a Lobar/Supercardiod pattern for excellent rear and side rejection