Instead of using a hardwired controller, the 47" Wireless Carbon Fiber Motorized Camera Slider from GVM lets you manage and control the motorized motion via an iOS/Android app from your smartphone or tablet. Set A to B travel points and keyframed time-lapse sessions over a wireless Bluetooth connection, and capture smooth and professional-looking video and images. This belt-driven slider can be used in horizontal as well as tripod-mount inclined setups, with up to 11 lb cameras supported horizontally. A ball head is included with the slider so that you can easily adjust the tilt and swivel position of your camera. A bubble level is built into the slider carriage for checking your camera's balance.

The mobile app allows you to set the sliding speed from 1 to 100%. The app has two modes: manual and automatic. In manual mode, you can just control back and forth slides from the app, and in auto mode, you can assign specific travel points and round-trip motion. For time-lapse shots, six camera control cables are included that let you connect virtually all popular cameras from Canon, Nikon, Panasonic, and Sony.

The motor is positioned on one end of the slider and features a Sony L-series battery plate. An included NP-F750 battery provides up to 10 hours of operational runtime. The slider is made with carbon fiber rails, which allow for a lighter design than aluminum rails.

Wireless iOS/Android App Control    Belt Driven with Battery-Powered Motor    Manual and Looping Motorized Motion    Set A/B Points and Time-Lapse Keyframes    1 to 100% Adjustable Sliding Speed    11 lb Horizontal Payload    Ball Head Included    Six Camera Control Cables Included    1/4"-20 and 3/8"-16 Tripod Mount Threads    Up to 10 Hours of Operation Time

1/4"-20 and 3/8"-16 (with bushing) camera screws on the slider carriage (a ball head is included and can be attached to these screws)

1/4"-20 and 3/8"-16 tripod mount threads on the bottom

The slider can traverse the 47" sliding range in a minimum time of 17 seconds to a maximum of 184 seconds in video mode

In time-lapse mode, the speed range is 171 seconds to 33 minutes and 45 seconds at the slowest

Companion mobile app downloadable for free for iOS and Android

Related Questions and Answers

Q: 1. Can you plug in the slider to wall power instead of using a battery?

A: The GVM Wireless Carbon Fiber Motorized Camera Slider (47") (B&H# GVMSLIDER120) can be powered using the Power2000 AC-F550 AC/DC Adapter with Sony L-Series Dummy Battery (B&H# POACF550) in place of the battery for it.

Q: 2. Can this slider be setup in a way that it keeps moving during timelapse shooting? I would like to get motion blurring by shooting with long exposure times and camera movement during the exposure of each frame.

A: This GVM slider and most any slider during time lapse will stop for each captured frame. You would use Editing applications to create the Blur in post.

Q: 3. Can the pan be controlled as well for tracking subjects?

A: No, you will need to use a pan head.

Q: 4. How quiet is this slider?

A: The GVM Wireless Carbon Fiber Motorized Camera Slider motor can be heard at higher speeds and in time lapse mode there is a clicking sound.

Q: 5. what's the difference between this and GVM GP-120QD model? Only IOS/Android APP support?

A: The most notable difference between the GVM Wireless Carbon Fiber Motorized Camera Slider (47-) (GVMSLIDER120) and the GVM GP-120QD (GVGP120QD) Motorized Carbon Fiber Video Slider (48") is that GVMSLIDER120 can be controlled via app and that GVGP120QD is controlled with a wired remote. GVMSLIDER120 is also listed at 47" and GVGP120QD at 48".

Q: 6. What is the fastest it will travel from end to end?

A: The GVM Wireless Carbon Fiber Motorized Camera Slider (47") at its fastest speed takes 18 seconds to travel from one end of the slider to the other.

Q: 7. Will the slider trigger my Nikon D850 for Timelapse control? I want them synchronized.

A: Please add the following shutter cable to your purchase to control the Nikon D850 when using the GVM Wireless Carbon Fiber Motorized Camera Slider. Vello 2.5mm Remote Shutter Release Cable II for Cameras with Nikon 10-Pin Connectors BH #VERCC2N125

Q: 8. The specs state the horizontal load limit is 11 lbs. What is the vertical load limit?

A: The GVM Wireless Carbon Fiber Motorized Camera Slider (31") cannot handle a vertical load.

Q: 9. Can I operate this without the remote I case I lose my remote?

A: To perform the specialized moves and time lapse features, the remote will be required.

Q: 10. What is the difference between this and the GVM GT-120WD?

A: The GVM Wireless Carbon Fiber Motorized Camera Slider (47") uses on NP-F for power and can be controlled via a cellphone or tablet with an app, while the GVM GT-120WD Wireless Bluetooth Carbon Fiber Motorized Camera Slider (47") uses two NP-Fs for power and is controlled via an included wireless controller.