Computer Monitors With Hdmi Port

Iogear 4-port 4k Dual View Hdmi Kvmp Switch With Usb Hub And Audio (taa)

Product Code: ga91775
Availability: In Stock

$1,649.97 $2,623.45

Qty

15 reviews Write a review

Description
Reviews (15)

Maximize your workflow with the 4-Port 4K Dual View HDMI KVMP Switch from IOGEAR. With TAA-compliant KVMP to operate up to four HDMI-compatible computer systems using a single mouse, keyboard, and speaker setup. Connect up to two 4096 x 2160 resolution, 60 Hz 4K monitors to enhance your multitasking efficiency with more space for windows, applications, and large projects. Daisy-chaining an additional KVMP switch using the integrated RJ45 port enables support for up to four monitors. There are also 3.5mm ports located on the front and rear of the device for headphones and microphones with support for 7.1 audio. Use the dual-port USB 3.1 Gen 1 hub to share peripherals between systems, including printers, flash drives, and more. You can switch between computers using the device's front panel buttons, keyboard hotkeys, or by pressing the wheel on your compatible three-button mouse. This device is designed to work with Windows 7 or later, Mac, and Linux systems, and includes all KVM and audio cables along with a remote port selector.

Operate 4 Computers Dual Monitor Support HDMI Interface Supports up to 4096 x 2160 Resolution 2-Port USB 3.1 Gen 1 Hub Hotkey, Mouse, Push-Button Switching Includes Remote Port Selector Works with Windows, Mac & Linux

Key Specs
# of Systems Supported	4 (4 Cascade)
KVM I/O	8x HDMI 4x USB-B 3.0 / 3.1/3.2 Gen 1 (Keyboard) 4x 1/8" / 3.5 mm Audio 4x 1/8" / 3.5 mm Microphone
Console I/O	2x HDMI 2.0 1x USB-A (Keyboard) 1x USB-A (Mouse) 2x USB-A 3.0 / 3.1/USB 3.2 Gen 1 2x 1/8" / 3.5 mm Audio-Out 2x 1/8" / 3.5 mm Microphone Female 1x RJ45 1x 2.5 mm (Remote)
Supported Resolutions	4096 x 2160 @ 60 Hz
General
# of Systems Supported	4 (4 Cascade)
KVM I/O	8x HDMI 4x USB-B 3.0 / 3.1/3.2 Gen 1 (Keyboard) 4x 1/8" / 3.5 mm Audio 4x 1/8" / 3.5 mm Microphone
Console I/O	2x HDMI 2.0 1x USB-A (Keyboard) 1x USB-A (Mouse) 2x USB-A 3.0 / 3.1/USB 3.2 Gen 1 2x 1/8" / 3.5 mm Audio-Out 2x 1/8" / 3.5 mm Microphone Female 1x RJ45 1x 2.5 mm (Remote)
Scan Interval Range	1 to 99 secs (5 secs Default)
Supported Resolutions	4096 x 2160 @ 60 Hz
USB Keyboard/Mouse Emulation	Yes
Operating System Support	Linux, Windows, macOS/OS X
OS Compatibility	Linux Windows macOS
Power
Power Source	AC Adapter
DC Input Power	12 VDC
Power Consumption	4.42 W
Environmental
Operating Temperature	32 to 104°F / 0 to 40°C
Operating Humidity	80%
Storage Temperature	-4 to 140°F / -20 to 60°C
Physical
Cable Length	6' / 1.8 m (USB) 6' / 1.8 m (Video) 6' / 1.8 m (Audio)
Housing Material	Metal
Dimensions	6.3 x 1.7 x 13.2" / 16.1 x 4.4 x 33.5 cm
Weight	3.5 lb / 1.6 kg
Packaging Info
Package Weight	9.35 lb
Box Dimensions (LxWxH)	21.1 x 9.3 x 5.2"

Related Questions and Answers

Q: 1. How many of the ports support power transfer?

