The black UMM-WMT-32 Tilt Wall Mount for UML323 32" LED Monitor from Bosch comes in 2 pieces, namely, a VESA-compliant mounting plate that attaches to the monitor and a V-shaped wall bracket. Once both pieces of the mount are attached, the monitor slides into the V-shaped bracket on the wall, making installation quick and easy. A set screw secures the 2 sections of the mount together.

The UMM-WMT-32 wall mount accommodates a 32" monitor with mounting holes spaced 200 x 200mm or 200 x 100mm, horizontally and vertically. The mount can support a monitor up to 35kg in weight, and can tilt the monitor 20°.

Swivel and tilt wall mount bracket for LCD monitors

Easy to install 2-piece design brackets

Related Questions and Answers

Q: 1. If I wanted to push my monitors all the way back to the edge of my desk, how much space is needed between my desk and the wall?

A: If the arms for the Mount-It! Dual-Monitor Desk Mount for Displays up to 32" (Black), B&H # MOMI1772B, are rotated away from the back wall, it would be recommended to have at least 2" of space between the desk and the wall.

Q: 2. can this REALLY fit THREE 32" monitors?

A: Yes. The Mount-It! Triple Monitor Desk Mount for 24 to 32" Displays BH #MOMI2753 will accommodate up to 3 32" monitors.

Q: 3. Can it be configured to have only one arm attached to the base?

A: Mount-It! Dual-Monitor Desk Mount for Displays up to 32" (Black) BH #MOMI1772B • MFR #MI-1772B is designed for both arms to be connected and operational.

Q: 4. Will this work with the Playbar?

A: The FLEXSON Full-Motion Wall Mount for 32 to 70" TVs and a Sonos Arc or Beam BH #FLARCM701021 is not compatible with e older SONOS Playbar.

Q: 5. Is there a template for mounting

A: NO! Completely unnecessary! Figure the center of where you want the tv, left,right and up,down and mark it with a pencil. Before removing uprights spread them out to max and that is the most they can be mounted apart from each other on the wall. I would subtract an inch to avoid problems. Ideally you want to mount them 22-26 inches apart at the same height. It is all dictated by where your studs are located. Just dont mount to close together, less than 16 inches apart you best keep it centered all the time. Remove the uprights from the crossbars. You can use the same upright to mark both sets of holes. Your template. Use hardware capable of bearing the load(250lbs). If they are mounted at different heights as long as not to much. Half inch or so. There are screws at the top of each to level the bars perfectly. This is probably the BEST TV stand for sale anywhere! GOOD LUCK!!!

Q: 6. What is the length of the long screw?

A: The long screw is M7 x 70 mm. The long bolt is M8 x 60mm.

Q: 7. Are there openings in the metal to pass wires through the wall?

A: The Kanto Living R500 Recessed Articulating Wall Mount for 46 to 80" Displays BH #KAR500 offers punchouts for holes and cable pass throughs.

Q: 8. Do you carry the optional hardware for grommet installations?

A: The optional grommet hardware/base for the Mount-It! Dual-Monitor Desk Mount for Displays up to 32" (Black), BH # MOMI1772B is included in the main package.

Q: 9. What prevents the display from mounting flush with the wall? I don't understand why there is a 1.25" distance from the wall if the whole mount is recessed.

A: This is a limitation of the design.

Q: 10. How do you attach this to drywall without permanently damaging the wall?

A: The Primacoustic EcoScapes Slat Wall does permanently attach to the wall either with glue or screws, so the installation will damage the wall. If you do plan on removing the panels at a later date, the holes from screws may be easiest to touch up compared to the glue. Here is a link with the installation instructions: https://www.bhphotovideo.com/lit_files/991195.pdf