You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Shure Mx395 Microflex Low-profile Cardioid Boundary Microphone For Installs (white)

Shure Mx395 Microflex Low-profile Cardioid Boundary Microphone For Installs (white)
  • Product Code: ga93403
  • Availability: In Stock

$633.00 $772.26

This white Shure MX395 Microflex is a cardioid boundary microphone designed to capture high-quality speech and voice for sound-reinforcement and teleconferencing installations in governmental, institutional, religious, and business settings.

The MX395 can be permanently installed on conference tables, desks, or lecterns using the included mounting hardware. Its low-profile design is only 1" in diameter and extends just 0.8" above the mounting surface, ideal for boardrooms and other sites where minimal mic visibility is of high priority and aesthetics are important.

This version of the MX395 features a cardioid polar pattern best used for a single person or two people sitting side by side. The mic takes advantage of the boundary effect to capture clear speech with reduced room ambience for intelligibility. A built-in, low-cut filter can be used to attenuate low-frequency table noise that can muddy your sound.

Designed with proprietary CommShield technology, the MX395 resists interference from devices such as cell phones and two-way communication devices.

The MX395 is equipped with a 3-pin XLR connector and requires 11 to 52V phantom to operate.

For Speech and Vocal Capture    Low-Visibility Design    Cardioid Polar Pattern    Resists Cell Phone Interference

Key Specs
Element TypeElectret Condenser
Polar PatternCardioid
ControlsLow Cut/HPF
Frequency Response50 Hz to 17 kHz
Maximum SPL121 dB
Analog Output1x XLR 3-Pin Male
Power SourcesPhantom Power
Microphone
Sound FieldMono
Element TypeElectret Condenser
Polar PatternCardioid
OrientationN/A to Boundary Mics
CircuitrySolid-State
High-Pass Filter150 Hz, 6 dB/Octave
Filter & EQLow-Cut Filter: 150 Hz, 6 dB/Octave
ControlsLow Cut/HPF
Performance
Frequency Response50 Hz to 17 kHz
Maximum SPL121 dB
Dynamic Range93 dB
Equivalent Noise Level28 dB (A-Weighted)
Connectivity
Analog Output1x XLR 3-Pin Male
Power
Power SourcesPhantom Power
Operating Voltage11 to 52 V (Phantom Power)
Physical
ColorBlack
Dimensionsø: 1.26H: 4.02" / ø: 32H: 102 mm
Weight0.3 lb / 136 g

Related Questions and Answers

Q: 1. What is the thread on the outside of this microphone? I'm working to create a custom mount for a pair of them and would like to find suitable hardware to mount them.

A: Shure lists the thread size as 7/8"-14 UNF-2B. All relevant installation dimensions for the MX395 are provided by Shure here: http://service.shure.com/s/article/mx395-installation-dimensions?language=en_US You can find additional information in the user manual which also includes a diagram showing all measurements of the mic on page 11 (use the page numbers printed on the pages, not the pdf page numbers): http://www.bhphotovideo.com/lit_files/89562.pdf

Q: 2. Is it the same item as it is describe in your site?Do you ship this item to a FPO, AP address?Thanks!

A: The product we ship is the same product as described above. We will be happy to ship this microphone to an FPO, AP address for you.

Q: 3. Hi, is A27M Stereo Microphone Adapter included in this set?

A: Yes It was included in the one that I bought.

Q: 4. Where are these made?

A: These are made in Mexico.

Q: 5. Does it come with a plate or I should purchase this sparately?

A: It does not come with the plate. It would need to be purchased separately.

Q: 6. How about feedback? Does it get much feedback?

A: No, the PGA58 is not prone to feedback. Its cardioid polar pattern focuses on the user's voice while rejecting unwanted background noise and delivers a clear and natural tone.

Q: 7. Does it need phanton power to work?

A: No, phantom power is not needed for dynamic microphones like the Shure 55SH.

Q: 8. Will this card fit in the sonnet Sel tb3

A: No, the PNY Technologies T1000 Low-Profile Graphics Card is not compatible with the Sonnet Sel TB3. Please check the manufacture's link below for compatible devices. https://www.sonnettech.com/support/downloads/manuals/TB_PCIe_Card_Compatibility.pdf

Q: 9. What are the cable's connections?

A: The MX396 is supplied without a connector. Typically, an installer will use phoenix block-type connectors or XLR connectors on the cable. It is OK to separate the cable wires out to three separate XLR connectors.

Q: 10. Will this mic survive water being splashed on it?

A: Shure does not rate the MX395 Microflex Low-Profile Boundary Microphone models for water resistance. This will probably withstand one or two accidents or water spills, but I would not recommend installing it in an environment where that will happen frequently. If the microphone does get wet, it would be best to wipe it dry as soon as possible. Repeated exposure to spills or splashes will damage the microphone. For conference rooms where water spills are more likely, using a hanging mic like this suspended over the table could be less likely to suffer damage from accidents: https://bhpho.to/2xVQp7s

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Shure Mx396/c Dual-element Boundary Microphone

$1,503.00 $2,269.53

Shure Beta 91a Boundary Microphone

$597.00 $835.80

Shure Mxw6 Cardioid Boundary Transmitter (black)

$2,121.00 $2,905.77

Lenovo 15.6" Thinkpad L15 G4 Notebook

$3,760.95 $5,791.86

Products You May Like

Ewa-marine U-bz Underwater Housing

$1,120.95 $1,513.28

Epson T366 Ink Maintenance Box T366100

$29.97 $39.26

Tiffen 2 X 2" Clear Uncoated Filter

$194.85 $233.82

Lewitt Lct 240 Pro Vocal Set

$417.00 $517.08

Anker 45w Usb-c Pd Wall Charger

$89.97 $135.85