The Vmicro Single V-Mount Battery Adapter Plate from bebob offers a lightweight, high-capacity battery solution that mounts a single Vmicro V-mount battery with multiple outputs to simultaneously power your Sony PXW-FX9 cinema camera as well as a variety of accessories mounted on your camera rig. The durable plate features two unregulated 12 VDC D-Tap outputs, one 12 VDC 2-pin LEMO-type output, one 5 VDC USB Type-A output, and a 19.5 VDC barrel output on the end of a short cable to power the camera.

The two D-Tap outputs are "twist" plugs that allow you to plug your D-Tap connector in either direction. The plate also features a 4-pin XLR input to power the plate from an alternate source, and it allows hot-swap capability with either mains power or the camera's BP-U battery. The plate mounts onto the back of the camera using its integrated top plate and captive screws.

Single V-Mount Battery Plate for FX9    Mounts on Camera with Captive Screws    Compatible with Vmicro Batteries    2 x 12 VDC Twist D-Tap Outputs    1 x 12 VDC 2-Pin LEMO-Type Output    1 x 5 VDC USB Type-A Output    1 x 4-Pin XLR 10-17 VDC Hot-Swap Input    19.5 VDC Barrel Camera Cable Output    Allows Hot-Swapping with FX9 Battery    Durable Aluminum Construction

Sony PXW-FX9 cinema camera
A professional V-mount Vmicro battery

Related Questions and Answers

Q: 1. Can I mount accessories on top of v-mount adapter? I see three holes that looks like quarter inch screw holes.

A: Yes, those 3 holes are 1/4"-20 threadings.

Q: 2. is this rigid enough to operate the camera from (on fluid head)?

A: Yes, the SHAPE Swing-Away Battery Plate for Sony FX9 (V-Mount) for the Sony PXW-FX9 XDCAM 6K Full-Frame Camera System is fairly solid for its mounting method for use on a fluid head.

Q: 3. What case would you recommend for this setup?

A: A good rig case solution for the Tilta Camera Cage with Battery Plate for Sony PXW-FX9 is the following: PortaBrace RIG-2SRKOR Camera Case with Wheels (Black) BH #PORIG2SRKOR https://bhpho.to/3KdsHXR

Q: 4. Will the mount close completely with a large BPU-96wh batteries in the camera slot?

A: No, if the SHAPE Swing-Away Battery Plate for Sony FX9 (V-Mount) (B&H# SHVPBFX) is installed on the Sony PXW-FX9 XDCAM 6K Full-Frame Camera System (Body Only) (B&H# SOPXWFX9) there will not be enough room for a large battery in that size range.

Q: 5. Can I have a Sony battery in the camera simultaneously for hot swapping while this is attached?

A: The Small Battery that the FX9 comes with can be installed in behind this unit.

Q: 6. Does the 4 pin XLR power input feed the D-tap outputs as well? I would have a monitor plugged into the P-tap.

A: It does not. That is a power input, not an output.

Q: 7. Does the 4 pin connector allow me to connect to the battery charger from the camera to power it?

A: no it does not, but it does allow the use of a 4pin XLR power supply to power the camera and how swap batteries

Q: 8. Will it work with the regular RED V-raptor? no the XL?

A: No, the bebob B-Mount Battery Adapter to V-Mount 24V Plate for RED V-RAPTOR XL would not be compatible with the RED DIGITAL CINEMA V-RAPTOR 8K VV DSMC3 Camera as that camera is not compatible with 24V batteries and attaching 24V B-Mount batteries using this adapter could damage the camera.

Q: 9. By connecting to the 9-pin on the Komodo, I take it with using it with the Komodo you loose the ability to input timecode unless the jam sync happens before installing this product?

A: The Bebob Vmicro V-Mount Battery Adapter Plate for RED KOMODO, uses the 2 pin Lemo connection to the RED Komodo. It does not use the 9-pin connection, and as such, the RED Komodo Expander, could still be attached to the camera for timecode functionality.

Q: 10. What is the dtap voltage output?

A: The D-Tap output is 12V unreg.