The Swarovski Optik 5-25x52 dS P Gen II Digital Riflescope takes all the guesswork out of shooting to greatly improve your accuracy—when you're shooting anywhere between medium and extreme long range.

Packed into a conventional form factor, the scope features a wide zoom range and an oversized objective that allows you to use it for large and small game in all light conditions and keeps views bright and clear, even at long ranges. It comes with the full complement of optical coatings to maximize light transmission and keep the lenses clear and clean.

Beyond the optical performance you'd expect from a Swarovski riflescope, the dS is packed with a suite of electronics and tools to get you on target, starting with an integrated laser rangefinder and inclinometer. These measure the distance and relative angle from you to your target and, using low-power consumption Bluetooth connectivity, transmit that data to your smartphone running a companion app for iOS or Android devices. The app takes the distance and angle transmitted from the scope and adds information you've entered—such as your rifle and ammunition load, altitude, air pressure, wind speed, and temperature—and calculates an adjusted aiming point, which it transmits back to the scope. With this new aiming point determined, the illuminated aiming point on the reticle is moved to the appropriate position. Now, all you need to do is put the dot on your target and squeeze. At no point do you need to manually adjust your turrets, so your rifle remains properly zeroed at all times.

Protecting the optics and electronics is a large 40mm aluminum maintube and housing that is treated with a scratch-resistant anodized finish. The scope is nitrogen filled and O-ring sealed to be waterproof and submersible to 13 feet and resistant to internal fogging, even in extreme conditions and temperatures. Front objective filter threads allow you to install polarizing or specialty filters to further improve performance, while the included clear lens caps give you another level of protection with the ability to use the scope with them on. The illuminated reticle, rangefinder, inclinometer, and Bluetooth are powered by a single included CR123 battery.

Illuminated Reticle, 2nd Focal Plane    Automatically Adjusted Aiming Point    SWAROTOP, SWARODUR, SWAROCLEAN Coatings    Integrated Rangefinder and Inclinometer    33- to 1500 yd Metering,1 yd Accuracy    Bluetooth Connect to iOS/Android App    1/4 MOA Impact Point Correction    40mm Anodized Aluminum Maintube    Nitrogen Filled, Water and Fogproof    Runs on One Included CR123 Battery

• Wide 5-25x zoom range allows scope to be used at medium to extreme long range
• Large 52mm objective lens draws in copious amounts of light for use in all light conditions, from pre-dawn through dusk, and keeps view bright even when viewing small targets at very long range
• SWAROTOP internal lens coatings are index matched to the glass to reduce light loss to just 0.2%
• SWARODUR lens coating protects the external lenses from chemicals such as hand perspiration, condensation, gun oils, and insect repellents while offering scratch resistance
• SWAROCLEAN external lens coating makes it considerably easier to clean off insect repellents, watermarks, and other residue without leaving streaks
• Comfortable 3.74" eye relief
• 9.6-2.1mm exit pupil
• 21.9-4.5' field of view at 100 yd

• Modified 4A-I duplex reticle
• Designed for accuracy without obstructing view or target, even at long ranges
• Thick outer posts on horizontal and lower vertical axes draw the eye toward the center
• Thin hairs in center and upper vertical axes won't obstruct small targets
• Second focal plane placement maintains the reticle size through the zoom range
• Red illuminated aiming dot; placement changes based on calculations transmitted from app
• Illuminated aiming circle around center dot indicates when a measurement has been activated
• Reticle can be used with illumination turned off, but adjusted aiming point will not be displayed
• Free subtension dimensions program available at Swarovski Optik's website

• dS Configurator app for iOS (v8.1 and higher) or Android (v4.4 KitKat or higher) uses a variety of data to calculate precise shot placement for improved accuracy
• Customizable to specific rifle and ammunition load
• Utilizes range and angle to target, air pressure, and temperature to determine an adjusted aiming point
• No manual adjustment to windage or elevation turrets required, aiming point is automatically moved in the field of view
• Range and angle are automatically transmitted to app
• Additional data is entered on the dS Configurator app and the calculated ballistic curve is transferred directly to the scope via Bluetooth connectivity
• Adaptive system adjusts aiming point if magnification is turned up or down

• Class 1 eye-safe IR laser
• Integrated rangefinder accurately ranges distance to target
• Built-in inclinometer measures upward or downward angle to target up to ±60°
• 33-1500 yd metering distance with ±1 yd/m ranging accuracy
• ≤ 0.7 seconds measuring time
• Maximum aiming correction range 1120 yards (1024m)
• Display distance in yards or meters

