Add customized slider moves to your concert, festival, or other event footage with the Remote-Controlled Slider for DJI RS2 from CAME-TV. This four-wheel slider supports up to 26.5 lb and comes with a remote control, a slider motor, a 100/75mm combination bowl adapter, a DJI RS 2 mount, and a track system that extends to a maximum length of 5.2'.

The joystick-style remote control works with both the motorized slider and your RS 2 gimbal. Use it to assign A/B start and end points or to set a constant speed, soft start and stop, or loop function for your slider movement.

4-Wheel Dolly, 5.2' Total Track Length    Remote-Control Dolly & Gimbal Functions    100/75mm Combo Bowl & DJI RS 2 Adapters    Up to 160' Range, 26.5 lb Payload    150mm Bowl Adapter Available Separately    Dual Power Supply

Includes a four-wheeled slider and track system that extends to a maximum of 5.2' and supports up to 26.5 lb.

Joystick remote unit provides both dolly and gimbal remote control at a range of up to 164'. Functions include:

• A to B point positioning
• Cruise at set speed
• Soft start and stop
• Automatic round trip

The package includes a DJI RS 2 Adapter and a 75/100mm combination ball adapter.

Related Questions and Answers

Q: 1. Will this work for Edelkrone slider Plus Long?

A: The CAME-TV Slider Support Rods (Pair) (B&H# CASROD2) provides fixed (i.e., non moving) support for a slider on either side of a tripod. In contrast, the specific design of the edelkrone SliderPLUS v5 Long (B&H# ED81204) (and those of other similar SliderPLUS products from edelkrone) requires it to move not only the carriage on top of the slider but also the rails of the slider itself from side to side. Since attaching the CAME-TV Slider Support Rods to it would make that movement impossible, we would not consider the two products to be compatible.

Q: 2. Can the rig be angled for ascending and descending shots?

A: CAME-TV does not state that the CAME-TV Remote-Controlled Slider for DJI RS2 Gimbal with 5.2' Track can be used in an angled position. It is recommended to use the slider in a horizontal position for best performance.

Q: 3. does it plug into the same input as the external microphone?

A: No, the remote port and the mic port are seperate.

Q: 4. What is the total length of the cable on the remote? It looks like it comes with an extension segment; so if you add that how far will it reach? Thanks.

A: The main cable on the Panasonic DMW-RS2 Remote Shutter is 31.4".

Q: 5. What is the weight-bearing capacity for this slider?

A: It is our opinion that the sliders weight capacity is approximately 8 lbs / 3.6 kg.

Q: 6. does it have a time lapse feature?

A: Yes it does, this system comes with six Shutter Link Cables for select cameras. The shutter link cables are there to control the shutter on a camera for a time lapse.

Q: 7. Does the N1 or N3 cable will work with Nikon D7500? Thank you.

A: the manufacturer does not list the D7500 but the closest camera to that model is the D7100 and that uses the N3 type cable

Q: 8. Will it work with the new Canon EOS RP?

A: Yes The CAME-TV Motorized Parallax Slider (23.6") B&H # CAS0160 MFR # S01-60 will work with The Canon EOS RP. The RP would us the C3 cable.

Q: 9. Can this be used upside down, for overhead tabletop shots?

A: This product was not designed with overhead shots in mind. It may still work for such a set up, but you would need to customize a solution to operate it in such a way. So that we may best assist you finding the proper product for your needs feel free to email us directly at askbh@bhphoto.com.

Q: 10. Does this shutter device work for starting and stopping video remotely as well as photographs?

A: If you can assign your camera to start/stop video on the shutter release button than you can make this work to start video