The WiMi5200A Wireless 3G-SDI H.264 Encoder/Transmitter from Nimbus pairs with an optional WiMi5200A receiver as a point-to-point Wi-Fi transmission system with a 4921' range and only 30ms latency. With both units featuring built-in 5 GHz Wi-Fi, no additional network connection is required. The transmitter encodes and sends up to a 1080p60 SDI signal as an H.264 encoded signal, and the receiver decodes and outputs it as video.

The WiMi5200A transmitter features a 3G/HD/SD-SDI input and 3G/HD/SD-SDI loop output. It offers a 1/4"-20 mounting thread on the bottom and comes with an L-series battery plate for on-camera portable operation. It also offers a 2-pin LEMO power connector for continuous power. Batteries and power adapters are sold separately.

1 x 3G-SDI Transmitter/Encoder    1 x 3G-SDI Receiver/Decoder    1 x WiMi1000 Wireless AP Repeater    4921' Range via 5 GHz, Extends to 9000'    Transmit up to 1080p60 Video    L-Series Battery Plates, Power Adapters

• 4921' range over 5 GHz Wi-Fi

• 30ms latency

• Encodes and sends up to a 1080p60 SDI signal in H.264 MPEG-4 Parts 10: AVC (decoded by optional receiver)

• 3G/HD/SD-SDI input and loop output

• Baseline profile with level 4.2

• DIP switch selection of Wi-Fi frequency and encoding rate

• USB firmware update port

• 1/4"-20 mounting thread

• L-series battery plate included

• 2-pin LEMO power input

Related Questions and Answers

Q: 1. Can this Unit convert SDI input in TX to HDMI output in RX ?

A: The Shimbol ZO600S SDI & HDMI Wireless Video Transmission System does not list cross conversion between HDMI and SDI.

Q: 2. What's the distance can it go

A: This has up to a 400 foot range.

Q: 3. We record the BMPCC 6k into the ATEM Mini (1080p) via HDMI. Would you recommend it to make the recording wireless? Quality?

A: In this price range the Accsoon CineView HE is very reliable, and the video/audio quality is quite good. The CineView HE would work with the Black Magic Pocket camera 6K's HDMI output.

Q: 4. Does it transmit Start \ Stop trigger via SDI?

A: The Lilliput WS500 Wireless Video Transmission System can control Start / Stop functionality exclusively from the App controls: "App Display Controls Use the Lilliput app to adjust controls like focus peaking, exposure, zoom, markers, and start/stop recording"

Q: 5. What happens if you try to send a 4k 60p signal (such as from an a7siii) through the transmitter? Does it come through as 30p?

A: The input format of 4k 60p is not supported. It must be one of the supported input formats - UHD 4K: 30/29.97/25/24/23.98 when using the Hollyland Pyro S 4K HDMI/SDI Wireless Video Transmission System.

Q: 6. Does the app support two (or more) video signals simultaneously? I.E. can a director view multiple camera feeds at once via the app?

A: No, The Hollyland App for the Accsoon CineView SE or any other Hollyland wireless solution would only support a single input ( Camera) signal.

Q: 7. Can the USB C output be used with a USB C monitor?

A: The USB-C output on the Accsoon CineView HE Extra Receiver is a UVC webcam output. It does not support DisplayPort signal output that would allow connection to a monitor. You could use an SDI to HDMI converter and output from the SDI port on the Accsoon Receiver.

Q: 8. The first paragraph states less than 1ms latency, a few lines later it states 80ms latency. Can you confirm the latency of the ZO600S and whether it would be appropriate for focus pulling?

A: The latency of the Shimbol ZO600S SDI & HDMI Wireless Video Transmission System is around 80 ms, we would not recommend using this system for focus pulling.

Q: 9. Can I input HDMI and output SDI or vice verça?

A: No, the Lilliput WS500 Wireless Video Transmission System does not have a HDMI to SDI cross conversion function. SDI signals would only output from SDI. HDMI would only output from the HDMI port.

Q: 10. the latency please ?

A: The SWIT CURVE500 HDMI Wireless Video Transmission System has a latency of less than 50ms.