A: Power / charging is supported on all the ports of the IOGEAR met(AL) USB 3.0 4-Port Hub with Power Adapter.

Q: 2. From one of the answers, it sounds as though the hub will work without the AC. Is this true?

A: You should be able to use the IOGEAR met(AL) USB 3.0 4-Port Hub with Power Adapter without its power supply. But that's going to depend on the devices you're planning to connect. If you're connecting multiple external hard drives, I recommend to use the hub with its power supply.

Q: 3. How long is the attached cable for this dock?

A: It is not specified but based on the length and the image it is approximately 6".

Q: 4. Can you connect this switcher to itself with the RS232 control cable and control multiple units at once?

A: The RS-232 connection on this unit is available so it can be be paired with a high-end control system, such as products made by Crestron and Extron. You should be able to connect multiple of these units to such a control system, however you will want to consult with an AV Engineer about creating such an advanced system.

Q: 5. Will this plug directly into a 2019 iMac with USB C ports or is an adapter required?

A: You would just need to go and connect this device using the USB-A port.

Q: 6. Does this unit support eARC for all inputs and output?

A: The IOGEAR 4KX2K 4-Port HDMI Switch supports Consumer Electronics Control (CEC), however there is no mention of eARC support.

Q: 7. What is the utility of the RS-232 connector? It is not mentioned in product description.

A: RS-232 input allows you remote control usually through a video switcher or some other remote control device.

Q: 8. What is the timed delay in switching?

A: When switching between inputs you will experience a few second delay, this would be common for most AV Switchers like this. If you have more specific needs or questions please email us directly at provideo@a href= http://bhphoto.com target= _blank bhphoto.com/a and we can assist you further.

Q: 9. Would this be compatible with an equipment rack?

A: Yes, this HDMI switcher comes with rack ears that you attach to make it rack mountable.

Q: 10. Will this power adapter works with 220 V?

A: The power adapter of the IOGEAR met(AL) USB 3.0 4-Port Hub can also support 220v.

Prince	22/09/2024
IO GEAR GUH 304P COULD BE UTILIZED,WITH LAPTOP , COMPUTER , FOR ADDITIONAL USB LIGHTING , ETC., THESE GUH 304P UNIT,S, I PURCHASED, SEVERAL & CONTENT / APPROVE OF THEIR FUNCTIONAL CAPACITY. HONESTLY, I,D RECOMMEND, WHOMEVER/ WHICHEVER ,CUSTOMER, TO UTILIZE IO GEAR GUH 304P , WITH LOVE , JOY , HAPPINESS , BALANCE, CONTENTMENT! 5

David	15/09/2024
Works well, Very well made. 5

Ankur	07/09/2024
Good unit, not frills, just does what it says. 5

Stephen	05/09/2024
I have a Mac with 4 USB 3 ports and a Thunderbolt Dock with 3 USB 3 ports, but I still needed a convenient location with powered USB 3 ports for frequently used devices such as iOS devices and thumb drives. This fits the bill perfectly. It conveniently sits on top where it is easy to plug & unplug devices. It has a small blue pilot light that confirms that it has power. It will work without external power in an emergency if the devices that are plugged in don't demand much power. 5

Steven	24/08/2024
Has worked fine, solves my needs. 5

gato	01/08/2024
yes I recommend this product 5

Murray	29/07/2024
If you need a port hub make sure it has power. No signal loss. 5

Brad	29/06/2024
This hub works very well with our computer system setup and all of our peripherals our system is supporting such as printer, backup drives, scanner, etc. We find no lag in data transfer speeds. 5

Charles	22/06/2024
Perfect, the inclusion of the power adapter is just the way it should be. 5

Peter	28/05/2024
Plug my external drives and mouse into it, then plug it into my laptop. Being on the road, it is almost a docking station for the hotel room. Small and light enough to keep in my laptop back-pack, yet sturdy enough that it will not get crushed in there either. My laptop only has USB 2.0 ports, so I cannot say anything about the speed. 5