Mount your 26 to 55" display nearly flush to the wall with the Mustang MPF-M44U Flat Wall Mount. It holds your display just 1.2" from the wall to provide a sleek-looking installation. The open wall plate design lets you easily route cables through the wall to the display for a neat look. If your beams are off-center from where you want your display, you can slide it along the wall plate, depending on your display's hole spacing. The MPF-M44U is suitable for use in home theaters, offices, classrooms, and more.

Supports 26 to 55" Displays up to 150 lb    Up to 400 x 400mm VESA Pattern Support    Post-Installation Lateral Shift    Holds Display Just 1.2" from Wall    Open Wall Plate for Cable Management

• Universal design
• VESA compatible
• Low-profile, holds display close to wall for a clean look
• Open wall plate allows easy access for wiring
• Lateral shift for perfect placement (depending on your display's hole spacing)
• Depth micro-adjustment varies by display
• Pre-sorted hardware pack for easy installation to wood studs or concrete surfaces included
• Pre-installed security screws help you install your display quickly and easily
• Built-in kickstand holds your display away from the wall for easy cord installation
• Orientation varies by display
• Cold-rolled steel construction
• Scratch-resistant epoxy powder coat

Related Questions and Answers

Q: 1. Is it possible to use this for a Dell U2417H 24 16:9 IPS Monitor that has VESA 100x100?

A: Technically it should work but the TV plate may be a bit large and cover some inputs. If everything is wired up before you install the plate on the monitor then it should work well. Feel free to contact us directly using the support button on our website if you need help with anything else, thanks.

Q: 2. What type of fixed attachment is required for the heavy mount?

A: i would only mount to a stud or as aforementioned wood wall/plywood. do not mount onto sheetrock with anchor, you'll be asking for trouble. The mount is designed to attach to a range of stud spacings you should be able to find

Q: 3. Can you please clarify the 20' lateral extension? Is this in addition to the arm extension, so that if I wanted to 'Slide' and then extend it further, for a total of 40''+ to the right/left?

A: This mount can be extended 3.1 to 23.6 from the Wall. You can then slide the unit 20 from left to right. Those are two different specs that are both around 20 each, you would not get a total of 40 . You would have the ability to extend it from the wall around 20 and you can go from left to right 20 .

Q: 4. Will this work for the odyssey g9?

A: Yes it will. Samsung 48.8" Odyssey G9 32:9 240 Hz Curved HDR NVIDIA G-SYNC VA Gaming Monitor BH #SALC49G97TSS • MFR #LC49G97TSSNXDC: VESA Mounting-Hole Pattern 100 x 100 mm Kanto Living M300 Full Motion Wall Mount for 26 to 55" Displays (Black) BH #KAM300 Mounting-Hole Pattern 100 x 100 mm 150 x 100 mm 200 x 100 mm 200 x 150 mm 200 x 200 mm 200 x 300 mm 200 x 400 mm 300 x 200 mm 300 x 300 mm 400 x 200 mm 400 x 300 mm 400 x 400 mm

Q: 5. Is this mount capable of portrait orientation mounting of a display 400 x 200 Sharp PN-B401 40" or just landscape?

A: yes just need to move adapters around- very strong mount

Q: 6. will this fit 30 cm wide by 20 cm high tv mounting holes?

A: The FMX2C is compatible with a 300x200 VESA pattern, and as long as your TV is under the weight limit, it will be compatible. Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.

Q: 7. How far are the wall mounting screws from each other?

A: The vertical distance between the mounting holes is 10.5". Feel free to contact us directly using the Support button on our website if you have any additional questions, thanks.

Q: 8. Product description says it can rotate 90 degrees, however in your install video it looks like the tv can only rotate no more than 45 degrees, probably based upon its size. What is the largest size tv that can rotate to a full 90 degrees?

A: That 90 degree figure is likely to be the total left to right rotation.

Q: 9. can this be installed on metal studs. if yes, does it need special anchors?

A: Yes indeed, but metal stud hardware is NOT included. Pick that up at your local home improvement store.

Q: 10. Would like a full motion that allows for adjusting 77" TV left to right once mounted to ensure it being centered on the wall. Ideas of make to search thru?

A: This full motion wall mount will work with a 77-inch TV, and allow the TV to come out from the wall be moved to the left or right. But once it is installed, you would not be able to move the center, when the TV is flush to wall.