Looking to hang your CDL12P loudspeakers? Check out the PreSonus CDL12P Rigging Grid, a metal frame that's designed to connect and hang up to six CDL12P loudspeakers.

Holds up to 6 CDL12P Loudspeakers

Related Questions and Answers

Q: 1. I have a PreSonus StudiLive AR12 mixer. Would I be correct in saying that this sits before the mixer in the chain? So mic into this channel, channel out to the mixer. If so would I bring it in as a mixer channel insert? Thanks everyone!

A: You could use it as in insert, but you would use the AR12 mic input, which would defeat the purpose of having an external preamp. The better way is to connect your mic to the preamp and then connect the preamp to one of the line/instr inputs on channels one or two on the AR12.

Q: 2. Am I understanding this correctly--the PreSonus Studio Channel has a compressor, but does NOT have a Noise Gate? Meaning that noise gets increased in volume as well? Thanks.

A: Correct, there is no noise gate or expander in the Studio Channel. Compressors don't increase level (or noise), they only decrease or limit dynamic range. If you don't have your input gain set correctly, that will decrease your signal-to-noise ratio. If you apply compression to a noisy signal, that noise will seem louder because you've brought the input signal peak and noise floor closer together by compressing the dynamic range of that original signal. Hope that helps!

Q: 3. Does this model have auto mic and gain mix to use in conferences?

A: No, the PreSonus StudioLive 32SC Series III S Digital Mixer/Recorder/Interface does not have built-in automatic mic mixing. It does have a ducker which prioritizes a microphone over another audio source when the mic receives audio input, but it will not automatically set the gain for multiple microphones.

Q: 4. Do you need to change the fuse to use it with 220v ?

A: Yes, the PreSonus AIR10 2-Way Active Sound-Reinforcement Loudspeakers (Single) will need a different fuse to operate at 220V. The fuse included fuse for operation at 100 to 120V is a T5AL 250V, while the fuse required for operation at 220 to 240V is a T2.5AL 250V.

Q: 5. Does this also fit the 64s?

A: Yes, the dimensions of the Presonus Studiolive 64s and StudioLive 32 are identical, so this cover will fit either model.

Q: 6. is this compatible with two JBL AWC62's as well as two JBL AWC129's?

A: Yes

Q: 7. Will this cover fit on the PreSonus 32SX?

A: The 32SX is one inch deeper then the 24 may fit but tight.

Q: 8. Does the retroFlex-S cage fit the a6500?

A: Hi Claudiothanks for asking. It will work without being centered, but if you are set on that, you'll need to pick up some third party gear to make that work. An arca-swiss style plate with a screw slot should work just fine for that. I hope that helps

Q: 9. Does it fit with sony alpha a7 iii?

A: Hi Carlos - the retroFlex is designed for the Sony Alpha 5000 and 6000 series cameras

Q: 10. Does run/stop button on the pistol grip actually trigger the video recording function of a5100? or is it only works for still shooting?

A: Hi Jihoon - yes, the grip triggers video start/stop. thanks for asking!