Expand your SoundPath Tri-Band Wireless Audio system to an additional speaker, subwoofer, or amplifier with this SVS Add-On Receiver. Its 130' range (within line of sight) allows for versatile device placement. Up to six receivers can be paired with a single transmitter.

For the SoundPath Tri-Band Audio Adapter    Up to 130' Range    2.4, 5.2, and 5.8 GHz Wireless Bands    16-Bit / 48 kHz Audio    Stereo RCA Output    6 Hz to 20 kHz Frequency Response    LFE Support    <19 ms Latency

When connected to your Tri-Band Wireless Audio Adapter, this receiver auto-switches between the 2.4, 5.2, and 5.8 GHz wireless bands to select the most stable channel for uninterrupted audio playback. It's highly resistant to interference from Wi-Fi security cameras, routers, smart TVs, and other wireless devices.

This receiver passes pristine 16-bit / 48 kHz audio signal up to 130' with no noticeable delay.

The system streamlines home theater system setup by removing the need for long or complicated audio cables running along floors or walls.

The receiver picks up the complete audible frequency spectrum (6 Hz to 20 kHz, ±0.5 dB), providing a full-range wireless audio solution for subwoofers, powered speakers, and more with your SoundPath Tri-Band System. It's great for adding additional zones to create a single source, multi-zone audio system.

The system adds wireless connectivity, giving you more flexibility when placing subwoofers, powered speakers, and other audio components in a room, all without sacrificing performance.

• Deters against both in- and out-of-band sources of interference, including microwaves, wireless cameras, cordless phones, Bluetooth devices, and more
• Operates seamlessly alongside 802.11 b/g/n Wi-Fi
• Automatic antenna diversity minimizes fading and multi-path effects
• Seamless RF band/channel switching

Related Questions and Answers

Q: 1. Does it work well in the next room with a wall in between? (only about 12 feet away)

A: While specifically designed for line of sight use, it can work for a shorter distance, 10-20 feet, with an obstacle like a modern interior wall.

Q: 2. Will this work to extend wi-fi to an external garage if it's within range? I already have the router.

A: If you have another Synology Wireless Tri-Band Mesh Router, you can purchase another and use it as an extender to your existing router.

Q: 3. Can these be powered with PoE?

A: No, the Synology Wireless Tri-Band Mesh Router BH #SYMR2200AC does not take PoE power.

Q: 4. Will these work for wireless speaker or just woofers. Range and power so signal power Scott

A: Yes you can connect to speakers or a subwoofer using the SVS SoundPath Tri-Band Wireless Audio Adapter, but it would also depend on which outputs are available to you on the receiver that you are planning on using for it.

Q: 5. Can I connect this to my Marantz PM6006 amplifier? It does not have a dedicated sub output.

A: You would do that by going from the receiver into one of the RCA inputs on the Marantz amplifier. Your sound source would connect to the transmitter, from the RCA output or 1/8" output of that audio source.

Q: 6. Will this work with 3.5mm stereo source to sub rca input?

A: Yes the SVS SoundPath Wireless Audio Adapter includes an 1/8'' to RCA adapter for that compatibility of using a subwoofer as well.

Q: 7. Will this replace my current router and extenders?

A: This could be a replacement for your current router and extender. It's also likely you will experience faster speeds and a more stable network.

Q: 8. I do not have an RT2600, but I want to connect this to my existing MR2200ac that acts as my main router. Will two MR2200ac routers work with one acting as a satellite? Can I just plug it in and setup with no ethernet cable on the satellite one?

A: Yes, you can do that using 2 x MR2200AC.

Q: 9. Hi, will this work with the Netgear GS 308 switch?

A: Yes, the Netgear RAXE500 Nighthawk AXE11000 Wireless Tri-Band Gigabit Router would be compatible with a Netgear GS 308 switch.

Q: 10. I do not have an RT2600. My current main router is a MR2200AC. Can I use a second MR2200AC as a satellite with my current MR2200AC? Can I just plug the satellite MR2200AC into an outlet with no ethernet cable- sorry, 2 questions.

A: Yes, you can purchase a second unit and through MESH, have the two talk to each other. You do not need an Ethernet cable to the second unit.