Fashion your own connector cables for wireless gear using this Cable Techniques CT-LPS-T35L-Y Low-Profile Right-Angle 3.5mm TRS Screw-Locking Connector. Pairing nicely with the company's line of high-quality CT-RAWCB-272 bulk cable, this connector allows connections to the Sennheiser Wireless G4 or G3, to Sony wireless systems, Diety systems, the RodeLink, and more.

This screw-locking, gold-contacted, right-angled 3.5mm connector is color-coordinated, giving you a yellow cap to help distinguish connections in the field. It can accept cable diameters up to 5mm. Use this connector for DIY cable builds: it will work with popular unterminated cables such as Belden's 1804A, Mogami's W2901, W3031, W2697, and others.

For Building Wireless Cables    Works with Sony, Diety, Rode & More    Right-Angled 3.5mm Connection    Gold Contacts    5mm Cap    Color-Coordinated for Differentiation

Related Questions and Answers

Q: 1. Can BH ask CT to produce longer cable lengths please? 12 inches is Too short. Are there any other cable manufacturers selling this type on cable? Thx

A: We are definitely able to reach out to Cable techniques and request a custom order. Please call our audio phone sales team to inquire further. If you desire a slightly longer cable (18 ), you may consider the KOLMT100.

Q: 2. Can I use my zoom f8 as master and use this cable to jam sync timecode into the TC-1?

A: Yes, the Deity TC-1 can be jammed with the C15 Right-Angle Locking 3.5mm TRS to Right-Angle BNC Timecode Cable.

Q: 3. Is the Senal Right-Angle Locking 1/8" Mini to 3-Pin XLR Output Cable (15") a truly balanced connector?

A: Yes. This is a balanced connector.

Q: 4. Can anyone tell me how long the actual cable is?

A: The Deity Microphones RX-Link Locking Right Angle 3.5mm TRS Male to Right-Angle XLR Male Cable is 40cm (15.75 in) long.

Q: 5. Can I use this to jam the blackmagic video assist 5 inch 12g?

A: No, the Deity Microphones C15 Right-Angle Locking 3.5mm TRS to Right-Angle BNC Timecode Cable is intended for use with the Deity Microphones TC-1 Wireless Timecode Generator Box (B&H # DEDTT0272D80) which uses a locking 3.5mm connector. The BNC connector would be for connection to the timecode input on the device that you are connecting to. The Blackmagic Design Video Assist 5" 12G-SDI/HDMI HDR Recording Monitor has a non-locking 3.5mm audio input, so if you are jamming timecode to the audio input you need a cable that has a non-locking 3.5mm TRS connector. If you are feeding timecode from a device with BNC timecode output, you can use the Tentacle Sync Tentacle to BNC Cable - Right-Angle, 16" (B&H # TEC08) or the Tentacle Sync Tentacle to BNC Cable - Straight, 16" (B&H # TEC06).

Q: 6. Would this work to split two wireless transmitters into two separate channels recorded onto a tascam dr-70d?

A: The RODE SC11 Right-Angle 3.5mm TRS Y-Splitter Cable can split the audio from the 3.5mm output on a dual-channel wireless receiver and send the audio to two 3.5mm audio inputs, but the TASCAM DR-70D Multitrack Field Recorder has only one 3.5mm input and four XLR-1/4" combo-jack inputs. As a better option, you can use a 3.5mm to dual XLR male cable like the Cable Techniques 3.5mm Right-Angle TRS to Dual Low-Profile 3-Pin XLR Male Y Cable - 15" (B&H # CATGO2YX3M15) or the Hosa Technology Pro Stereo Breakout Cable - 3.5mm Stereo Mini to Dual 3-Pin XLR Male - 3' (B&H # HOHMX003Y).

Q: 7. Can this cable connect the output of a Rode Wireless Go 2 Receiver to 2 mono XLR inputs with VXLR, VXLR+ or VXLR Pro adapters?

A: You can use the RODE SC11 Right-Angle 3.5mm TRS Y-Splitter Cable with two RODE VXLR 3.5mm TRS Female to XLR Male Adapters (B&H # ROVXLR), but a simpler and less expensive option would be to use a cable like the Kopul Y-Cable with 1/8" TRS Stereo Mini to 2 XLR Male Connectors - 10' (B&H # KOSMYCM2XM10).

Q: 8. Is this compatible with Sennheiser receivers?

A: Yes, this Senal cable is compatible with Sennheiser receivers. You may also want to look at the Sennheiser CL1 cable (B&H # SECL1) which serves the same purpose.

Q: 9. I have sennheisr avx receiver will this work and get power with this cable on a canon c70?

A: Yes, the Cable Techniques Low-Profile XLR3F to TA3M Cable for Canon EOS C70, EOS C400, and Blackmagic Pocket Cinema (15") will transmit phantom power to the AVX Camera Mount receiver.

Q: 10. Will this work connected to 2 Rode receivers (so I want to record 4 transmitters), to my Sony A7R5, (4 channels of audio)?

A: The RODE SC11 Right-Angle 3.5mm TRS Y-Splitter Cable is designed for connecting the mono outputs of two devices and sending it to separate channels on a device with a single 3.5mm TRS mic input. The SC11 will carry only two channels of audio. It can be used to connect the mono (combined) output signal from two dual-channel wireless receivers, like the RODE Wireless GO II Microphone System, to the mic input on a camera such as the Sony a7R V Mirrorless Camera. The audio carried by the cable will have the combined audio from one system on the left side and the combined audio the second system on the right side.