• Monochrome Liquid Crystal on Silicon (LCoS) display shows information clearly without distorting view
• Selectable 40/60/80 second display time, configurable through the companion app
• Pitch rifle/scope side-to-side 20° to override and reset the display timer without having to take another measurement
• 64 brightness levels for use in all light conditions
• 1/4 MOA impact point correction enables precise zeroing
• Inset and covered windage and elevation turrets; used primarily for zeroing scope to rifle
• -3 to +2 diopter allows reticle and in-view display to be perfectly focused
• Parallax adjustment from 55 yd to infinity
• Separate brightness + and - control buttons for easy adjustment
• Single button activates rangefinder function
• Low battery indicator when an estimated 100 measurements are still possible
• LED Bluetooth indication light

• Swarovski Rail no-ring mounting system (requires base adapters)
• 40mm maintube
• Lightweight and durable aluminum alloy
• Scratch-resistant anodized finish
• Nitrogen filled to be fogproof when moving through extreme changes in temperature and environmental conditions
• Waterproof to 13' or 0.4 bar of pressure, able to withstand brief submersion in puddles/streams or use in driving rain
• M63 x 0.75 objective filter threads
• Protective front and rear transparent lens covers
• Broad 14 to 131°F operating temperature
• Torx wrench and adjustment tool stored in battery compartment for easy access in the field
• Runs on one included CR123 battery (rechargeable batteries should not be used)

Related Questions and Answers

Q: 1. can you do video editing with these?

A: You can use the ProGrade Card Reader to copy video footage from an SD card to a computer's internal drive or a suitable external drive. SD cards are not designed to be edited off of directly.

Q: 2. My imac and macbook pro are USB2 which one is faster? Apple SD Internal Slot macbook mid 2011 or ProGrade Digital?

A: The now-aging USB 2.0 standard can theoretically transfer data at 480mbps (60MBps). The newer USB 3.0 can handle up to 5gbps (640MBps)—over ten times as fast as the 2.0 maximum. How fast can a Mac read or write to a SD card in its SD card slot? Mac notebooks (laptops) use the USB bus to communicate with the SD card slot. They have a maximum speed of up to 480Mbit/s. Mac desktops use the PCIe bus to communicate with the SD card slot. Desktops can transfer data at a faster rate. Check the packaging that came with your SD media to determine the maximum transfer rate that your specific card uses. To determine the maximum transfer speed of your Mac, you can use System Information. Choose Apple () menu About This Mac and then click System Report. If you use a Mac notebook: 1. Select Hardware, then select USB. 2. Select Internal Memory Card Reader and look for the Speed entry. If you use a Mac desktop computer: 1. Select Hardware, then select Card Reader.  2. Look for the Link Speed entry. Computers that use the PCIe bus express their speed as GT/s. Excerpt from: https://support.apple.com/en-us/HT204384

Q: 3. Can I safely stack 2 magnetic Prograde card readers?

A: You can place one ProGrade Digital Dual-Slot UHS-II SDXC USB 3.2 Gen 2 Type-C Card Reader over another but the magnet is only in the bottom, not the top.

Q: 4. What’s the fastest copying speeds have you got from the card reader?

A: Hi Mahmood, Thanks for reaching out about the speeds of our readers. Our readers are USB 3.1 Gen 2 and when plugged into a USB 3.1 Gen 2 host you can download at 1.25GB/s so you can download from both cards simultaneously at full speed. For example with our CFast/SD reader the CFast will transfer at 550MB/s and the SD V90 card will transfer at 250MB/s and both of those can transfer at the same time. Let us know if we can clarify any further. - ProGrade Digital

Q: 5. Is this the fastest card reader for the UHS-II SDXC V90 memory card for a 2019 Mac Pro?

A: This is the fastest possible reader to use for UHS-II SDXC V90 cards for download to a 2019 Macbook Pro.

Q: 6. Do the cards stick out or do they click in all the way?

A: Memory cards are not fully inserted, part of the memory card stick out of the reader.

Q: 7. is this whole card reader's outter shell is made of Metal or Plastic?

A: This reader is comprised of plastic but you can attach it to any metal surface via the installed magnet at the bottom.

Q: 8. i don't see any details on the cord: wondering if one is supplied, and more importantly, what length?

A: Yes there are two cables in the box USB Type-C to Type-C Cable (18" / 45.7cm) USB Type-C to Type-A Cable (18" / 45.7cm)

Q: 9. Will the CF 2.0 read CF1.1 and 1 cards???like the Xcellon says it does. As I am using MacBook Pro with all thunderbolt 3 ports only. As shooting with the canon 1dxmk2

A: This is SD reader , you need CF and CFast reader B&H # LERWCR1TBNA and BH #LELRW400CRBN

Q: 10. Do either of the supplied cables support USB 3.1 Gen 2 speeds?

A: Yes, both do.