The WiMi5200 Wireless 3G-SDI H.264 Encoder/Transmitter from Nimbus pairs with an optional WiMi5200 receiver as a point-to-point Wi-Fi transmission system with a 1968' range and only 30ms latency. With both units featuring built-in 5 GHz Wi-Fi, no additional network connection is required. The transmitter encodes and sends up to a 1080p60 SDI signal as an H.264 encoded signal, and the receiver decodes and outputs it as video.

The WiMi5200 transmitter features a 3G/HD/SD-SDI input and 3G/HD/SD-SDI loop output. It offers a 1/4"-20 mounting thread on the bottom and comes with an L-series battery plate for on-camera portable operation. It also offers a 2-pin LEMO power connector for continuous power. Batteries and power adapters are sold separately.

1 x 3G-SDI Transmitter/Encoder    1 x 3G-SDI Receiver/Decoder    WiMi1000 Wireless AP Repeater    1968' Range via 5 GHz, Extends to 6000'    Transmit up to 1080p60 Video    L-Series Battery Plates, Power Adapters

• 1968' range over 5 GHz Wi-Fi

• 30ms latency

• Encodes and sends up to a 1080p60 SDI signal in H.264 MPEG-4 Parts 10: AVC (decoded by optional receiver)

• 3G/HD/SD-SDI input and loop output

• Baseline profile with level 4.2

• DIP switch selection of Wi-Fi frequency and encoding rate

• USB firmware update port

• 1/4"-20 mounting thread

• L-series battery plate included

• 2-pin LEMO power input

Related Questions and Answers

Q: 1. What kind of compression does this use, and what is the bitrate?

A: According to Hollyland their code rate is 8M-10M.

Q: 2. what is the exact battery size for this item ?

A: The Shimbol TP Mini 600' HDMI Wireless Video Transmission System is compatible with L-series style batteries such as the Genaray 2 x NP-F770 4400mAh Batteries & 2 x Compact Chargers Kit, BH #GENPF770CS.

Q: 3. Can two or three sets be used simultaneous for multi camera setups?

A: Shimbol does not state if multiple sets of the Shimbol TP Mini 600' HDMI Wireless Video Transmission System can be used in the same area. You may be able to use multiple sets, but there will be the possibility of interference when doing so.

Q: 4. Can I input HDMI and output SDI or vice verça?

A: No, the Lilliput WS500 Wireless Video Transmission System does not have a HDMI to SDI cross conversion function. SDI signals would only output from SDI. HDMI would only output from the HDMI port.

Q: 5. What happens if you try to send a 4k 60p signal (such as from an a7siii) through the transmitter? Does it come through as 30p?

A: The input format of 4k 60p is not supported. It must be one of the supported input formats - UHD 4K: 30/29.97/25/24/23.98 when using the Hollyland Pyro S 4K HDMI/SDI Wireless Video Transmission System.

Q: 6. Can you only buy transmitter and pair with phone/tablet without purchase the receiver?

A: Yes, the Accsoon CineView HE Multi-Spectrum Wireless Video Transmitter will allow you to view on up to four tablets or phones directly, without needing to purchase the Accsoon CineView HE Receiver.

Q: 7. Can this be powered externally? If so, how? USB, plug...?

A: The Hollyland Mars 400 Dual HDMI wireless set can be externally powered by its included DC Power Adapter or with an optional D-tap adapter (SKU: HOMARSDTAPDC). The USB is listed as use for firmware upgrades.

Q: 8. Can this link a smartphone running Snapbridge to a Nikon Z8?

A: No, the smartphone link feature for the Accsoon CineView HE Multi-Spectrum Wireless Video Transmitter is intended to work with the Accsoon Go viewer app, for live video monitoring.

Q: 9. the latency please ?

A: The SWIT CURVE500 HDMI Wireless Video Transmission System has a latency of less than 50ms.

Q: 10. We record the BMPCC 6k into the ATEM Mini (1080p) via HDMI. Would you recommend it to make the recording wireless? Quality?

A: In this price range the Accsoon CineView HE is very reliable, and the video/audio quality is quite good. The CineView HE would work with the Black Magic Pocket camera 6K's HDMI output.