The NP-65 QD Plate from Leofoto is an Arca-type quick release plate that doubles as a convenient strap mounting plate for traditional hand straps and QD Quick Disconnect straps and harnesses. This aluminum plate features an upgraded 1/4"-20 camera mounting screw with a thicker head and wider D shaft. The rubberized top surface prevents the camera from twisting on the plate without marring its surface. Two removable safety screws prevent the plate from releasing from a compatible quick release clamp prematurely.

Arca-Type Quick Release Plate    For Leofoto SP-Series and Magpul Straps    Integrated Strap Loop    QD Quick Disconnect Steel System Port    1/4"-20 Camera Screw with D-Ring    2x Safety Release Screw    Rubberized Base for Traction    Weight: 1.7 oz

Related Questions and Answers

Q: 1. After the base is leveled, is it possible to pan 360 degrees without the ballhead flopping around. I only see one knob for the ballhead...and one for the leveling base. What am I missing?

A: While there is only one knob to control the ball head and the panning on the LH-25, that knob is friction controlled so you only need to loosen it slightly to pan the head without movement from the ball sphere.

Q: 2. What is important to consider when looking at different size ball heads? For ex, why choose a 40mm over a 30mm or 50mm?

A: The size of the ball, actually the base corresponds with the tripod base. For example if you have a travel tripod or a smaller size tripod, then a 20mm or 30mm would be a good fit. A large tripod dictates a 40 or 50mm ball head.

Q: 3. will this work with the Gitzo traveler 1 series?

A: Yes Gitzo tripods have a 3/8" screw so Leofoto LH-40 ball head will work.

Q: 4. There's no "In the Box" for this. I think the head includes an Arca camera plate. Then when I put one in the cart, they ask, "do you want a camera plate?" Just enough uncertainty to make me buy a second camera plate or not buy. Can somebody confirm that I get a ball head and a plate for my $186?

A: Leofoto LH-55 Low-Profile Ball Head with Quick Release Plate (Black) includes a quick release plate in the box.

Q: 5. Does this Ball head panning lock down separate from the ball so i can adjust and level ball head with out the base moving with it?

A: Yes it does.

Q: 6. How doe the LH-40 compare to the LH-30 for loads of 4-5 lbs, such as a FF camera and a 24-70/2.8?

A: Either will work but the LH-40 has a much higher load capacity and would be more suitable for your setup.

Q: 7. Will this work with an ifootage monopod cobra 180?

A: Yes. With no problem the following ball-head will attach.

Q: 8. Does it come with a quick release plate?

A: Yes, it comes with a quick release plate.

Q: 9. Leofoto's site says this has support wt. of 15kg, 33lb. Why does your site say 13.2lb?

A: According to the manufacturer, the maximum load capacity of the Leofoto LH-30 Ball Head with Quick Release Plate is 33.1 lb (15 kg). Our website should be updated & corrected to reflect this information shortly.

Q: 10. What is the diameter of the base?

A: The Leofoto LH-30 Ball Head with Quick Release Plate base diameter is 1.85" (4.7 cm).