As the company's premium line of instrument cable for electric bass guitar, the 21' Monster Cable Prolink Bass Instrument Cable incorporates carefully designed construction to offer maximum bass extension, articulation, and dynamic range for discerning players and tone aficionados. It boasts custom Monster 1/4" TS male connectors (straight on each end) with 24kt gold contacts, and it features multi-gauge wire networks protected by MicroFiber, PEX, and carbon-infused dielectrics. Additionally, there is 95% copper braided shielding, collet strain relief, and a Duraflex jacket. The result is a top-shelf cable that yields minimal handling noise and magnetic interference while maintaining proper low-frequency performance and transients to improve the tone of your rig.

Premium Cable for Electric Bass Guitar    Custom Monster 1/4" TS Male Connectors    Straight Connectors    24kt Gold Contacts    Minimal Handling Noise    Maximum Bass Extension & Fast Transients    Collet Strain Relief    Carbon-Infused Polymer Covering    95% Copper Braided Shielding    Lifetime Cable Warranty

Monster Bass pro audio cable's single heavy-gauge bass conductor delivers maximum low-frequency signal and taut, articulate bass, all without annoying buzzes and hums.

Multiple gauge wire networks preserve fast transients and wide dynamic range.

A dense shield rejects interference and hum, and heavy-duty 24kt gold connectors increase conductivity and resist corrosion.

Monster set the standard with the Original Lifetime Cable Warranty. Your Monster Bass pro audio instrument cable is covered by their 100% replacement guarantee, so you'll be a Monster for life.

• Multiple gauge high- and low-frequency wire networks for fast transients, greater clarity, and wide dynamic range
• Designed for tight bottom end and dynamic punch
• Custom Monster connectors with 24kt gold contacts
• Black, easy-grab barrel style
• Durable connector design featuring collet strain relief
• Duraflex protective jacket
• Carbon-infused polymer covering minimizes handling and vibration noise
• 95% copper braided shield minimizes interference and hum
• MicroFiber dielectric provides isolation of magnetic fields
• Lifetime cable warranty

Related Questions and Answers

Q: 1. Will this connect a Nikon D780 to MacBook?

A: The Tether Tools TetherPro USB Type-C Male to USB Type-C Male Cable would be compatible with both the camera and Macbook as long as both devices support USB-C.

Q: 2. Can this cable be used for charging Fuji X-T5 camera?

A: Yes, the Angelbird USB 3.2 Gen 2 Type-C to Type-C Male Cable (3.28') should work on the Fujifilm x-t5 to attach to a usb charger to charge the battery.

Q: 3. Would this cable be good to run from a Vmount with usb c power delivery to my Sony a7siii?

A: Yes.

Q: 4. Which Profoto Air Sync Cable (specific product/item #) do I need to purchase/require: to connect one of my Profoto Air Remote(#901031; non TTL, with 3.5mm miniphone plug for sync signal in/out) to one of my off-camera Canon 600EX-RT speedlight; to then trigger that Canon 600EX-RT speedlight (in non-optical, slave sync) to receive a nonTTL radio signal from one of my Profoto Air Remote TTL-C(#901039), which would be mounted in the hot shoe of one of my Canon 5DmkIII cameras?The result being: the triggering of both my off-camera Profoto B1 500 Air TTL (via the camera mounted Profoto Air Remote TTL-C) and the triggering of my off-camera Canon 600EX-RT speedlight (via cable connected Profoto Air Remote).Do I purchase/use one of the following Profoto Air Sync Cable:Profoto #103016 (1/4 phone male to 3.5mm miniphone male),orProfoto #103020 (male 3.5mm miniphone to male 3.5mm miniphone),or?Thank you for any help, or clarity on the Profoto product # required.Mary

A: Hi Mary Ann,You will need the Miniphone to Miniphone cable #103020.

Q: 5. Anyone used this cable to trigger a Hasselblad X1D ii remotely?

A: The Profoto Male 1/4" Phono to Male 3.5mm Miniphone Cable - 11.8" can be used to trigger a Hasselblad X1D ii remotely

Q: 6. Is this (BH #TECUC15RTORG MFR #CUC15RT-ORG) suitable for tethering GFX 50S II with M1 Pro macbook with-Thunderbolt 4 ports?

A: Yes, this would be the proper cable to tether your camera and computer.

Q: 7. Compatible with Sony A1?

A: Yes, the Tether Tools TetherPro USB Type-C Male to USB Type-C Male Cable (15', Orange) would be compatible for use with the Sony a1 Mirrorless Camera.

Q: 8. Will this work with a PhseOne iq4 and 2021 Macbook Pro?

A: The Tether Tools TetherPro USB Type-C Male to USB Type-C Male Cable (15', Orange) BH #TECUC15RTORG is the correct cable for an IQ4 and a 2021 Macbook Pro.

Q: 9. I'm using Sony a1, but the computer I wanted to use for tethering is an Apple Macbook pro from late 2015 (older version thunderbolt that looks like mini usb mini, hdmi port, and usb-a) In this case, how should I use this cable to connect my camera to the computer?

A: You can also use the USB-A port on your computer and the cable on the following link would also work, just copy and paste it on the address bar: https://bhpho.to/3ynwDiV

Q: 10. Will this work with a USB 3.2 Gen2 (USB3.1) type C port (10Gbps)?

A: It will work on the slower port at slower speeds.