Transmit two HDMI sources to one HDBaseT device using the Key Digital UHD 4K HDMI 2x1 Presentation Switcher and HDBaseT Transmitter. It also features two USB Type-A connectors for integrating a USB 2.0 device like a webcam or keyboard and provides 5V and 500mA of power. A USB Type-B connects a host, like a personal computer, to the device. UHD 4K video can be transmitted over 328' and 1080p over 492' with compatible Cat cable.

One HDMI pass-through output allows you to add another display closer to the unit to monitor your sources. Both analog and digital audio outputs can de-embed audio from input sources. Control for the transmitter can be achieved via the bidirectional IR and RS-232 ports, via TCP/IP, or the onboard buttons. LED indicators show the connection status of your sources and power status of the unit. A micro-USB input provides easy access for firmware updates.

2 x HDMI Inputs, 1 x HDBaseT Output    UHD 4K up to 328'    USB Host and Device Ports    Analog and Digital Audio Outputs    HDCP 2.2 and EDID Support    HDMI Pass-Through    Bidirectional IR and RS-232 Control    TCP/IP, Front-Panel Buttons    LED Indicators    Micro-USB for Firmware Update

• Native integration with Key Digital X100Rx, HDBaseT Rx, or UPS52U presentation switchers
• Supports HDCP 2.2 and EDID management with 15 internal handshakes
• USB host and device ports create connectivity hub for professional USB cameras and microphones, audio DSP, keyboard, mouse, or touchscreen display with connected computer
• Add Key Digital CX800 to build programming-free automation system for room display on/off, screen display, PTZ camera control, and AMP220 integration
• Audio can be returned from connected display or receiver unit and output on external analog and digital outputs
• 10G pass-through mode enables uncompressed 10.2 Gb/s signal extension
• Automatic selection of newly detected source and switching from newly disconnected source when auto-switching enabled
• Network scan and detect populates pre-built GUI including connected display and projector controls via CEC manager
• Power over HDBaseT via RX and presentation switch unit
• UHD 4K up to 328', 1080p up to 492'

• Long range mode extends 1080p signals up to 500' using Cat 5e/6 cable
• Full buffer system manages TMDS re-clocking and signal regeneration, HDCP authentication to source and display, EDID control handshake, and hot plug detection voltage
• Bidirectional IR and RS-232 control
• Control via onboard buttons and TCP/IP

Related Questions and Answers

Q: 1. does the signal hold on an inactive port? meaning if I have a computer connected to input 1, and I switch to input 2, does the computer on input 1 think that it has lost the connection?

A: We are not sure of the process but we know that you do not lose the signal and that you can switch back and forth at any time.

Q: 2. what is the output resolution?

A: The output resolution is the same as the input resolution.

Q: 3. Does this unit have auto-switching?

A: It does not auto-switch for any of the components I have. My alternative is to use the Logitech Harmony Elite Remote in order to switch the inputs in conjunction with the components currently in use. It does take a little customization on the input commands, but it works very well.

Q: 4. Is it working with sony bravia 48 inch tv?

A: Yes

Q: 5. Does this have HDMI 2?

A: Yes it does, this has HDMI 2.0 connections.

Q: 6. Can you set this to fade between video inputs?

A: That is not possible. This is a basic AV switcher. You would need a production switcher to be able to fade between inputs. The Blackmagic Design ATEM Mini HDMI Live Stream Switcher is a great starting option for that, BH #BLSWATEMMIN. https://bhpho.to/2VuTdCS

Q: 7. Is the tearing a quick dip to black, blue or distortion effect on black?

A: IOGEAR says : Thank you for choosing IOGEAR and we apologize for the inconvenience. To better service you and understand your set up, please feel to contact our customer support at 1-866-946-4327 or email us: support@iogear.com. Once again, thank you for choosing IOGEAR.

Q: 8. I understand the "Mute" button on the front of the unit mutes the audio output. Can this button also be configured to blank the video like the "Blank" button on other models?

A: The mute button on the Kramer VP-550X is not programable to other functions.

Q: 9. Does this switcher work with apple TV units? The switcher I currently have does not and I have to plug the apple TV directly into my TV's HDMI port.

A: This switcher is HDCP Compliant, it should work with an Apple TV.

Q: 10. Does it support 4k@60 4:2:0 10 bit color space?

A: The spec for this is 4Kx2K @60Hz with 12bit YCBCR 4:2:0.