The FRC-24-TB Replacement LED Tube for the Forever Ready Cool FRC-24-LCD from Impact is a daylight-balanced LED tube that boasts 97.2 CRI and 98 TLCI and delivers spectacular color rendering, whether it's product photography in the studio or a fashion shoot on location. The LED tube supplies flicker-free light for video that will prevent strobing, even when shooting at high frame rates. The cool-running FRC-24-TB replacement installs in seconds, without the need to stop a shoot or interrupt your workflow.

Color Temperature: 5600K, Daylight    CRI: 97.2    TLCI: 98    LED Chip Type: COB

Related Questions and Answers

Q: 1. Could this light be mounted on the wall with a baby pin or other option?

A: You could use a Impact wall plate to mount this to a wall.

Q: 2. what is this? recreation? Old New Stock

A: The Telefunken VF14K Replacement Tube is a brand new replacement for the original VF14M or VF14 vacuum tube that was used in the original Neumann and Telefunken U47 and U48 large diaphragm microphone models. The VF14K tube is designed to fit directly into the tube socket of a U47 or U48 mic made by Neumann or Telefunken, and without the need for any modifications.

Q: 3. do theses cases stack easily?.. do they lock together when stacked so the top one doesn't slide around?

A: The Gator Roto-Molded LCD/LED Screen Case with Wheels (40 to 45") is not designed to be stacked. Stacking could damage the screen inside.

Q: 4. Will this fit the LG UltraFine 4K Display of 2020?

A: Unfortunately the LG UltraFine 24MD4KL-B 24" is slightly too large for this case. The next size up would be recommended for best fit, Gator Cases Roto-Molded LCD/LED Screen Case (27 to 32") (SKU: GAGLED2732RO) https://www.bhphotovideo.com/c/product/1380349-REG/gator_cases_gled2732roto_rotationally_molded_case_for.html/specs

Q: 5. will this work with my old compact 600R ? It looks the same...

A: The Profoto Flashtube, 600 Watt/Seconds, UV Coated - for ComPactPlus Monolight, B&H # PRFTUVCPP • MFR # 331511, was the correct flash tube for use with the older Profoto ComPact-R 600 Monolight strobes. Unfortunately, both the strobes and the flash tubes were discontinued around 2010 and are no longer available for purchase. None of the current Profoto flash tubes would be compatible with the older Profoto ComPact 600 monolights, and there are no recommendations for third-party flash tubes for use with this unit. Profoto does not recommend using any flashtubes other than the one that the unit was designed around. Using another flashtube could have adverse affects on the units power board and potentially cause failures.

Q: 6. What is the fc output of the tube as measured at three feet directly in front of the tube?

A: According to the manufacturer the output would be 750Lux @ 1m.

Q: 7. Does this work with Neewer i6t ex strobe?

A: Flash tubes are model specific. This one is for the Impact Venture.

Q: 8. How do you know if you need to replace the light (tube) my firing is getting less consistent. Or will the thing just stop working all together? It's pretty pricey and I don't want to have to buy a new one if this isn't the case.

A: The flash tube needs to be replaced when you are getting no flash out of the Profoto head. Tubes can easily be replaced by a plug and play procedure.

Q: 9. Would this work as a replacement for the Kino Flo True Match Lamp?

A: No. Please review the following compatible bulbs. https://bhpho.to/3rume1n

Q: 10. Can this light be used vertically? If so, what sort of clamp would be needed?

A: Due the 5/8" receiver bolted into the yoke of this Impact Forever Ready Cool 4-LED Tube Light Panel, it cannot be mounted vertically. However, you may add the Impact Heavy-Duty Swivel Pin, BH # IMSRP118 which can be placed at a right angle in order to position this fixture vertically. https://bhpho.to/3NBsOdO