Add a professional, high-capacity battery plate to power your Blackmagic Pocket Cinema Camera 6K Pro rig with this compact Micro Battery Slide Pro from Wooden Camera. It supports one Gold mount battery while leaving access to the camera's standard battery compartment, and it powers the camera using a 2-pin LEMO-type connector cable. With the camera's L-series battery in place, hot swapping is supported.

The battery slide mounts onto optional 15mm rods using its integrated 15mm LWS rod clamp. It also features two 5.8V D-Tap outputs for powering accessories. Each D-Tap accessory output features a digital fuse that monitors the D-Tap port and disables it if it exceeds the set current for accessories, leaving the camera running without interruption. Once the load has been reduced by removing accessories, a reset button can be pressed to enable accessory power again.

Supports Gold Mount Battery    Mounts onto Optional 15mm LWS Rods    Power Camera with 2-Pin LEMO-Type Cable    Can Hot Swap with Camera Battery    Provides 14V Power to Camera    2 x 5.8A D-Tap Accessory Outputs    Protective Digital Accessory Fuse

Blackmagic Pocket Cinema Camera 6K Pro
Gold mount battery

Related Questions and Answers

Q: 1. Is this compatible with the new 6k full frame?

A: The Wooden Camera Cage for Blackmagic Pocket Cinema Camera 6K Pro will not be compatible with the new BMCC6k.

Q: 2. What 3 pin LEMO cables can be used with this?

A: A great solution to consider for 3-pin LEMO cables for use with the Wooden Camera Micro Battery Slide Pro (Micro Gold Mount) is to make custom cable using the power cable customizer from Wooden Camera. See the link below: https://bhpho.to/3NNzPMd

Q: 3. Will the lens support post work with Zeiss CP.2 EF lenses? It doesn't look like it will stand out far enough from the camera body to align with the lens support thread.

A: You'd have to make sure the camera is positioned such that its mount is roughly flush (or in front of the front) of the the Wooden Camera 15mm LWS Baseplate for Blackmagic Pocket Cinema Camera 6K Pro (B&H# WOA10026) in order to use a lens like that.

Q: 4. Is the cage compatible with the new BMCC6K Full Frame?

A: Including the Wooden Camera Unified Accessory Kit for Blackmagic Pocket Cinema Camera 6K, there are no cages that accommodate the new Blackmagic Cinema Camera 6K L mount at this time.

Q: 5. Will cages designed for the BMPCC 6K work with a 6K Pro that has this grip attached?

A: The dimensions of the 6K Pro + Pro Grip are larger than the 6K + Grip, so most cages designed for the 6K body probably won't work.

Q: 6. is it compatible with the new Black magic cinema 6k L mount?

A: Yes, the Blackmagic Design Pocket Cinema Camera Battery Grip for 6K Pro will also support, and work with the Blackmagic Cinema Camera 6K.

Q: 7. Is there any chance to use this with a c70 (with the a different power cable)?

A: Yes, The Wooden Camera Micro Battery Slide Pro for Blackmagic Pocket Cinema Camera 6K Pro would support the Canon C70 as well by adding this optional power cable https://bhpho.to/35PJ4Yt

Q: 8. Will this connect to the wooden unified cage for my BMPCC4K using the plate that comes with the cage?

A: If you are referring to the Battery Slide provided in the kits, yes this is compatible.

Q: 9. Can this be used to power other cameras such as c300 mk iii with the correct d-tap cable?

A: No, specific plate comes with the connects for the Blackmagic Pocket Cinema Camera 6K Pro. If you want to use a gold mount plate for the Canon C300 mk iii you will need this: BH #WO282200

Q: 10. Does this only fit the Blackmagic 6K or can this baseplate accommodate other cameras like Canon R5C?

A: The Wooden Camera 15mm LWS Baseplate for Blackmagic Pocket Cinema Camera 6K Pro (B&H# WOA10026) could be used with the Canon EOS R5 C Mirrorless Cinema Camera (B&H# CAER5C).