Power your Sony FX6 via a Gold mount battery with the Anton/Bauer Micro Battery Slide Pro, which steps up the output voltage of your Gold mount battery to the 19.5 VDC required to power your camera via its DC input power port. The battery bracket supports standard- and micro-sized batteries, and it attaches directly to the extension unit connector on the top of your camera, which provides an anchor point for compact and secure connection of the plate to the camera without requiring you to mount it on support rods.

The attachment point also acts as a hinge for the plate, allowing you to access the camera's BPU battery slot, allowing you to hot-swap Gold mount batteries, and change the Gold mount or BPU battery without turning off the camera. Each of the two P-Tap connectors provides unregulated power output from your Gold mount battery for powering accessories, and multiple 1/4"-20 mounting holes allow you to attach accessories directly to the plate.

19.5 VDC Output via DC Connector    Mounts Directly on Sony FX6    For Standard- and Micro-Sized Batteries    Allows Access to BPU Battery Compartment    2 x P-Taps for Powering Accessories    1/4"-20 Accessory Mounting Holes

The quick-hinge design retains access to the camera's internal BPU battery compartment, allowing continuous shooting by hot-swapping internal and external batteries

The Battery Slide Pro plate steps up the output of a 14.4V battery to the required 19.5 VDC to power your camera via its DC-in port

The lightweight plate is small in size, for a small footprint when mounted on your camera, but it supports both standard- and micro-sized Gold mount batteries

Related Questions and Answers

Q: 1. When the V-mount battery dies during a take, the power sauce will be swapped to the BP-U battery seamlessly if it's in place?

A: The Wooden Camera Battery Slide Pro for Sony FX6 (V-Mount) acts as an AC adapter when in use and you cannot use BP-U batteries to hot-swap. For hot-swapping VMount batteries a sharkfin adapter is your best option.

Q: 2. Weight of this please?

A: This should weight right around 1 pound.

Q: 3. Will this fit Core NEO Mini batteries?

A: Yes, Gold mount is the same from different manufacturers.

Q: 4. Can you use this charger to charge 4 Dionic XT 90 Gold Mount 99Wh 14V?

A: The Anton Bauer GM4 Quad Micro Battery Charger can charge two regular-size Gold-Mount batteries.

Q: 5. Does it come with the cable to plug to the camera?

A: Yes, the cable is included.

Q: 6. What is the charging current on this model?

A: 1.5A

Q: 7. Will this work with the 26 volt V-Mount batteries like it does with the 14 volt ones...converting the output to 19.5 volts?

A: The Anton/Bauer Micro Battery Slide Pro for Sony FX6 (V-Mount) is designed to only work with 14V V-mount batteries.

Q: 8. What are the sizes of the two screws that secure the slide to the camera?

A: The screws that would be used to secure the Wooden Camera Battery Slide Pro for Sony FX6 (V-Mount) (B&H# WO283000) to the FX6 body appear to be M4 (i.e. 4mm metric) ones. The easiest way to tell that is to see if a standard 1/4" screw (used for mounting just about every type of non enormous camera to a tripod or quick release plate) is about the right size but doesn't thread properly after a couple of turns into the thread. (That should only be done very gently.) If so, that tap is indeed an M4 female thread. If the 1/4" screw is too large to fit in the tap at all then it's an M3 screw.

Q: 9. Can you use the HDMI port or does this block it?

A: The Anton/Bauer Micro Battery Slide Pro for Sony FX6 would not block any of the cameras video output ports.

Q: 10. Do they make one for the Sony FX9?

A: There is the Dual Micro Bracket for Sony FX9 from Anton Bauer. https://www.bhphotovideo.com/c/product/1627027-REG/anton_bauer_8375_0243_fx9_bracket_gm.html