The white Shure Snap-Fit Windscreen for DL4 and DH5 DuraPlex Microphones is offered in a pack of 3 and snaps into place over the mic capsule to help reduce wind noise and cut down on plosives and breath noise from the speaker. The windscreen fits the DL4 lavalier and the DH5 headset microphones and can not be used with frequency/presence caps.

Reduces Breath and Wind Noise    Snaps in Place for Secure Fit    Fits DL4 DuraPlex Lavalier Mic    Fits DH5 DuraPlex Headset Mic

Related Questions and Answers

Q: 1. Should this hold the capsule tight or should it be able to rotate when the clip is attached?

A: This should be snug enough to hold onto the capsule but still able to be removed.

Q: 2. Does it fit the Rode Lavalier Go?

A: No, I don't think the Shure Snap-Fit Windscreen for DL4 and DH5 DuraPlex Microphones is going to work with the Rode Lavalier GO because the microphones that this windscreen is designed to fit are flat and the windscreen snaps on. As a better option for the Lavalier GO, you can use the WindTech Windscreen- 3/16" - 3-Pack, White (B&H # WI2300PW).

Q: 3. what size is the allen wrench for that tiny set screw? I have about 50 of these windscreens and I'm very satisfied with their effectiveness except for that set screw

A: Per a Shure representative, the hex key required is a #2 .9mm or .035".

Q: 4. what should the top of the me2 lavalier look like?how does the windscreen stay on?

A: The top of my lavalier mic has a flat head to it. The windscreen fits on snuggly. I have never had a problem with the windscreen coming loose or falling off the lavalier mic.

Q: 5. Does this fit the Audio Technica AT8035?

A: No, the Audio-Technica AT8124F would not be suitable for the AT8035. For that microphone the Rycote Standard Hole Classic Softie (BH #RYS24M) would be recommended.

Q: 6. is this fit for sennheiser mke2 gold ?

A: Unfortunately it is not. The correct wind screen for the MKE 2 is B&H # SEMZWA that you can find on the B&H website.

Q: 7. Will this fit on a Sennheiser me2 version 2, or only one the original me2?

A: The Auray Metal Windscreen for Senal OLM2 and Sennheiser ME2 Microphones can be used on both the Sennheiser ME 2 and ME 2-II Omnidirectional Lavalier Microphones.

Q: 8. Would this work on a shure sm7b mic?

A: No, the Shure RK345B Broadcast-Style Windscreen is specifically designed for use with the Shure SM7dB Vocal Microphone. The correct windscreen for the Shure SM7B Vocal Microphone is the Shure RK345 Windscreen for SM7, SM7A, and SM7B (B&H # SHRK345).

Q: 9. Does anyone have a good suggestion of an additional windscreen to use on top of this? For outdoor applications etc?

A: For a furry windshield to go on top of the Shure A412MWS Metal Windscreen when working outdoors, you may be able to use the K-Tek KR-50-70 Fur Windsock for Ball-Type Handheld Microphones (B&H # KTKR5070), or you can make your own fur windshield using the Bubblebee Industries The Piece-A-Fur Wind Protection - Black (B&H # BUBBIPAFBK), which is a 14.1 x 4.3" piece of imitation fur that you can cut and sew to fit over the metal windscreen. If you are using the Shure MX412 and MX418 Gooseneck Microphones and working indoors or outdoors with low wind, you can use the Shure RK412WS Windscreens - Set of 4 (B&H # SHRK412WS) as standard foam windscreens instead of the Shure A412MWS Locking Metal Windscreen.

Q: 10. Will this fit the Tentacle Lavalier mic?

A: Yes, the Auray Metal Windscreen for Senal OLM2 and Sennheiser ME2 Microphones will also work with the Tentacle Sync Omnidirectional Lavalier Microphone.