Designed for outdoor floor and wall graphics, the Polar Street FX Outdoor Aluminum Floor and Wall Material from Drytac is a textured white aluminum media. Offered here in a 48" x 98' roll, this slip-resistant material has been specifically developed for rough ground or wall surfaces such as brick, concrete, asphalt, or any other low energy surfaces. Coated on one side with a clear, high-tack adhesive, this textured film is receptive to high quality graphics. The material is resistant to scuffing and high traffic, making it ideal for public environments. Polar Street FX can also be used for exterior and interior wall wraps and graphics as it can form and adhere to rough surfaces.

Textured White Aluminum    For Indoor and Outdoor Use    Matte Finish    High Tack Permanent Adhesive

Related Questions and Answers

Q: 1. As Scotch has stopped making is repositionable mounting adhesive 568 will this be an appropriate replacement?

A: The Drytac MultiTac Permanent High-Tack Acrylic Mounting Adhesive is permanent and not repositionable.

Q: 2. Will this item go through X-ray machine during the shipping process? Also, will there be an unpacking inspection process for the shipping process? Because I'm afraid that there will be any pollution and photosensitive problems.

A: It is not routine for packages to be X-rayed and packages will be labeled as being sensitive to X-rays.

Q: 3. Is this product archival?

A: The manufacturer does not indicate that the Drytac MultiTac Pressure-Sensitive Mounting Adhesive (41" x 150' Roll, 1 mil, Clear) is archival. They do state that when all layers are compatible, the bond will not deteriorate and will last for many years, but it depends on how well all the assembled layers "like" each other. The Drytac MultiTac Pressure-Sensitive Mounting Adhesive (41" x 150' Roll, 1 mil, Clear) has an adhesive pH of 6. MTAC adhesive is used in both short term and long-term applications, where a high tack adhesive is required. The acrylic-based adhesive used in this build is non-yellowing and stable with excellent aging when properly applied to compatible surfaces.

Q: 4. how do i use this product?all i get are bubbles

A: The Drytac MultiTac Permanent High-Tack Acrylic Mounting Adhesive (White, 25.5" x 150' Roll) is pressure sensitive and would need a roller unit such as this the Dry Lam Fujipla 25" Roller Laminator: https://bhpho.to/3Xxe6wI.

Q: 5. Does this device have pan option?

A: It does not.

Q: 6. How many pins is the connector on the slider? Are they all connectors for motors?

A: The GVM Professional Video Aluminum Alloy Motorized Camera Slider (32") uses a 4-pin connection to control the motor with the remote.

Q: 7. Is this product suitable to affix photographs to MDF using a cold roller ?

A: The Drytac MultiTac White Permanent High-Tack Acrylic Mounting Adhesive is good for affixing a photograph to a medium-density fiberboard using a cold roller.

Q: 8. How do you attach this to drywall without permanently damaging the wall?

A: The Primacoustic EcoScapes Slat Wall does permanently attach to the wall either with glue or screws, so the installation will damage the wall. If you do plan on removing the panels at a later date, the holes from screws may be easiest to touch up compared to the glue. Here is a link with the installation instructions: https://www.bhphotovideo.com/lit_files/991195.pdf

Q: 9. Can you digitally print on this paper?

A: No, the Lineco Glassine Roll cannot be printed on.

Q: 10. Does this Plus Thermal Paper also suitable for model of Plus BoardFax BF-030W?

A: Thermal Paper for the BF-030, BF-041 and BF-035 Copyboards from Plus America. It will work with the BF-030W model as well.