This white Shure MX395 Microflex is figure-8 boundary microphone designed to capture high-quality speech and voice for sound reinforcement and teleconferencing installations in governmental, institutional, religious, and business settings.

The MX395 can be permanently installed on conference tables, desks, or lecterns using the included mounting hardware. Its low-profile design is only 1" in diameter and extends just 0.8" above the mounting surface, ideal for boardrooms and other sites where minimal mic visibility is of high priority and aesthetics are important.

This version of the MX395 features figure-8 polar pattern best used when two people are seated facing each other for interview-style speech capture. The mic takes advantage of the boundary effect to capture clear speech with reduced room ambience for intelligibility. A built-in, low-cut filter can be used to attenuate low-frequency table noise that can muddy your sound.

Designed with proprietary CommShield technology, the MX395 resists interference from devices such as cell phones and two-way communication devices.

The MX395 is equipped with a 3-pin XLR connector and requires 11 to 52V phantom to operate.

For Speech and Vocal Capture    Low-Visibility Design    Figure-8 Polar Pattern    Resists Cell Phone Interference

Related Questions and Answers

Q: 1. Are the knobs on the LH-36 metal or plastic?

A: The Leofoto LH-36 knobs are metal.

Q: 2. What kind of automatic mixer works with this mic?

A: You can use any of the Shure automatic mixers such as the SCM410 4-Channel Automatic Mixer (B&H# SHSCM410), SCM810 8-Channel Automatic Mixer (B&H# SHSCM810) or SCM820 8-Channel Digital IntelliMix Automatic Mixer (B&H# SHSCM820). All are compatible with the MX395 Microflex Boundary Microphone.

Q: 3. I have a 2017 ThinkStation P310, 250W power supply, 32 GB RAM, latest Windows 10. GPU is NVIDIA K620. Is this T1000 compatible?

A: Yes, the PNY NVIDIA T1000 Low-Profile Graphics Card, B&H # PNCNT10008GB, is compatible with the 2017 ThinkStation P310.

Q: 4. Will this mic survive water being splashed on it?

A: Shure does not rate the MX395 Microflex Low-Profile Boundary Microphone models for water resistance. This will probably withstand one or two accidents or water spills, but I would not recommend installing it in an environment where that will happen frequently. If the microphone does get wet, it would be best to wipe it dry as soon as possible. Repeated exposure to spills or splashes will damage the microphone. For conference rooms where water spills are more likely, using a hanging mic like this suspended over the table could be less likely to suffer damage from accidents: https://bhpho.to/2xVQp7s

Q: 5. Will this card fit in the sonnet Sel tb3

A: No, the PNY Technologies T1000 Low-Profile Graphics Card is not compatible with the Sonnet Sel TB3. Please check the manufacture's link below for compatible devices. https://www.sonnettech.com/support/downloads/manuals/TB_PCIe_Card_Compatibility.pdf

Q: 6. Does this microphone have Automatic Gain Control?

A: This microphone does not offer an AGC. Gain levels are adjusted manually.

Q: 7. What are the cable's connections?

A: The MX396 is supplied without a connector. Typically, an installer will use phoenix block-type connectors or XLR connectors on the cable. It is OK to separate the cable wires out to three separate XLR connectors.

Q: 8. Is it the same item as it is describe in your site?Do you ship this item to a FPO, AP address?Thanks!

A: The product we ship is the same product as described above. We will be happy to ship this microphone to an FPO, AP address for you.

Q: 9. What is the connection type from the arm to the C Clamp? This clamp is too small for my desk. I'd like to use the Neewer ST-CCD1

A: The connection type from the arm to the C-clamp of the Neewer Low-Profile Desk-Mount Boom Arm for Microphone (BH # NE66602458) is not specified. It is not compatible with the NEEWER ST-CCD1 Heavy Duty C Desk Clamp.

Q: 10. will sunwayfoto L Bracket fit Pnl-D750R-L on Leofoto LH-36 ball head ?

A: Yes, that L bracket will fit on this ballhead.